Anybody running Stinger's with an O/R X-pipe?
#1
Anybody running Stinger's with an O/R X-pipe?
I am currently running MAC axlebacks with a Bassani catalytic X. I just picked up a set of Stingers and was thinking that since they are a flow-through type muffler that the cats would no longer be needed to help muffle the rasp of the chambered muffler. However, before I go through the ***-pain of converting my x-pipe to catless I figured I'd ask for opinions; good or bad. Let me know what ya'll think.
#2
I have Borla Stingers mated to Hooker long tubes and o/r x on my Mach. There is some rasp above 4000. I am looking for an o/r h or prochamber to see if it quiets some of raspiness.
When I was running the stock manifolds and Bassani catted x, I didn't notice much rasp at all. Axlebacks may sound a bit different from the catback but I would image you would have similar results.
When I was running the stock manifolds and Bassani catted x, I didn't notice much rasp at all. Axlebacks may sound a bit different from the catback but I would image you would have similar results.
#3
Hey Quikstang, How do the Macs and Bassani catted x-pipe sound? Do you have any soundclips or videos. I'm gonna be ordering the Bassani x for my next mod and I have the Macs already on. Sorry for going off topic just wondering how it sounds together.
#4
Well, it's not that I dislike the sound I guess I just get a little bored. There is a raspy-twang that happems at times with the MAC's but nothing too obtrusive. As for the video clips, I don't have anything as of yet but I can certainly try to capture a few for you this weekend.
#5
Bullitt Member
Join Date: December 8, 2006
Location: Tewksbury, MA
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
I am currently running MAC axlebacks with a Bassani catalytic X. I just picked up a set of Stingers and was thinking that since they are a flow-through type muffler that the cats would no longer be needed to help muffle the rasp of the chambered muffler. However, before I go through the ***-pain of converting my x-pipe to catless I figured I'd ask for opinions; good or bad. Let me know what ya'll think.
#6
Cool, I appreciate you getting back to me. I have one more question basicly the major deciding factor on me buying the x-pipe. Do the macs get noticably louder or does it only add rasp and stay somewhat the same level of loudness? I'm looking to make the exhaust louder without going catless. That would be really awesome if you could get clips
#7
Cool, I appreciate you getting back to me. I have one more question basicly the major deciding factor on me buying the x-pipe. Do the macs get noticably louder or does it only add rasp and stay somewhat the same level of loudness? I'm looking to make the exhaust louder without going catless. That would be really awesome if you could get clips
#9
#10
Cobra Member
Join Date: September 10, 2004
Location: Austin TX
Posts: 1,456
Likes: 0
Received 0 Likes
on
0 Posts
Yea Bassani and SLP both make modular x pipes, of a 3 piece design. You can either run hiflo cats with the x pipe crossover, or you can put in the race pipes, which are just pieces of round tubing which is like running an o/r X.
I love it with the HiFlos right now, pretty nice growl when daily driving then it really roars when you get on it. Im putting together a good video right now, but Windows Media Player keeps giving these weird Error messages and won't let me run back the video - Ill keep you posted.
I love it with the HiFlos right now, pretty nice growl when daily driving then it really roars when you get on it. Im putting together a good video right now, but Windows Media Player keeps giving these weird Error messages and won't let me run back the video - Ill keep you posted.
#11
Legacy TMS Member
review my old thread, there are clips of the borlas with the bassani x with both cats and no cats installed
link: http://forums.bradbarnett.net/showth...ht=borla+corsa
link: http://forums.bradbarnett.net/showth...ht=borla+corsa
#12
Legacy TMS Member
Join Date: January 9, 2005
Location: New Carlisle, Ohio (20 miles north of Dayton)
Posts: 6,982
Likes: 0
Received 6 Likes
on
6 Posts
review my old thread, there are clips of the borlas with the bassani x with both cats and no cats installed
link: http://forums.bradbarnett.net/showth...ht=borla+corsa
link: http://forums.bradbarnett.net/showth...ht=borla+corsa
I was wondering if you were going to jump in on this ...I may also tell you guys Tom281 is running resonators to eliminate some of the drone. I can tell you that from following him down the highway it sure has a sweeeeettt!!!! sound to it. He says they have knock the drone down a bunch!!!
