The Mustang Source - Ford Mustang Forums

5.0L GT Modifications Placeholder for future motor based GT's modifications.
Sponsored by:
Sponsored by:

Evolution Performance, Inc. - 2011 Mustang GT 5.0L 4V Exhaust Tech Info!

   
Old Apr 29, 2010 | 08:52 PM
Share
  #21  
Evolution Performance's Avatar
Evolution Performance
Thread Starter
Former Vendor
 
Joined: May 29, 2005
Posts: 196
Likes: 0
Originally Posted by MontrealStang
Can you post some pictures of that connection. I would really want to reuse my Corsa axle back exhaust on my 2011 since they cost a fortune !
I will take some photos tomorrow morning!
Reply
0
Old Apr 29, 2010 | 08:55 PM
Share
  #22  
todd03blown's Avatar
todd03blown
Cobra Member
 
Joined: November 30, 2009
Posts: 1,121
Likes: 0
From: South
Originally Posted by Skotty
But what does KR stand for?
In February 1968, the GT500KR "King of the Road" debuted; under the hood was a 428 cubic-inch Cobra Jet V8 which was conservatively rated at 335 horsepower
Reply
0
Old Apr 29, 2010 | 08:59 PM
Share
  #23  
Evolution Performance's Avatar
Evolution Performance
Thread Starter
Former Vendor
 
Joined: May 29, 2005
Posts: 196
Likes: 0
Originally Posted by todd03blown
Do you all expect decent gains with a new X/H and Catback setup? Sounds like it should help a good amount?
After we're done with the car on the dyno tomorrow......

We will add an Off-Road X-Pipe and a Catback Exhaust System to the car and dyno it again and see what it gains!

Fred
Evolution Performance, Inc.
www.evoperform.com
Reply
0
Old Apr 29, 2010 | 09:00 PM
Share
  #24  
todd03blown's Avatar
todd03blown
Cobra Member
 
Joined: November 30, 2009
Posts: 1,121
Likes: 0
From: South
Originally Posted by Evolution Performance
After we're done with the car on the dyno tomorrow......

We will add an Off-Road X-Pipe and a Catback Exhaust System to the car and dyno it again and see what it gains!

Fred
Evolution Performance, Inc.
www.evoperform.com
Nice, way to stay busy with this new toy
Reply
0
Old Apr 29, 2010 | 09:31 PM
Share
  #25  
jjS89LX's Avatar
jjS89LX
V6 Member
 
Joined: April 21, 2010
Posts: 64
Likes: 0
Originally Posted by Evolution Performance
After we're done with the car on the dyno tomorrow......

We will add an Off-Road X-Pipe and a Catback Exhaust System to the car and dyno it again and see what it gains!

Fred
Evolution Performance, Inc.
www.evoperform.com
Will you make a video please? I'd like to hear it... Thank you
Reply
0
Old Apr 29, 2010 | 09:32 PM
Share
  #26  
Overboost's Avatar
Overboost
GTR Member
 
Joined: September 28, 2009
Posts: 6,284
Likes: 1
That's what I want to hear. Glad to see we've got people who barely got their hands dirty making parts for the 5.0. This car is going to scream with some minor work.
Reply
0
Old Apr 29, 2010 | 09:33 PM
Share
  #27  
Evolution Performance's Avatar
Evolution Performance
Thread Starter
Former Vendor
 
Joined: May 29, 2005
Posts: 196
Likes: 0
I always make videos, 1080P HD!
Reply
0
Old Apr 29, 2010 | 09:36 PM
Share
  #28  
jjS89LX's Avatar
jjS89LX
V6 Member
 
Joined: April 21, 2010
Posts: 64
Likes: 0
Thanks.
Reply
0
Old Apr 29, 2010 | 10:25 PM
Share
  #29  
tbi0904's Avatar
tbi0904
GT Member
 
Joined: January 10, 2010
Posts: 146
Likes: 0
From: huntley, il
Can't wait to see what you guys can accomplish. The "Coyote is tapped out" stuff is still out there in interwebzland, hope you can disprove it. Also looking forward to Lethal Performance's Whipple equipped 5.0! Just one request, no more Breaking Benjamin in your vids...please?
Reply
0
Old Apr 30, 2010 | 06:45 AM
Share
  #30  
Mus408's Avatar
Mus408
GT Member
 
