Corsa Extreme axle-back installed
Just finished up with the X-pipe install. Exhaust sounds much less raspy and almost quieter in high rpms. I like the sound better with the new pipe in place compared to just the axle-backs. Gives the car a more refined sound IMO.
Here's a sound clip of my car. It was made on a spur of the moment when my friend and I wanted to hear what each of our car's exhaust sounded like. Unfortunately neither of our phones had video recording capability.
I will be making one soon though now that I got a better phone. 
Corsa Exhaust Sound Clip
EDIT: Sorry for the long pause between WOT and drive by. The road was long and had a median divider so it took forever to turn around.
I will be making one soon though now that I got a better phone. 
Corsa Exhaust Sound Clip
EDIT: Sorry for the long pause between WOT and drive by. The road was long and had a median divider so it took forever to turn around.
Last edited by WildPony619; Oct 21, 2010 at 06:42 PM.
I was finally able to do some quick video clips of my exhaust system.
Start-up
Rev and Take off
Drive By
Inside (Windows Down)
Enjoy!
Start-up
Rev and Take off
Drive By
Inside (Windows Down)
Enjoy!
I'm still getting a little bit of squeaking from the exhaust, which I'm going to address tomorrow. I need to put it up on stands and look at that, which I know what to do, just haven't got around to doing it yet. Also looks like since the x-pipe install, the tips need to be re-centered.
I'm still getting a little bit of squeaking from the exhaust, which I'm going to address tomorrow. I need to put it up on stands and look at that, which I know what to do, just haven't got around to doing it yet. Also looks like since the x-pipe install, the tips need to be re-centered.
Finally got around to adjusting the exhaust following the X-pipe install. I still had some squeaking, but was able to eliminate that by centering the axle-back portions and pushing everything forward a bit.
One thing I did notice though, the joint on the driver's side portion of the X-pipe appears to have a small leak in it. This is simply there for packaging, and I'm considering having that welded to eliminate any potential leaks in the future.
One thing I did notice though, the joint on the driver's side portion of the X-pipe appears to have a small leak in it. This is simply there for packaging, and I'm considering having that welded to eliminate any potential leaks in the future.
vids?
Here's a quick vid:
http://www.youtube.com/watch?v=R59bh...layer_embedded
No idea why it won't post correctly and embed.
http://www.youtube.com/watch?v=R59bh...layer_embedded
No idea why it won't post correctly and embed.
Here's a quick vid:
http://www.youtube.com/watch?v=R59bh...layer_embedded
No idea why it won't post correctly and embed.
http://www.youtube.com/watch?v=R59bh...layer_embedded
No idea why it won't post correctly and embed.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
2015 - 2023 MUSTANG
0
Sep 10, 2015 12:44 PM
M3hunter
Suspension, Brakes, and Tire Tech
5
Sep 10, 2015 09:26 AM
tj@steeda
2015 - 2023 MUSTANG
0
Sep 8, 2015 10:45 AM





