retrofit 13/14 taillights to 10-12 with gap: fixed
#21
Legacy TMS Member
Thread Starter
OK, lights and the trim arrived. I also got the glossy trim piece to go with it.
I think I quite like it. It really does change the look of the back, though. Gives the rear a more aggressive look.
Only took me 20 min. The trim is held onto the bottom of the lights by 3m tape.
The lights were scratched up, but I used 3000 grit sand paper to sand them out and then polished them. Scratches are gone.
I think I quite like it. It really does change the look of the back, though. Gives the rear a more aggressive look.
Only took me 20 min. The trim is held onto the bottom of the lights by 3m tape.
The lights were scratched up, but I used 3000 grit sand paper to sand them out and then polished them. Scratches are gone.
Last edited by jim010; 11/7/14 at 03:03 PM.
#25
Mach 1 Member
#27
Mach 1 Member
#28
Mach 1 Member
I have to admit, they look pretty good painted:
http://www.svtperformance.com/forums/showthread.php?1043621-Raxiom-13-14-tail-light-bumper-gap-fillers
LEXiiON
http://www.svtperformance.com/forums/showthread.php?1043621-Raxiom-13-14-tail-light-bumper-gap-fillers
LEXiiON
Last edited by LEXiiON; 11/8/14 at 07:13 PM.
#32
Mach 1 Member
#33
Legacy TMS Member
Thread Starter
That is not bad. It blends better than I thought. I don't mind leaving it in gloss black either, though.
Lots of lights on ebay right now for good prices, by the way.
Lots of lights on ebay right now for good prices, by the way.
#36
Mach 1 Member
#37
Legacy TMS Member
Thread Starter
I'm in the mountains right now with the family using her SUV. When I get back on monday, I'll snap close ups for you. They look SOOO much better after sanding and polishing.
#39
Legacy TMS Member
Thread Starter
Yeah right. You probably bought them already and they are being shipped to you as i type this.
Last edited by jim010; 11/9/14 at 09:01 AM.