gt to cobra
9/28/07, 10:15 PM
#41
V6 Member
Join Date: November 8, 2004
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
so then you couldnt really take a mach 1 or 96-01 cobra motor and expect it to hold up and be like the 03 and 04s? and there was no differnence in the heads. i thought the 03 04 had better set of heads?
9/30/07, 09:58 AM
#42
Bullitt Member
the 5spd mach motor is missing the forged rods, so yes, it cant take as much as the 03/04 cobra motor. but i have a buddy with an 03 mach with the cobra blower set up on it. it has 88k and is still runnin. he is puttin down about 450rwhp, and it makes it to the track quite a bit
9/30/07, 10:13 AM
#43
Needs to be more Astony
the machs are close to the sc cobras becasue they are about 200lbs lighter and and put out around 320hp dispite them them being rated at 305hp.
9/30/07, 01:27 PM
#44
Mach 1 Member
Join Date: August 10, 2005
Location: Sarasota
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
There are very few people that have a heavier foot than me, and I pitch the car sideways almost daily. No wheel hop or problems here.BTW, I won't spend a dime as I have warranty unitl 2010/75k miles
.
9/30/07, 01:29 PM
#45
Mach 1 Member
Join Date: August 10, 2005
Location: Sarasota
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
Close in what way? I hope you don't mean power wise. I destroy my buddy with a Mach 1 on daily basis. His car is Prochambered/tune/Catback equipped.
10/1/07, 09:38 AM
#46
Needs to be more Astony
The cobras run around high 12's at mph or 2 under 110.
The Machs are low 13's and 103 or so mph.
Thread
Thread Starter
Forum
Replies
Last Post