Ponies on The Run!
What's a MHL? 
Shouldn't the trait of a DD be reliability? All this engine swapping and hot rodding will be hardly that.
Though messing with a 429 sounds uber cool, not sure if I'd want a hopped up DD.
The CS clearance has got to be way more than the CDC Classic.

Shouldn't the trait of a DD be reliability? All this engine swapping and hot rodding will be hardly that.
Though messing with a 429 sounds uber cool, not sure if I'd want a hopped up DD.
The CS clearance has got to be way more than the CDC Classic.
Chris.. Gracie Jiu-Jitsu $55/mo, Muay Thai $75/mo, Judo.. free!
Want to start that sh*t again? 
Oh btw Leo, I bought a pack of Djarum Golds lastnight.
You'd like to see those results wouldn't you. :gay:
Seriously, mine is lower, not sure by how much though.

Oh btw Leo, I bought a pack of Djarum Golds lastnight.

You'd like to see those results wouldn't you. :gay:
Seriously, mine is lower, not sure by how much though.
The results would probably be on the low side just like your HP/TQ numbers.
(You started it)I'm sure the CDC is lower but not by much.

Koji here's a view...
I use a wire brush attachment on an air tool to clean the rust off. Then I used an acetone damp towel to wipe off any dust and grease. The hardest part was in the masking where the paint shouldn't go. Once that done your on EZ street!


You're right, my numbers are a tad lower than yours.. you got me there.
But I won't mention that you're still running the lady finger rods... oops! I just did.


btw, GJJ eats wrestlers and Judokas for breakfast. Royce already proved than a number of times.
He bench presses 310 pounds and he weighs only 150 pounds...and this is before he eats his Cheerios! 
I'll take a picture of the spray can tonight. I know it was a Krylon product actually used for metal outside patio furniture. 
Koji here's a view...
I use a wire brush attachment on an air tool to clean the rust off. Then I used an acetone damp towel to wipe off any dust and grease. The hardest part was in the masking where the paint shouldn't go. Once that done your on EZ street!



Koji here's a view...
I use a wire brush attachment on an air tool to clean the rust off. Then I used an acetone damp towel to wipe off any dust and grease. The hardest part was in the masking where the paint shouldn't go. Once that done your on EZ street!



All I can say is your son will have his work cut out for him.
As you can see I've worked this scenario out quite a bit. Although everything above you see is what I did to my 429 in my Torino, except the headers, and I drove that from La Habra to Compton daily for 12 years. The only thing I replaced frequently was rear tires

Originally Posted by TacoBill
The CS clearance has got to be way more than the CDC Classic.
Smokes, cloves.... blech






But the car looks SA-NI-TAR-Y!