Ponies on The Run!
Legacy TMS Member
Joined: October 7, 2006
Posts: 2,701
Likes: 1
From: Monrovia, CA
Team Mustang Source
Joined: September 14, 2005
Posts: 3,477
Likes: 1
From: SoCal
I've wanted to do it as well but...
If it's screwed up then it's a 200+ dollar screw up.
I haven't seen any other Bullitt grille with this mod, what if it looks worse. Not wanting to be the guinea pig on this and the chance of an expensive slip has stopped me from doing it.
My .02
If it's screwed up then it's a 200+ dollar screw up.
I haven't seen any other Bullitt grille with this mod, what if it looks worse. Not wanting to be the guinea pig on this and the chance of an expensive slip has stopped me from doing it.
My .02
Cobra Member
Joined: November 15, 2007
Posts: 1,460
Likes: 0
From: Torrance, CA
I was thinking of taking my Dremel and on the backside of the Bullitt grill removing some of the closed in grids. In other words making it completely open from one side to the other. I have hood pins so I'm not worried about the hood.
Aren't the billet grilles fully open. If its OK for them, wouldn't if be OK for me?
I just think it looks stupid in photos to be only open in the middle. Plus it would be easier to clean too.
Comments, please.
Aren't the billet grilles fully open. If its OK for them, wouldn't if be OK for me?
I just think it looks stupid in photos to be only open in the middle. Plus it would be easier to clean too.
Comments, please.
I'm laughing at the fact that you're considering this headache because you don't like how it looks in pictures
My two cents, walk away from this diabolical plan
Team Mustang Source
Joined: September 14, 2005
Posts: 3,477
Likes: 1
From: SoCal
There is a god.... OK, maybe that's a little much. How bout a suspension fairy ?
Clunk-a-potomas is gone
. Front-end rattling, clunking and generally being a huge PITA is over .
Being that I'm a little hardheaded... I decided to again look at the swaybar end-links. I hammered and jacked the a-arm up and down, looking for something that would rattle when I smacked it with the rubber mallet.... After getting pretty close to saying F@#k it, dad hit a sweet spot on the sway bar and you could hear it was loose. I was looking at the wrong end of the end-link, it was the bottom nuts that were looser than a .50 ***** in a mining camp after pay day. Cinched 'em down with locktite, had to approx. the torque 'cause there was no-way in hell it would have worked without taking the whole shebang apart, and called it
good.
If it starts up again I'll know exactly what the problem is and then I'll take it apart and do it up right, but I don't think it's going to get loose anytime soon.
Clunk-a-potomas is gone
. Front-end rattling, clunking and generally being a huge PITA is over . Being that I'm a little hardheaded... I decided to again look at the swaybar end-links. I hammered and jacked the a-arm up and down, looking for something that would rattle when I smacked it with the rubber mallet.... After getting pretty close to saying F@#k it, dad hit a sweet spot on the sway bar and you could hear it was loose. I was looking at the wrong end of the end-link, it was the bottom nuts that were looser than a .50 ***** in a mining camp after pay day. Cinched 'em down with locktite, had to approx. the torque 'cause there was no-way in hell it would have worked without taking the whole shebang apart, and called it
good.
If it starts up again I'll know exactly what the problem is and then I'll take it apart and do it up right, but I don't think it's going to get loose anytime soon.
Legacy TMS Member
Joined: October 7, 2006
Posts: 2,701
Likes: 1
From: Monrovia, CA
There is a god.... OK, maybe that's a little much. How bout a suspension fairy ?
Clunk-a-potomas is gone. Front-end rattling, clunking and generally being a huge PITA is over .
Being that I'm a little hardheaded... I decided to again look at the swaybar end-links. I hammered and jacked the a-arm up and down, looking for something that would rattle when I smacked it with the rubber mallet.... After getting pretty close to saying F@#k it, dad hit a sweet spot on the sway bar and you could hear it was loose. I was looking at the wrong end of the end-link, it was the bottom nuts that were looser than a .50 ***** in a mining camp after pay day. Cinched 'em down with locktite, had to approx. the torque 'cause there was no-way in hell it would have worked without taking the whole shebang apart, and called it
good.
If it starts up again I'll know exactly what the problem is and then I'll take it apart and do it up right, but I don't think it's going to get loose anytime soon.
