2005-2009 Mustang Information on The S197 {Gen1}

Finally decided to poist some pics.

Thread Tools
 
Search this Thread
 
Old 11/29/09 | 01:37 PM
  #1  
Cooper424's Avatar
Thread Starter
V6 Member
 
Joined: July 9, 2008
Posts: 80
Likes: 0
From: New Jersey
Finally decided to poist some pics.

Post** some pics.

So here she is, i've been a forum member for a pretty long time but have just been too lazy to get her up here

2006 Windveil blue V6 auto








She's got a Cervinis B2 front chin spoiler, type IV functional ram air hood, Gt Grill, sideskirts, and rear bumper, Rear window louvers, 3d carbon side window louvers and rear blackout panel. 18"x8" Anarchite bullitt wheels in front with 18"x10" 3" Anarchite deep dish in the back. i really went for a "retro" sorta look with her. Yes, she is an automatic 6, and has no work done to the engine - but she's always a work in progress and sometime soon that's going to change because we plan on dropping in a bigger engine and maby a 6 speed.

i decided to work on the exterior first because i know i'm not really looking to get serious about racing until she's got more ponies under the hood. there isn't much more i want to cover on the outside, except maby replacing the stock rear spoiler for a cervinis ducktail/wing combo. That, and i'd like to add some retro looking stripes, but i haven't landed on what style yet, so i'll chop some into these pics soon.

tell me what you think!

Last edited by Cooper424; 11/29/09 at 01:38 PM.
Old 11/29/09 | 01:47 PM
  #2  
825LTRGT's Avatar
Mach 1 Member
 
Joined: December 13, 2008
Posts: 845
Likes: 7
From: Midwest
Sharp!
Old 11/29/09 | 02:09 PM
  #3  
Red Jay's Avatar
Cobra Member
 
Joined: September 9, 2009
Posts: 1,465
Likes: 0
From: Tulsa OK


nice, i like the way anthricate looks on blue. also, is the inner shoulder on the tire like worn away?
Old 11/29/09 | 03:26 PM
  #4  
Cooper424's Avatar
Thread Starter
V6 Member
 
Joined: July 9, 2008
Posts: 80
Likes: 0
From: New Jersey
y'know what, sure does look that way.. i got them used from a friend but i didn't notice any wear then, im gonna check that out.
Old 11/29/09 | 04:22 PM
  #5  
slipnotovk's Avatar
Mach 1 Member
 
Joined: June 28, 2006
Posts: 780
Likes: 0
From: Staten Island, NY
thats MEAN! love the whole look. just one critique, ever think about lowering it? i got a set of steeda ultralites on mine and it almost completely eliminated the raked 4x4 look. and didnt compromise ride quality one bit.
Old 11/29/09 | 06:55 PM
  #6  
Cooper424's Avatar
Thread Starter
V6 Member
 
Joined: July 9, 2008
Posts: 80
Likes: 0
From: New Jersey
Thanks bro! yeah i've really been putting alot of thought into lowering the car, i love the Mustangs "nose down - *** up" look, and i really tried to exaggerate that by adding the chin spoiler and painting it flat black, it gives it that 69'-73' chin look. i'd like to look into springs but i don't want to sacrifice that look by lowering the back TOO much, i was thinking about getting coilovers so i can adjust the look myself. the coilovers will also work pretty well because i don't want the nose dipped too much, because it's already just acouple inches worth of ground clearance as-is.
Old 11/29/09 | 07:33 PM
  #7  
MadGT's Avatar
Legacy Tms Member
 
Joined: August 17, 2007
Posts: 1,150
Likes: 57
From: Aldie, VA
mean looking, congrats!
Old 11/29/09 | 08:26 PM
  #8  
mustangGT90210's Avatar
I will buy Jack Stands!!!
 
Joined: July 13, 2008
Posts: 3,721
Likes: 29
From: Florida
I won't suggest lowering since you're not keen on it, but have you thought about a bigger(taller) tire for the back to better fill the wheel well?

Aside from that, mean lookin' 'Stang you got there
Old 11/29/09 | 08:30 PM
  #9  
Red Jay's Avatar
Cobra Member
 
Joined: September 9, 2009
Posts: 1,465
Likes: 0
From: Tulsa OK
Originally Posted by Cooper424
y'know what, sure does look that way.. i got them used from a friend but i didn't notice any wear then, im gonna check that out.
it kinda looks like the outter shoulder is worn a bit too, but not as bad.
Old 11/29/09 | 10:09 PM
  #10  
Cooper424's Avatar
Thread Starter
V6 Member
 
Joined: July 9, 2008
Posts: 80
Likes: 0
From: New Jersey
Originally Posted by mustangGT90210
I won't suggest lowering since you're not keen on it, but have you thought about a bigger(taller) tire for the back to better fill the wheel well?

