Fox mustangs
#6
Bullitt Member
#8
Cobra R Member
Join Date: December 11, 2011
Location: Mass
Posts: 1,839
Likes: 0
Received 0 Likes
on
0 Posts
My story and the project:
https://themustangsource.com/f634/my...y-pics-503464/
When I 1st got it home..
Some pics after the rest...
https://themustangsource.com/f634/my...y-pics-503464/
When I 1st got it home..
Some pics after the rest...
#9
I'll post pictures of my last 2 5.0's but I no longer own them unfortunately. Still a Foxbody guy for life though! I'll have another one someday, probably once the Boss is paid for.
89'-- Bought it with 29k original miles. Did a 5 Speed swap, 3.73's, AFR 165's, Edlebrock Performer intake, full long tube exhaust ect. Never had it on the dyno but a slightly different setup on my buddies 95 make 300/330. Spinning through 3rd It ran a 13.1 at 108... Guy I sold it to let his tent garage get overloaded with snow and it collapsed crushing the roof in... Regret selling this one the most.
88'-- Another mint fox with low miles, 48k. Bought from a middle aged lady who purchased it new. Already was a 5 speed car, I did 4.10's, full shorty exhaust, ported E7's, TMoss stock upper/lower, Cobra Rockers, and Mickeys. Otherwise all stock, it put 256hp 300tq on the Dyno at Dez Racing and ran a 12.9 @ 105.
No pics of my 90 unfortunately and if I started posting pictures of all my dads/uncles/grandpas/grandmas 5 liters I'd be here all day lol.
Bill
89'-- Bought it with 29k original miles. Did a 5 Speed swap, 3.73's, AFR 165's, Edlebrock Performer intake, full long tube exhaust ect. Never had it on the dyno but a slightly different setup on my buddies 95 make 300/330. Spinning through 3rd It ran a 13.1 at 108... Guy I sold it to let his tent garage get overloaded with snow and it collapsed crushing the roof in... Regret selling this one the most.
88'-- Another mint fox with low miles, 48k. Bought from a middle aged lady who purchased it new. Already was a 5 speed car, I did 4.10's, full shorty exhaust, ported E7's, TMoss stock upper/lower, Cobra Rockers, and Mickeys. Otherwise all stock, it put 256hp 300tq on the Dyno at Dez Racing and ran a 12.9 @ 105.
No pics of my 90 unfortunately and if I started posting pictures of all my dads/uncles/grandpas/grandmas 5 liters I'd be here all day lol.
Bill
#10
Skunk21 I love your car! A guy in my town has a white fox similar to yours and I fell in love with it years ago. I'm not sure what year it is, it has cobra badging and a Saleen license plate cover lol.
#11
#13
Join Date: December 5, 2006
Location: Trapped in Minnesota
Posts: 31,620
Likes: 0
Received 70 Likes
on
66 Posts
Just for the heck of it. I bought from my uncle when I was 15 and had it painted sonic blue w/ white stripes. Now it's sitting in the garage waiting for me to finish school so I can drop in a 5.0.
#14
Originally Posted by Blue Notch
Just for the heck of it. I bought from my uncle when I was 15 and had it painted sonic blue w/ white stripes. Now it's sitting in the garage waiting for me to finish school so I can drop in a 5.0.
#15
Bullitt Member
Join Date: February 5, 2012
Location: valparaiso IN
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
ok i guess i can tell a story of my adventure. this is my 500$ beater 8000$ later.i have lots of pics of the build.ill list the stuff i have done.im sure i will be missing a bunch since i have nearly touched every nut and bolt on the whole car.
interior:
painted dash, gauge pod,short throw shifter, new buckets, custom rear seats,new carpet, new door panels, painted and recarpeted rear arm rest panels(interior quarters), grant steering wheel.
exterior:
lots of body work, new paint, new badges, polish rims, new center caps, new tail lights, new head lights, new top, new top cover, paint underneath of car, new door handles, new tires
under the hood:
the bottom end was pretty fresh when purchased with a b303 cam. everything else here i did.
trickflow 170 heads, weiand stealth intake,scorpion 1.72 rr, holley 670 street avenger aluminum carb, holley air cleaner, holley adjustable fuel pressure reg, noisy gear drive, full msd setup, fabricated aluminum valve covers, new duralast battery, 150 amp alternator, bigger aluminum radiator, electric fan, frpp ac delete, smog delete, mac underdrive pulleys, new water pump,new power steering pump.
drive train:
i used a boneyard t5, king cobra clutch, adjustable clutch cable,triple quadrant, firewall adjuster, 3.73 gears, changed brake pads all the way around. fabbing a drive shaft loop as we speak.