Clunk-a-potomas is gone
. Front-end rattling, clunking and generally being a huge PITA is over . Being that I'm a little hardheaded... I decided to again look at the swaybar end-links. I hammered and jacked the a-arm up and down, looking for something that would rattle when I smacked it with the rubber mallet.... After getting pretty close to saying F@#k it, dad hit a sweet spot on the sway bar and you could hear it was loose. I was looking at the wrong end of the end-link, it was the bottom nuts that were looser than a .50 ***** in a mining camp after pay day. Cinched 'em down with locktite, had to approx. the torque 'cause there was no-way in hell it would have worked without taking the whole shebang apart, and called it
good.
If it starts up again I'll know exactly what the problem is and then I'll take it apart and do it up right, but I don't think it's going to get loose anytime soon.
Shelby GT500 Member
Joined: November 22, 2006
Posts: 2,932
Likes: 0
From: Planet Earth
Nice Brain fixed and not a dime spent just sweat equity! 
I started to work of the vac lines on the Rooosh! I finished all of them except the Moroso Catch Can install. I going to have a aluminum billet plate made to hold the can just rear of the EVAP unit. So that'll be Sunday's project. I'll post a picture tomorrow of the lines, it go to dark to take one in natural light.
I started to work of the vac lines on the Rooosh! I finished all of them except the Moroso Catch Can install. I going to have a aluminum billet plate made to hold the can just rear of the EVAP unit. So that'll be Sunday's project. I'll post a picture tomorrow of the lines, it go to dark to take one in natural light.
Team Mustang Source
Joined: January 5, 2005
Posts: 13,223
Likes: 14
Brian best be good to Dad for Christmas ! glad stuff like that gets gone ! when something like that drives me bonkers I'll walk away & go do something and it's when I can't go try my fix is when I think of of ! grr aka during sex (how can I increase my boost ? then it comes to me)
Legacy TMS Member
Joined: May 24, 2006
Posts: 7,409
Likes: 0
From: San Diego
Wow Ford is actually doing some pretty cool things.
http://gizmodo.com/5431162/ford-sync...ents-next-year
http://gizmodo.com/5431162/ford-sync...ents-next-year
Wow Ford is actually doing some pretty cool things.
http://gizmodo.com/5431162/ford-sync...ents-next-year
http://gizmodo.com/5431162/ford-sync...ents-next-year
Cobra Member
Joined: September 6, 2005
Posts: 1,296
Likes: 2
From: Colorado
Way to f up my day Steelers.
Team Mustang Source
Joined: September 14, 2005
Posts: 3,477
Likes: 1
From: SoCal
Wow Ford is actually doing some pretty cool things.
http://gizmodo.com/5431162/ford-sync...ents-next-year
http://gizmodo.com/5431162/ford-sync...ents-next-year
http://jalopnik.com/5429980/more-bea...ds-50+liter-v8
It'll be interesting to see it once all the specs are released
Legacy TMS Member
Joined: May 24, 2006
Posts: 7,409
Likes: 0
From: San Diego
Next mod for the stang.
Tell me about it. I fully believed they were going to win. Can't believe that SOB made that catch. The CB should've just pushed his *** out.
Tell me about it. I fully believed they were going to win. Can't believe that SOB made that catch. The CB should've just pushed his *** out.
Cobra Member
Joined: September 6, 2005
Posts: 1,296
Likes: 2
From: Colorado
Tell me about it, the Seachickens lost to Tampa Bay who is 2-12... How the F*** do you loose 34-7 to Tampa F**king Bay ?
Team Mustang Source
Joined: September 14, 2005
Posts: 3,477
Likes: 1
From: SoCal
Legacy TMS Member
Joined: May 24, 2006
Posts: 7,409
Likes: 0
From: San Diego
Just found out about a local radio station that does this great bit called "War of the roses". Apparently every hour on the hour they take a listener that suspects their significant other is cheating. Then they call the suspected cheater and pose as a flower shop. They tell them they've won a dozen free roses and can send them to anyone. Drama ensues. Here's one from the website.
http://www.magic925.com/magicpodcast...r_Of_The_Roses
http://www.magic925.com/magicpodcast...r_Of_The_Roses
Last edited by LEO_06GT; Dec 21, 2009 at 10:53 AM.