Scott
#13
Yea Bassani and SLP both make modular x pipes, of a 3 piece design. You can either run hiflo cats with the x pipe crossover, or you can put in the race pipes, which are just pieces of round tubing which is like running an o/r X.
I love it with the HiFlos right now, pretty nice growl when daily driving then it really roars when you get on it. Im putting together a good video right now, but Windows Media Player keeps giving these weird Error messages and won't let me run back the video - Ill keep you posted.
I love it with the HiFlos right now, pretty nice growl when daily driving then it really roars when you get on it. Im putting together a good video right now, but Windows Media Player keeps giving these weird Error messages and won't let me run back the video - Ill keep you posted.
review my old thread, there are clips of the borlas with the bassani x with both cats and no cats installed
link: http://forums.bradbarnett.net/showth...ht=borla+corsa
link: http://forums.bradbarnett.net/showth...ht=borla+corsa
I was wondering if you were going to jump in on this ...I may also tell you guys Tom281 is running resonators to eliminate some of the drone. I can tell you that from following him down the highway it sure has a sweeeeettt!!!! sound to it. He says they have knock the drone down a bunch!!!
Scott
Scott
#14
Cobra Member
Join Date: September 10, 2004
Location: Austin TX
Posts: 1,456
Likes: 0
Received 0 Likes
on
0 Posts
I ended up not even getting to the Race Pipe install...My moms Steeda springs came for her CS/GT and a friend and I ended up installing them tonight. Sorry!
#15
Legacy TMS Member
Join Date: January 9, 2005
Location: New Carlisle, Ohio (20 miles north of Dayton)
Posts: 6,982
Likes: 0
Received 6 Likes
on
6 Posts
Ahhh....I see. I have the same Bassani modular-X with the cats currently installed. I look foward to the vid.
Dang Tom....that was some impressive reading. It's people like you who take the time to do stuff like that that make forums like this worth while. Thanks for the link and all the knuckle busting.
Thanks for the info. I think I am going to really enjoy the Borla's. Although, you mentioned the need for resonators, is that in addition to the cats?
Dang Tom....that was some impressive reading. It's people like you who take the time to do stuff like that that make forums like this worth while. Thanks for the link and all the knuckle busting.
Thanks for the info. I think I am going to really enjoy the Borla's. Although, you mentioned the need for resonators, is that in addition to the cats?
Hey Mike,
The reason for the resonators is the drone that is created by the Borla's They do sound awesome but the drone can be pretty bad. If I were you I would just get the Borla's and see what you think. The drone doesn't bother some guys. You can always get the resonators later if it bothers you. They are really cheap.
Scott
#16
Hey Mike,
The reason for the resonators is the drone that is created by the Borla's They do sound awesome but the drone can be pretty bad. If I were you I would just get the Borla's and see what you think. The drone doesn't bother some guys. You can always get the resonators later if it bothers you. They are really cheap.
Scott
The reason for the resonators is the drone that is created by the Borla's They do sound awesome but the drone can be pretty bad. If I were you I would just get the Borla's and see what you think. The drone doesn't bother some guys. You can always get the resonators later if it bothers you. They are really cheap.
Scott
#17
Legacy TMS Member
I have Dynomax resonators, and have them welded in on the over-axle pipes after the H pipe.
They sound great with Borlas and an offroad H pipe.
Oh, thanks for the compliments guys, I appreciate it.
They sound great with Borlas and an offroad H pipe.
Oh, thanks for the compliments guys, I appreciate it.
#18
Hey Tom, do you think a high flow cat would effect the same results as those Dynomax resonators?
#19
Legacy TMS Member
The Bassani catted X with Borlas had some drone- not much, but some. In comparison to the offroad H with resonators, there is no drone. Sound-wise between the two, its hard to compare them. The catted X sounded really good, racy but yet refined if that makes sense. The offroad H with resonators sounds more old school, more like a late '60s Mustang- deep and muscular. I'd be happy with either one, mainly I went the way I did because I didn't want to run cats and around here there is no emissions checks.