just thought I'd share...
#1
Mach 1 Member
Thread Starter
Join Date: November 20, 2004
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
just thought I'd share...
some pictures of my car roasting the sneakers at the dragstrip the other week, it was all done with one-wheel drive
http://www.tdspeedshotz.com/8-5-06-B...-Sat%20054.htm
http://www.tdspeedshotz.com/8-5-06-B...-Sat%20055.htm
http://www.tdspeedshotz.com/8-5-06-B...-Sat%20056.htm
a traction loc rebuild kit and 3.73s have already been ordered
http://www.tdspeedshotz.com/8-5-06-B...-Sat%20054.htm
http://www.tdspeedshotz.com/8-5-06-B...-Sat%20055.htm
http://www.tdspeedshotz.com/8-5-06-B...-Sat%20056.htm
a traction loc rebuild kit and 3.73s have already been ordered
#4
Mach 1 Member
Thread Starter
Join Date: November 20, 2004
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
I borrowed two rims from a buddy and had old tires that I kept installed on them, so I guess you could say they were my dedicated drag tires, lol. It was my last run anyway, the lugnuts weren't quite torqued enough and came loose during the burnout, but not off. On the return road I heard the wheel thumping and pulled over and tightened them up! No damage was done to the studs or anything... I was very lucky.
which Mach are you referring to, Rich? I only see the orange new edge one and the old blue one
which Mach are you referring to, Rich? I only see the orange new edge one and the old blue one
#8
Mach 1 Member
Thread Starter
Join Date: November 20, 2004
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
I think the clutch pack was worn out well before I even went to the track. Some of the local slack-jawed yokels are talking about going down again labor day weekend and again on the 9th for test and tune, FYI.
Thread
Thread Starter
Forum
Replies
Last Post