V6 upgrades
#46
Tasca Super Boss 429 Member
Join Date: September 28, 2007
Location: Midlothian, Va
Posts: 3,758
Likes: 0
Received 1 Like
on
1 Post
SSM makes an adapter for the M112, and I'm fairly certain that it would also allow you to run a KB or whipple if you so desired.
Last edited by 1999Pony; 2/27/13 at 08:43 AM.
#47
I found a 1992 mustang thunderbird 3.8L complete motor today with a supercharger for 450$, the supercharger looks to be in pretty good condition and works, the engine has a lot of rust but I wouldn't use it anyway. Would it be worth buying?
#48
Tasca Super Boss 429 Member
Join Date: September 28, 2007
Location: Midlothian, Va
Posts: 3,758
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by rodsoccer2
I found a 1992 mustang thunderbird 3.8L complete motor today with a supercharger for 450$, the supercharger looks to be in pretty good condition and works, the engine has a lot of rust but I wouldn't use it anyway. Would it be worth buying?
However from what I remember reading years ago, its not really worth it. It s a small blower and won't produce a lot of boost. But that's not a bad price and won't hurt you either.
#49
Research it a little. I know its not just a bolt and go. I think you need the intake, fuel rails, injectors, maybe some other stuff. Having the whole motor will make it easier.
However from what I remember reading years ago, its not really worth it. It s a small blower and won't produce a lot of boost. But that's not a bad price and won't hurt you either.
#50
Cobra Member
Join Date: September 16, 2012
Location: North Carolina
Posts: 1,164
Likes: 0
Received 0 Likes
on
0 Posts
I'd say at least 300, with supporting mods and decent tune. The super coupe made 255 hp and 315+ torque with a pulley and retune so should be plenty.
Last edited by steven46746; 2/27/13 at 04:25 PM.
#52
Cobra Member
Join Date: September 16, 2012
Location: North Carolina
Posts: 1,164
Likes: 0
Received 0 Likes
on
0 Posts
The Super Coupe's comes equipped with a 3.8 liter V-6 powerplant that is force-fed with an Eaton Corporation supercharger. The 8.2 to 1 compression ratio, combined with six computer controlled sequentially fuel injectors, completes the well rounded underhood package. While running at a maximum 15,600 rpm's, the supercharger provides 12 psi of boost and as a resultant it develops 210 bhp at 4000 engine rpm's. The engine develops 315 lb-ft of torque at 2600 rpm. The supercharged V-6 delivers ample power without much noise but an underdrive kit and a performance chip are available to boost the horsepower rating to 255 bhp.
#54
The Super Coupe's comes equipped with a 3.8 liter V-6 powerplant that is force-fed with an Eaton Corporation supercharger. The 8.2 to 1 compression ratio, combined with six computer controlled sequentially fuel injectors, completes the well rounded underhood package. While running at a maximum 15,600 rpm's, the supercharger provides 12 psi of boost and as a resultant it develops 210 bhp at 4000 engine rpm's. The engine develops 315 lb-ft of torque at 2600 rpm. The supercharged V-6 delivers ample power without much noise but an underdrive kit and a performance chip are available to boost the horsepower rating to 255 bhp.
#55
Cobra Member
Join Date: September 16, 2012
Location: North Carolina
Posts: 1,164
Likes: 0
Received 0 Likes
on
0 Posts
#56
Same! Ill sandblast all of the parts to clean them up and whatever doesn't ill by new. Will I need the upgraded fuel pump, and fuel Injectors as well?
#57
I will personally start with a CAI, TB, Dual Cat Back Exhaust, and a tune for now. $4300 for a procharger not counting the installation and tune sounds expensive for now. As far as the exhaust goes, which brand of of cat back style exhaust should I go with? I was thinking of going with Flowmaster or Magnaflow, I'm leaning towards Flowmaster right now.