Aside from that, mean lookin' 'Stang you got there
Actually, yes, that was the first thing i was thinking about. it's a great idea but i'm gonna be honest- i wouldn't know the right type of tire- im a total n00b when it comes to tires. any suggestions?

that fatter rear tire is exactly the look i want, i just need some help learning up on what to purchase.
Old 11/30/09 | 12:29 AM
  #11  
ManEHawke's Avatar
Shelby GT500 Member
 
Joined: January 30, 2004
Posts: 2,916
Likes: 0
From: Riverside, CA
255/45/18 for the front and 285/40/18 for the rear is the correct height.
If you want a nice fat tire you can go with the Nitto 295/45/18's

Looks like what you have now is shorter than stock, meatier tires would make your car complete.
Old 11/30/09 | 07:17 AM
  #12  
Cooper424's Avatar
Thread Starter
V6 Member
 
Joined: July 9, 2008
Posts: 80
Likes: 0
From: New Jersey
Originally Posted by ManEHawke
255/45/18 for the front and 285/40/18 for the rear is the correct height.
If you want a nice fat tire you can go with the Nitto 295/45/18's

Looks like what you have now is shorter than stock, meatier tires would make your car complete.
lol ooooooh it is never complete, but it'll bring it closer.
Old 11/30/09 | 07:29 AM
  #13  
DarkFireGT's Avatar
Cobra R Member
 
Joined: September 26, 2006
Posts: 2,019
Likes: 5
From: East Moline, IL
Looks great but PLEASE get rid of the door strips!!!
Old 11/30/09 | 01:06 PM
  #14  
mustangGT90210's Avatar
I will buy Jack Stands!!!
 
Joined: July 13, 2008
Posts: 3,721
Likes: 29
From: Florida
Originally Posted by Cooper424
Actually, yes, that was the first thing i was thinking about. it's a great idea but i'm gonna be honest- i wouldn't know the right type of tire- im a total n00b when it comes to tires. any suggestions?

that fatter rear tire is exactly the look i want, i just need some help learning up on what to purchase.
I can't suggest a size as I live in the truck world for that (unless you want 31x10.50x15s )

I think a taller, wider tire will do you a lot of good! With the taller tire though, you'll probably need a tuner to recalibrate the speedometer
Old 11/30/09 | 09:46 PM
  #15  
Cooper424's Avatar
Thread Starter
V6 Member
 
Joined: July 9, 2008
Posts: 80
Likes: 0
From: New Jersey
Yeah, that's true- but i do need a decent excuse to buy an electronic tuner
Old 12/1/09 | 05:59 AM
  #16  
crescent_wrench's Avatar
Mach 1 Member
 
Joined: September 8, 2009
Posts: 787
Likes: 0
From: Wake County, NC
Unique....looks old school.
Old 12/1/09 | 01:13 PM
  #17  
mustangGT90210's Avatar
I will buy Jack Stands!!!
 
Joined: July 13, 2008
Posts: 3,721
Likes: 29
From: Florida
While you're at it you may as well get a CAI with the tuner. You know, for best bang for the buck and all
Old 12/1/09 | 05:11 PM
  #18  
Cooper424's Avatar
Thread Starter
V6 Member
 
Joined: July 9, 2008
Posts: 80
Likes: 0
From: New Jersey
Originally Posted by DarkFireGT
Looks great but PLEASE get rid of the door strips!!!
yeah i've gotta get on that..
Old 12/6/09 | 04:37 PM
  #19  
pitch's Avatar
Member
 
Joined: March 11, 2005
Posts: 11
Likes: 0
Nice looking car. Not my favorite chin spoiler but looks pretty good on the blue.
Old 12/6/09 | 06:51 PM
  #20  
houtex's Avatar
Legacy TMS Member
 
Joined: February 2, 2004
Posts: 7,582
Likes: 670
From: Insane
Originally Posted by DarkFireGT
Looks great but PLEASE get rid of the door strips!!!
Seconded. It really breaks up the look.

Very nicely done, though!


Quick Reply: Finally decided to poist some pics.



All times are GMT -6. The time now is 10:02 PM.