Joined: January 31, 2010
Posts: 135
Likes: 0
Kind of hard to figure out things that Ford does to factory exhaust systems. This is a larger cube engine, than the 2005-1010 engine,and with more torque tuning abilities with the variable quad cam timing,yet they used full 2.5 inch exhaust on the earlier models but squeeze it down to 2 1/4 inch on the 2011?
Earlier reports had indicated a 2.750 exhaust pipe diameter.
Maybe they wanted to reel in the top end power,on the base GT,for some little HP upgrades,down the road,for a later Special Edition? I was thinking for once,there would be a factory exhaust that would need no changing for HP,other than a different sound.
Reply
0
Old Apr 30, 2010 | 10:15 AM
Share
  #31  
Evolution Performance's Avatar
Evolution Performance
Thread Starter
Former Vendor
 
Joined: May 29, 2005
Posts: 196
Likes: 0
I don't know how many of you are on Facebook, but I suggest being a fan of our Page. I will be updating it with all 2011 Mustang GT 5.0L 4V related stuff along with Photos and Videos! It really is the best place to check for our on going updates!

http://www.facebook.com/pages/Evolution-Performance-Inc/262882950647
Reply
0
Old Apr 30, 2010 | 10:38 AM
Share
  #32  
jeff s's Avatar
jeff s
Bullitt Member
 
Joined: February 4, 2010
Posts: 226
Likes: 0
From: UAE
Originally Posted by Mus408
Kind of hard to figure out things that Ford does to factory exhaust systems. This is a larger cube engine, than the 2005-1010 engine,and with more torque tuning abilities with the variable quad cam timing,yet they used full 2.5 inch exhaust on the earlier models but squeeze it down to 2 1/4 inch on the 2011?
Earlier reports had indicated a 2.750 exhaust pipe diameter.
If that is true, it is very interesting...
Reply
0
Old Apr 30, 2010 | 10:52 AM
Share
  #33  
stangfoeva's Avatar
stangfoeva
MOTM Committee Member
 
Joined: April 17, 2006
Posts: 9,201
Likes: 2
From: SoCal
Originally Posted by Evolution Performance
I don't know how many of you are on Facebook, but I suggest being a fan of our Page. I will be updating it with all 2011 Mustang GT 5.0L 4V related stuff along with Photos and Videos! It really is the best place to check for our on going updates!

http://www.facebook.com/pages/Evolution-Performance-Inc/262882950647
joining now
Reply
0
Old Apr 30, 2010 | 10:57 AM
Share
  #34  
hawkeye18's Avatar
hawkeye18
Mach 1 Member
 
Joined: April 20, 2010
Posts: 733
Likes: 1
From: Norfolk, VA
Originally Posted by Evolution Performance
I don't know how many of you are on Facebook, but I suggest being a fan of our Page. I will be updating it with all 2011 Mustang GT 5.0L 4V related stuff along with Photos and Videos! It really is the best place to check for our on going updates!

http://www.facebook.com/pages/Evolution-Performance-Inc/262882950647
Done. Can't wait..
Reply
0
Old Apr 30, 2010 | 11:07 AM
Share
  #35  
Topnotch's Avatar
Topnotch
Team Mustang Source
 
Joined: January 31, 2004
Posts: 3,045
Likes: 2
From: NYC



http://blogs.mustang50magazine.com/6...yno/index.html
Reply
0
Old Apr 30, 2010 | 02:35 PM
Share
  #36  
bpmurr's Avatar
bpmurr
Team Mustang Source
 
Joined: October 13, 2004
Posts: 2,842
Likes: 0
From: MD
Originally Posted by Topnotch
Love the color!
Reply
0
Old Apr 30, 2010 | 02:36 PM
Share
  #37  
eci's Avatar
eci
Banned
 
Joined: August 16, 2006
Posts: 1,633
Likes: 0
Originally Posted by bpmurr
Love the color!
Kona sucks. Would never buy.
Reply
0
Old Apr 30, 2010 | 02:37 PM
Share
  #38  
eci's Avatar
eci
Banned
 
Joined: August 16, 2006
Posts: 1,633
Likes: 0
Originally Posted by Mus408
Earlier reports had indicated a 2.750 exhaust pipe diameter.
Where? I only saw this for the 11' GT500.
Reply
0
Old Apr 30, 2010 | 02:41 PM
Share
  #39  
todd03blown's Avatar
todd03blown
Cobra Member
 
Joined: November 30, 2009
Posts: 1,121
Likes: 0
From: South
Just saw Fred update on facebook they are heading to the track again with their '11 GT!!
Reply
0
Old Apr 30, 2010 | 02:45 PM
Share
  #40  
Sax1031's Avatar
Sax1031
V6 Member
 
Joined: April 28, 2010
Posts: 94
Likes: 0
I wish we could get the numbers after the tuning and what not they did.
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -6. The time now is 12:18 AM.