1994-2004 V-6 3.8 and 3.9L V6 Mustangs

Got a K&N Filter Today and Pep Boy heck

Thread Tools
 
Search this Thread
 
Old 12/23/04 | 05:28 AM
  #21  
Ballz's Avatar
Thread Starter
Team Mustang Source
 
Joined: August 18, 2004
Posts: 586
Likes: 0
From: Jacksonville, FL
Its just a simple filter replacement. Unlatch the two hooks (one on top and one under). It will take a bit of patience to figure out how to get the tube bent right so you can get the old filter out. If you got the right one (the E-0940) then it should fit. The K&N part number in the K&N computer at the shop will give you E-0945. This one WILL NOT FIT! Make sure its the E-0940!

Old 12/23/04 | 11:14 AM
  #22  
pilot1129's Avatar
Bullitt Member
 
Joined: January 30, 2004
Posts: 235
Likes: 0
so whats the benefit of the entire kit including the polished metal tube?
Old 12/23/04 | 01:54 PM
  #23  
38special's Avatar
Cobra R Member
 
Joined: March 6, 2004
Posts: 1,517
Likes: 0
I believe that the KN filter gives you about 5 hp and the polished tube gets you another 7 hp.
Old 12/23/04 | 02:06 PM
  #24  
ItsNotABulliT's Avatar
Mach 1 Member
 
Joined: July 13, 2004
Posts: 527
Likes: 0
Yeah the tube lets you move the filter to the fenderwell, letting you intake colder air, as well as the metal tubing doent give way like the plastic, allowing for more constant air flow.
Old 12/24/04 | 02:45 PM
  #25  
38special's Avatar
Cobra R Member
 
Joined: March 6, 2004
Posts: 1,517
Likes: 0
The reason that you want a smooth polished surface is to prevent small air movements that counter the direction of the air going into the engine. These small eddies create enough side or back motion of the air to cost the engine HP.

Its hard to believe that this would make such a difference, but it does.
Old 12/25/04 | 11:21 AM
  #26  
pilot1129's Avatar
Bullitt Member
 
Joined: January 30, 2004
Posts: 235
Likes: 0
ok, i installed just the k&n filter. doesnt sound much different at idleing, but is a bit louder higher up in the rpm band. definately feel it accelerate faster too.

should it sound any different at idle?
Old 12/25/04 | 11:22 AM
  #27  
pilot1129's Avatar
Bullitt Member
 
Joined: January 30, 2004
Posts: 235
Likes: 0
38special, whats a hydrocarbon trap?
Old 12/27/04 | 04:04 AM
  #28  
Ballz's Avatar
Thread Starter
Team Mustang Source
 
Joined: August 18, 2004
Posts: 586
Likes: 0
From: Jacksonville, FL
Mine doesn't sound any different at idle but you can tell the difference in acceleration.
Old 12/27/04 | 04:25 AM
  #29  
PaulF's Avatar
Mach 1 Member
 
Joined: October 28, 2004
Posts: 548
Likes: 0
Now did you guys buy the whole kit, or just the filter replacement?

I think I'm going to drive up to Pep Boys and see if they have the whole kit today...nice little project, I think.
Old 12/27/04 | 12:04 PM
  #30  
38special's Avatar
Cobra R Member
 
Joined: March 6, 2004
Posts: 1,517
Likes: 0
pilot

The hydrocarbon trap on the 05 is btween the air filter and the engine inside of the airflow tubing. All it really does is impede airflow and cause mpg to go down. The purpose is to trap hydrocarbons that escape the car during start up and shutdown.


The KN increases airflow and I plan on getting one for my 02 soon. I will get a C&L Performance AIC for the 05.

edited: Just put a KN filter on the 02. Acceleration is markedly improved. The engine revs lower as well.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FordOfMurfreesboro
General Mustang Chat
6
11/14/15 06:09 PM
MustangConvert11
'10-14 V6 Modifications
2
9/30/15 08:01 PM
PonyMuscletang13
2010-2014 Mustang
4
9/29/15 09:40 AM
southern stang
Repair and Service Help
1
9/26/15 04:19 PM



Quick Reply: Got a K&N Filter Today and Pep Boy heck



All times are GMT -6. The time now is 02:33 AM.