GT350 for sale.
8/5/06, 07:14 AM
#1
Mach 1 Member
Thread Starter
Join Date: January 22, 2006
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
GT350 for sale.
What years did they produce the GT350? There is a red one up the road nfrom me for sale. I need to take a closer look at it and speak to the seller and when I do I will take some pics for everyone. It looks like 65 or 66 styling? The paintwork looked ok but I was driving past and didnt have the time to stop.
8/5/06, 07:53 AM
#2
The Mustang Source FOUNDER
Join Date: January 29, 2004
Location: Vestavia Hills, Ala.
Posts: 9,887
Likes: 0
Received 11 Likes
on
10 Posts
1965-1970 & 1984 1/2
If it's a '66 it'll have a back seat. All '65s only had the front buckets. A '66 will have a quarter window whereas the '65s had louvers. A '65 will have a smooth side scallop and a '66 will have a scoop.
1965:
1966:
If it's a '66 it'll have a back seat. All '65s only had the front buckets. A '66 will have a quarter window whereas the '65s had louvers. A '65 will have a smooth side scallop and a '66 will have a scoop.
1965:
1966:
8/5/06, 08:18 AM
#3
Mach 1 Member
Join Date: January 2, 2006
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
Make sure its real. There are a ton of clones out there, and the real ones are pretty expensive. if the car's only $30-40k, its not real. If you want a clone, they are pretty nice, but do make sure you know what it is.
8/5/06, 10:11 AM
#5
Member
Join Date: July 24, 2006
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Look for a Shelby Vin Plate on the drivers side inner fender, should have a SFM......... sequential number, and this number will be stamped in the psgr side inner fender apron, near the shock tower....
Under this driver side vin plate will be a ford vin number, must have a "K" as the 5th digit.."289 hipo" in order to be a Shelby...
Also look for traction bar setup on rear end, overides, or underides, depending on year....,Check for 289 hipo harmonic balancer,,,should be about 2" thick, versus 1" thick for normal 289....
Hipo Alternator Pulley 4" diameter, racing seatbelts, not mustang...66 will have a Cobra tach, on top of dash, 65 will have a pod on dash with tach, oil presure gauge....
If it's real, it will not be had to see the difference...
Mark
Under this driver side vin plate will be a ford vin number, must have a "K" as the 5th digit.."289 hipo" in order to be a Shelby...
Also look for traction bar setup on rear end, overides, or underides, depending on year....,Check for 289 hipo harmonic balancer,,,should be about 2" thick, versus 1" thick for normal 289....
Hipo Alternator Pulley 4" diameter, racing seatbelts, not mustang...66 will have a Cobra tach, on top of dash, 65 will have a pod on dash with tach, oil presure gauge....
If it's real, it will not be had to see the difference...
Mark
8/5/06, 11:30 AM
#7
Mach 1 Member
Thread Starter
Join Date: January 22, 2006
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by markboss
Look for a Shelby Vin Plate on the drivers side inner fender, should have a SFM......... sequential number, and this number will be stamped in the psgr side inner fender apron, near the shock tower....
Under this driver side vin plate will be a ford vin number, must have a "K" as the 5th digit.."289 hipo" in order to be a Shelby...
Also look for traction bar setup on rear end, overides, or underides, depending on year....,Check for 289 hipo harmonic balancer,,,should be about 2" thick, versus 1" thick for normal 289....
Hipo Alternator Pulley 4" diameter, racing seatbelts, not mustang...66 will have a Cobra tach, on top of dash, 65 will have a pod on dash with tach, oil presure gauge....
If it's real, it will not be had to see the difference...
Mark
Under this driver side vin plate will be a ford vin number, must have a "K" as the 5th digit.."289 hipo" in order to be a Shelby...
Also look for traction bar setup on rear end, overides, or underides, depending on year....,Check for 289 hipo harmonic balancer,,,should be about 2" thick, versus 1" thick for normal 289....
Hipo Alternator Pulley 4" diameter, racing seatbelts, not mustang...66 will have a Cobra tach, on top of dash, 65 will have a pod on dash with tach, oil presure gauge....
If it's real, it will not be had to see the difference...
Mark
WOW.
8/5/06, 07:29 PM
#8
Member
Join Date: July 24, 2006
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
You will find there are far more fakes than real 65-66 Shelbys......Only about 2600 real cars for the total of both years....take into account the number that have been destroyed....probably about half survived...
When big money is at stake, you will have rebodies, and fake Vin's....
If you need an opinion, let me know, been doing this for about 25 years...
Mark
When big money is at stake, you will have rebodies, and fake Vin's....
If you need an opinion, let me know, been doing this for about 25 years...
Mark
8/6/06, 03:30 AM
#9
Mach 1 Member
Thread Starter
Join Date: January 22, 2006
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
Hope to go take a look at it today. I know I could never afford it but I will see what he is asking for it all the same. Maybe somebody on here might want it. Heard that a lot of people have been stopping and looking at it.
Also thanx for the advice Mark.
Also thanx for the advice Mark.
Thread
Thread Starter
Forum
Replies
Last Post
DerekShiekhi
GT350
1
9/29/15 04:35 AM