How to take an aftermarket stereo out of a 98
#1
V6 Member
Thread Starter
Join Date: September 30, 2012
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
How to take an aftermarket stereo out of a 98
How do you take an aftermarket stereo out of a 98... I got a new deck for christmas because this old one i have now sucks... I just want to know how to get it out... Here are pics of what it looks like
#4
Like Father...
I ♥ Sausage
I ♥ Sausage
You need the two key looking things to slide in on each side of the unit to release it from the metal frame that is around it and slide it out. Try the ones that came with your new head unit.
They should slide in that gap between those to center tabs in this pic...
When it slides into that frame, it snaps in, the two keys will press in on the little tab back there in the side of the head unit. You may have to pull to the outsides a little with them to push those in while pulling straight out at the same time.
They should slide in that gap between those to center tabs in this pic...
When it slides into that frame, it snaps in, the two keys will press in on the little tab back there in the side of the head unit. You may have to pull to the outsides a little with them to push those in while pulling straight out at the same time.
Last edited by Rather B.Blown; 1/11/13 at 05:07 PM.
#7
Like Father...
I ♥ Sausage
I ♥ Sausage
Put your new head unit into the casing that came with it, and use the keys to take it back out. That will give you an idea of what you are trying to do with the old one you're trying to remove.
#10
Mach 1 Member
Join Date: April 18, 2011
Location: Minnesota
Posts: 871
Likes: 0
Received 0 Likes
on
0 Posts
#13
NTTAWWT
#14
V6 Member
Thread Starter
Join Date: September 30, 2012
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
2015 - 2023 MUSTANG
0
9/24/15 08:15 PM