Three weeks ago, I got a Saleen Blower, including the Saleen upgrade pully, injectors and flash of the software installed in my 2006 GT. Today when I fired it up, the engine started but the alarm went off, the stereo was resetted and I got loads of error messages, including "parking break on", "check charging system" "odometer data error", "low fuel level" and "no oil pressure". The engine seems to run just fine but I am especially afraid of the "no oil pressure" message so I havenĀ“t actually driven the car. There is one previous thread regarding a similar problem, but is there anyone out here who can tell me how to solve this problem, or what the problem might be?

 

reload your tune and see what happens.

 

Done that several times, including other tunes as well. This does not help.

 

Check your wires you splice into in the smart box make sure their pluged in all the way ? Check the grounds?

 

Not trying to be a smart ****, but I'd grab that dipstick and check the oil level.

 

I have also checked that the parking break is not on, the break fluid level is sufficient and that there is oil in the engine. I have not checked the fuel level today, but I filled it up last night so I doubt that the fuel has evaporated during the night since it was just about 40 degrees here in DC last night.

The only gauges that are working is the battery charging and the RPM, the rest are dead. I get every error message that the display can give, but funny enought it does not give "driver door open" when it should so.

I will check the wires including the ground, thanks.

 

CallJDM Engineering in Freehold NJ ask for Jim. They are the experts in Saleen Supercharger tuning. I think the website is TeamJDM.com

 

Mine isn't s/c but mine did the same thing on a trip, it ended up being a ground going to the computer, I would have to look it up and see what it was though.

 

+1 call jdm. i am in his shop right now. i hijacked their computer haha. www.teamjdm.com