Cams
4/4/05, 12:02 AM
#1
Member
Thread Starter
Join Date: March 1, 2005
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Hey I was wondering if anyone had any info about when some cams are going to be available for the 05 GT and this new 3v 4.6L. I am really looking for something with a nice lopey idle and a good power gain and was just curious if anyones got cams in production or will in the near future. Thanks ~Trent
4/4/05, 05:01 AM
#2
Bullitt Member
Join Date: March 17, 2005
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
no one as of yet has any available. I know that SHM, PHP and Livernois tried, couldn't get them right. Motors blew! So I think i'll hold off until someone gets a set right.
Crane and Comp are both working on some now as well. We'll see who gets theres out first.
Crane and Comp are both working on some now as well. We'll see who gets theres out first.
4/4/05, 01:27 PM
#4
Member
Thread Starter
Join Date: March 1, 2005
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info guys, I hadn't heard of those first three companies and that stinks that they blew the motors...I would trust Crane or Comp though because I've seen their stuff and it performs really well, any idea on how soon they will be available?
4/4/05, 02:54 PM
#5
Bullitt Member
Join Date: March 17, 2005
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by BlackBulletGT@April 4, 2005, 3:30 PM
Thanks for the info guys, I hadn't heard of those first three companies and that stinks that they blew the motors...I would trust Crane or Comp though because I've seen their stuff and it performs really well, any idea on how soon they will be available?
Thanks for the info guys, I hadn't heard of those first three companies and that stinks that they blew the motors...I would trust Crane or Comp though because I've seen their stuff and it performs really well, any idea on how soon they will be available?
you've never heard of Pauls High Performance & Sean Hyland Motorsports?
as for the heads, the flow numbers we posted a while ago. If you're waiting on dyno numbers, those will be up before April 14th.
4/5/05, 06:56 AM
#6
SHM is only a 1 hour drive from my place. The stuff they do to motors is incredible. I'm making a trip down over there this month to see if there are any new goodies for me to buy 
4/5/05, 04:08 PM
#7
Member
Thread Starter
Join Date: March 1, 2005
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
My bad I just didn't catch the abbreviations I've heard of Sean Hyland Motorsports and nothing but good things about them, are they still working on some R&D for cams though? and when could I expect to feasibly see cams available on the market? Thanks again yall for the help!
Thread
Thread Starter
Forum
Replies
Last Post