Stripes added this weekend
#1
Member
Thread Starter
Join Date: September 22, 2011
Location: new jersey
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
#2
Attachment 112848
Attachment 112849
Attachment 112851
Attachment 112852
Attachment 112853
Attachment 112854
Attachment 112855
Looks simple, but I spent months comming up with what ur seeing. I wanted tb be careful and not take away too much of the paint.
Hope u all like it.
Attachment 112849
Attachment 112851
Attachment 112852
Attachment 112853
Attachment 112854
Attachment 112855
Looks simple, but I spent months comming up with what ur seeing. I wanted tb be careful and not take away too much of the paint.
Hope u all like it.
#9
Mach 1 Member
Join Date: August 14, 2010
Location: Texas
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
Yes!
you are the first boss stripe user I have seen that had the stripe centered on the 5.0 emblem.
The others I have seen look lame because the 5.0 emblem is straddling the border of the stripe.
you are the first boss stripe user I have seen that had the stripe centered on the 5.0 emblem.
The others I have seen look lame because the 5.0 emblem is straddling the border of the stripe.
#12
Member
Thread Starter
Join Date: September 22, 2011
Location: new jersey
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Not hard, use a hair dryer, or heat gun on the logo to soften the glue a bit. Use a piece of fishing line or dental floss, and work ur way around the logo. The "0" will have 2 prongs on it, one on the top, and one on the bottom. Just work slowly using a heat as necessary, and it will be off in no time. Clean the old adhesive off, and ur ready to go!
#13
Shelby GT500 Member
Not hard, use a hair dryer, or heat gun on the logo to soften the glue a bit. Use a piece of fishing line or dental floss, and work ur way around the logo. The "0" will have 2 prongs on it, one on the top, and one on the bottom. Just work slowly using a heat as necessary, and it will be off in no time. Clean the old adhesive off, and ur ready to go!
I agree with another poster that Black 5.0 emblems would be perfect on the car.... unless the shades of black don't match
#15
Shelby GT500 Member
Still looks good though!!
#20
Mach 1 Member
Join Date: September 8, 2009
Location: Brandon Florida
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
I like it because, like others said, it is different.
Not digging the GT badging in there but it fits because from the 302 down it is like a progression. I also would've wrapped the stripes down under the edges of the hood and fender. Reason I bring it up is because when you look at it in some pics it appears like there is purposed gap there.
Again, I really like the look. Nice job!
Not digging the GT badging in there but it fits because from the 302 down it is like a progression. I also would've wrapped the stripes down under the edges of the hood and fender. Reason I bring it up is because when you look at it in some pics it appears like there is purposed gap there.
Again, I really like the look. Nice job!