My 05 GT Build LOTS OF PICS & PARTS!
2/7/10, 03:42 PM
#1
Bullitt Member
Thread Starter
Join Date: February 7, 2010
Location: Ottawa, Ontario, Canada
Posts: 242
Likes: 0
Received 1 Like
on
1 Post
My 05 GT Build LOTS OF PICS & PARTS!
Here it is at the dealership before I bought it.
First thing I did was have the windows tinted. I went with 13% SolarGard all around. It's hard to see in this picture cause it was raining.
Installed Tokico HP struts and shocks as well as Eibach Prokit Springs. This lowers it 1.5". I also tinted the front and rear side markers.
Tokico HP Shocks and Struts.
Eiback Prokit
And here they are installed
Installed MBRP mufflers today. Also installing new headers and X-pipe with high flow cats.
MBRP Axlebacks
Here they are installed.
I Was having an issue with "wheel hop" so I ordered J&M lower control arms which solved it.
J&M Lower control arms.
Here they are installed.
Now some people think I am crazy but I hate leather seats. So I ordered new OEM cloth covers and swapped them.
Here is the original grey leather seats.
And here is they new black cloth ones. They are still a little wrinkled from packaging.
I wanted to change the carpet to match the black seats. I was worried how the black would look but I think it turned out nice since there is quite a bit of black in the interior to begin with.
Interior ripped out and ready for new carpet.
New carpet installed.
Interior reinstalled.
First thing I did was have the windows tinted. I went with 13% SolarGard all around. It's hard to see in this picture cause it was raining.
Installed Tokico HP struts and shocks as well as Eibach Prokit Springs. This lowers it 1.5". I also tinted the front and rear side markers.
Tokico HP Shocks and Struts.
Installed MBRP mufflers today. Also installing new headers and X-pipe with high flow cats.
MBRP Axlebacks
I Was having an issue with "wheel hop" so I ordered J&M lower control arms which solved it.
J&M Lower control arms.
Now some people think I am crazy but I hate leather seats. So I ordered new OEM cloth covers and swapped them.
Here is the original grey leather seats.
Interior ripped out and ready for new carpet.
2/7/10, 03:44 PM
#4
Bullitt Member
Thread Starter
Join Date: February 7, 2010
Location: Ottawa, Ontario, Canada
Posts: 242
Likes: 0
Received 1 Like
on
1 Post
Today I installed a relay which disables the traction control system when you start the car. It's still fully functional but just defaults to off now.
2/7/10, 03:47 PM
#11
Bullitt Member
Thread Starter
Join Date: February 7, 2010
Location: Ottawa, Ontario, Canada
Posts: 242
Likes: 0
Received 1 Like
on
1 Post
Installed them today in just under 4 hours. Not the best video. They sound much better in person.
http://www.youtube.com/watch?v=tXVXvkGZF5o
http://www.youtube.com/watch?v=tXVXvkGZF5o
2/7/10, 05:05 PM
#14
Bullitt Member
Thread Starter
Join Date: February 7, 2010
Location: Ottawa, Ontario, Canada
Posts: 242
Likes: 0
Received 1 Like
on
1 Post
I still have the C&L Intake, Magnaflow X-pipe and BBK 62mm throttle body to go performance wise. Also changing the rims to black saleens, replacing the spoiler with a Roush 3 piece and installing a CDC lip. I am sure I will come up with more to.
Not sure how it performs yet as it's away for winter awaiting a dyno tune.
Not sure how it performs yet as it's away for winter awaiting a dyno tune.
2/8/10, 05:49 AM
#20
Bullitt Member
Thread Starter
Join Date: February 7, 2010
Location: Ottawa, Ontario, Canada
Posts: 242
Likes: 0
Received 1 Like
on
1 Post
Here is a video of the sound with the cams. Not the greatest video but you get the point.
http://www.youtube.com/watch?v=tXVXvkGZF5o
http://www.youtube.com/watch?v=tXVXvkGZF5o