The Mustang Source - Ford Mustang Forums

The Mustang Source - Ford Mustang Forums (https://themustangsource.com/forums/)
-   Midwest (https://themustangsource.com/forums/f642/)
-   -   Midwest TMS'ers General Communication Thread (https://themustangsource.com/forums/f642/midwest-tmsers-general-communication-thread-459585/)

cdynaco 2/8/10 10:31 PM

ha! An old buddy around here sells for White's. They went after the fire fighter market and the big fires out west have been a gold mine to them.

dly 2/9/10 06:18 AM

1 Attachment(s)
Man go to work and you guys are talking about Crap in my Backyard and went I come home its all about RailRoads.:screwy:

We deal with NS railway for all our steel. We get a train in everyday except Christmas. They keep 2 sets of Power on our site just for us. I also ran the small internal Engines on site to move the steel to its proper location.

Attachment 72654

BoogieNights 2/9/10 06:21 AM

Dont feel bad Dly. I leave for a couple days flying to Germany than Kuwait and crap hit the fan. Anyways, I am oin Frankfurt awaiting a flight in about an hour to Kuwait. It is so boring but the eye candy is nice here in Germany. :nice:

Glenn 2/9/10 11:54 AM


Originally Posted by BoogieNights (Post 5813861)
Dont feel bad Dly. I leave for a couple days flying to Germany than Kuwait and crap hit the fan. Anyways, I am oin Frankfurt awaiting a flight in about an hour to Kuwait. It is so boring but the eye candy is nice here in Germany. :nice:

post pics of the eye candy Yo lol

cdynaco 2/9/10 01:35 PM

:agree:

dly 2/9/10 03:23 PM

Here's some candy

http://www.myidolpops.com/store/prod...products_id=40

:devil::metal::rofl2:

tom281 2/9/10 03:29 PM

Clicked on the link with great optimism...... :D





soon found disappointment. :(





:rofl2:

70MACH1OWNER 2/9/10 04:31 PM


Originally Posted by dly (Post 5814061)
Here's some candy

http://www.myidolpops.com/store/prod...products_id=40

:devil::metal::rofl2:


Only you could have found these Darrell.:poke::jester:

BoogieNights 2/9/10 05:11 PM


Originally Posted by Glenn (Post 5813983)
post pics of the eye candy Yo lol


Sorry I didnt get any pics of the eye candy. I was drooling to much.:heh::jester:

frdtch05gt 2/9/10 10:57 PM

I did the dreaded spark plug removal on my car this morning, thankfully they all came out pretty easily. A few of them did squeak a bit on the way out, but they came out with no drama. I had to pick up some anti-sieze from the parts store, so it isn't totally done yet, but I'll finish that tomorrow and it'll be all good. :D

2k7gtcs 2/9/10 11:02 PM


Originally Posted by frdtch05gt (Post 5814395)
I did the dreaded spark plug removal on my car this morning, thankfully they all came out pretty easily. A few of them did squeak a bit on the way out, but they came out with no drama. I had to pick up some anti-sieze from the parts store, so it isn't totally done yet, but I'll finish that tomorrow and it'll be all good. :D


I remember how much I dreaded that job. Mine were the same. Breaking them loose seemed to be the scariest part. I think it calls for copper anti-seize or something with a higher heat tolerance if I remember right?

70MACH1OWNER 2/10/10 04:31 AM


Originally Posted by 2k7gtcs (Post 5814398)
I remember how much I dreaded that job. Mine were the same. Breaking them loose seemed to be the scariest part. I think it calls for copper anti-seize or something with a higher heat tolerance if I remember right?


Copper or Nickel antiseize will work fine. I also remember that butt hole puckering event.:( I think that was worse than laying the jig saw to my hood!:D

Glenn 2/10/10 05:16 AM


Originally Posted by dly (Post 5814061)
Here's some candy

http://www.myidolpops.com/store/prod...products_id=40

:devil::metal::rofl2:

ha cool

BoogieNights 2/10/10 08:19 AM


Originally Posted by frdtch05gt (Post 5814395)
I did the dreaded spark plug removal on my car this morning, thankfully they all came out pretty easily. A few of them did squeak a bit on the way out, but they came out with no drama. I had to pick up some anti-sieze from the parts store, so it isn't totally done yet, but I'll finish that tomorrow and it'll be all good. :D


Originally Posted by 2k7gtcs (Post 5814398)
I remember how much I dreaded that job. Mine were the same. Breaking them loose seemed to be the scariest part. I think it calls for copper anti-seize or something with a higher heat tolerance if I remember right?


Originally Posted by 70MACH1OWNER (Post 5814447)
Copper or Nickel antiseize will work fine. I also remember that butt hole puckering event.:( I think that was worse than laying the jig saw to my hood!:D

Wussies. I never put anti-seize on my sparky plugs. :poke::jester:

frdtch05gt 2/10/10 11:13 AM

I just finished the job, all is good. I used nickel anti-sieze, it'll be fine. :D The ones that squeaked coming out did not squeak going back in.

BoogieNights 2/10/10 11:18 AM


Originally Posted by frdtch05gt (Post 5814578)
I just finished the job, all is good. I used nickel anti-sieze, it'll be fine. :D The ones that squeaked coming out did not squeak going back in.

Thats what she said:jester:

frdtch05gt 2/10/10 11:55 AM

Oh nice, thanks for turning that dirty. I got a good laugh from that one though. :D

BoogieNights 2/10/10 12:10 PM


Originally Posted by frdtch05gt (Post 5814592)
Oh nice, thanks for turning that dirty. I got a good laugh from that one though. :D


No prob :nice:

I couldnt resist :jester:

Phorty 2/10/10 12:14 PM

Any of you Chicago area guys feel the earthquake last night? First earthquake I've ever felt, woke me and the wife (and dog) up. Thought maybe my furnace was going to explode or maybe a snow plow. Then, as I was going to bed I said I bet it was an earthquake...

BoogieNights 2/10/10 12:18 PM

You mean they have earthquakes way up there??


All times are GMT -6. The time now is 08:16 PM.


© 2024 MH Sub I, LLC dba Internet Brands