suspension:
new kyb shocks and struts all the way around, umi lift bar rear lower control arm, custom fabbed torque box reinforcments, custom fabbed subframe connectors, custom fabbed subframe to core support x bracing, new sway bar end links.
sorry if i got out of hand.lol
interior:
painted dash, gauge pod,short throw shifter, new buckets, custom rear seats,new carpet, new door panels, painted and recarpeted rear arm rest panels(interior quarters), grant steering wheel.
exterior:
lots of body work, new paint, new badges, polish rims, new center caps, new tail lights, new head lights, new top, new top cover, paint underneath of car, new door handles, new tires
under the hood:
the bottom end was pretty fresh when purchased with a b303 cam. everything else here i did.
trickflow 170 heads, weiand stealth intake,scorpion 1.72 rr, holley 670 street avenger aluminum carb, holley air cleaner, holley adjustable fuel pressure reg, noisy gear drive, full msd setup, fabricated aluminum valve covers, new duralast battery, 150 amp alternator, bigger aluminum radiator, electric fan, frpp ac delete, smog delete, mac underdrive pulleys, new water pump,new power steering pump.
drive train:
i used a boneyard t5, king cobra clutch, adjustable clutch cable,triple quadrant, firewall adjuster, 3.73 gears, changed brake pads all the way around. fabbing a drive shaft loop as we speak.
suspension:
new kyb shocks and struts all the way around, umi lift bar rear lower control arm, custom fabbed torque box reinforcments, custom fabbed subframe connectors, custom fabbed subframe to core support x bracing, new sway bar end links.
sorry if i got out of hand.lol
Last edited by onebadvert; 4/18/12 at 09:04 PM.
#16
Bullitt Member
Join Date: February 5, 2012
Location: valparaiso IN
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by skunk21
My story and the project:
https://themustangsource.com/f634/my...y-pics-503464/
When I 1st got it home..
Some pics after the rest...
https://themustangsource.com/f634/my...y-pics-503464/
When I 1st got it home..
Some pics after the rest...
Last edited by onebadvert; 4/18/12 at 09:32 PM.
#17
Seeing all these Foxbodies as well as going through some of my old pictures has me itching to get another one!
Nice Stangs guys!
@Skunk21-- I love that you decided to go the stock appearance route, makes it look so **** clean like it came out of a time capsule lol. I see that you have a build going on at Dez! No better guy to have working on your
Fox, that's for sure.
Bill
Nice Stangs guys!
@Skunk21-- I love that you decided to go the stock appearance route, makes it look so **** clean like it came out of a time capsule lol. I see that you have a build going on at Dez! No better guy to have working on your
Fox, that's for sure.
Bill
#19
Cobra R Member
Join Date: December 11, 2011
Location: Mass
Posts: 1,839
Likes: 0
Received 0 Likes
on
0 Posts
dylan.85gt thanks a lot!
Blue Notch I agree with Gary a very nice looking notch, well done
onebadvert thanks. Yeah the goal was to do it with Factory NOS parts if possible. Costly but the fit was so much better and keeping it close to how it came from Ford was the target.
MustangBillJr also thanks for the comments. Yeah Mike and guys are really good to us mustang guys. I have been talking with them about my build. I'm also thinking has an option looking for a set of stock ponys or even a set of Pony Rs to give it the total stock look from '91 and making it a total sleeper.This was the main reason for staying away from aftermarket cowl hoods, etc. I wanted to make it look like a brand new fresh '91. I got a really great deal on my Ford racing cobra r wheels I have now, brand new in the box so I went for it ( Ford has discontinued them) so either way I'm happy.
Blue Notch I agree with Gary a very nice looking notch, well done
onebadvert thanks. Yeah the goal was to do it with Factory NOS parts if possible. Costly but the fit was so much better and keeping it close to how it came from Ford was the target.
MustangBillJr also thanks for the comments. Yeah Mike and guys are really good to us mustang guys. I have been talking with them about my build. I'm also thinking has an option looking for a set of stock ponys or even a set of Pony Rs to give it the total stock look from '91 and making it a total sleeper.This was the main reason for staying away from aftermarket cowl hoods, etc. I wanted to make it look like a brand new fresh '91. I got a really great deal on my Ford racing cobra r wheels I have now, brand new in the box so I went for it ( Ford has discontinued them) so either way I'm happy.
#20
BoogieNights Studios:
Official Fluffer
Official Fluffer
Join Date: September 13, 2009
Location: Clarksville, TN
Posts: 5,520
Likes: 0
Received 5 Likes
on
5 Posts
Well here a thread that I started for mine. Take a looksey there are pics on there.
https://themustangsource.com/f634/boogienights-494279/
https://themustangsource.com/f634/boogienights-494279/