BBK vs. Steeda UDPs
#43
Tillman, I will be calling in my payment first thing in the morning 2-15-2007
#45
Former Vendor
Join Date: January 11, 2007
Location: Aston, PA
Posts: 2,594
Likes: 0
Received 0 Likes
on
0 Posts
No problem at all. So that'll be 3 possibly 4 paid for. One more and I can ship them out!
I'll be in tomorrow around 10AM EST. We weren't in today at all. **** snow. If it was just that, would have been no problem, but it was freezing rain all day and PennDOT didn't feel like plowing until it was over?
CR
Tillman Speed
I'll be in tomorrow around 10AM EST. We weren't in today at all. **** snow. If it was just that, would have been no problem, but it was freezing rain all day and PennDOT didn't feel like plowing until it was over?
CR
Tillman Speed
#46
Payment sent VIA Paypal 02-14-2007 21:30 hrs.
#47
CR,
What sort of real world no bull sh%t power gains could one expect from these pullies?
What sort of real world no bull sh%t power gains could one expect from these pullies?
#48
Former Vendor
Join Date: January 11, 2007
Location: Aston, PA
Posts: 2,594
Likes: 0
Received 0 Likes
on
0 Posts
Okay, I got 3 paid for awaiting two...
As far as power goes. I have heard so many different numbers, but it really is give or take. This all depends on what kind of engine load we're talking about. Some videos are claiming 8RWHP gain to the wheels on a dynojet? I wish we had time to do baserun stuff, eventually we will, but by then it won't matter. We've been so swamped, it's been hard to get time to experiment!
CR
Tillman Speed
As far as power goes. I have heard so many different numbers, but it really is give or take. This all depends on what kind of engine load we're talking about. Some videos are claiming 8RWHP gain to the wheels on a dynojet? I wish we had time to do baserun stuff, eventually we will, but by then it won't matter. We've been so swamped, it's been hard to get time to experiment!
CR
Tillman Speed
#49
#52
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
All 3 of use Bold Moves people should have ordered, plue Lowe, that should be 4. Right?
#54
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
I think the guy that was going to call, went ahead and did the paypal route.... might want to check.
#56
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
Awesome CR ! Will you email us with the shipping details when you get them?
#57
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
Also... The same 3 of us are wanting to buy gears pretty soon. Ford Racing gears that is... Do you deal in these? If so, can we work out a group buy for those?
Just trying to get you some business!
Just trying to get you some business!
#58
Former Vendor
Join Date: January 11, 2007
Location: Aston, PA
Posts: 2,594
Likes: 0
Received 0 Likes
on
0 Posts
Yes I will gladly send over tracking numbers.
Tell me what gear ratio, and what they go for regularly on other sites, and I can probably hook you up no problem. See how much I can save you!
CR
Tillman Speed
Tell me what gear ratio, and what they go for regularly on other sites, and I can probably hook you up no problem. See how much I can save you!
CR
Tillman Speed
#59
Thread Starter
Join Date: September 19, 2005
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
Sure. We need 3 sets. 1 set 3.73 (Price I found was around $173) and 2 sets of 4:10 (Price I found was around $220) Both with free shipping.
Do your magic!
Do your magic!
#60
Mach 1 Member
Join Date: August 10, 2005
Location: Sarasota
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, but you can't compare Roush to STEEDA. Steeda does extensive R&D and has been selling bolt on parts for over 15yrs. Roush a lot of times will buy someone's design and put their name on it. I think that is what they did with the intake now available for the 05-07 models (previously the airrade intake I think).
Once again, 90% of the people that have done pulleys on the s197 platform are using STEEDA with zero problems.