~ 5.0L GT in my Driveway!!!
#23
Mach 1 Member
Join Date: August 10, 2005
Location: Sarasota
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
FMCC was offering 0% or $1500 rebate, so I took the 0%. I had the $750 coupon, and also a $1250 Renewal Rebate for coming out of my Edge Lease. These combo'd with over $2500 equity in my Edge (used car market is just stupid right now), and X Plan made is possible for me to get the car.
#25
Mach 1 Member
Thread Starter
Join Date: September 20, 2011
Location: KY/OH/MO
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
First Mods:
Tinted Tailights ($10 mod) Matches the stock tinted Third brake light perfect!!!
What it USED to look like:
AND NOW
Didn't want them "black" just tinted a bit, so I used one good thick coat then rubbed the hell outta them with 3M rubbing compound to shine them up and give them a gloss look.
Tinted Tailights ($10 mod) Matches the stock tinted Third brake light perfect!!!
What it USED to look like:
AND NOW
Didn't want them "black" just tinted a bit, so I used one good thick coat then rubbed the hell outta them with 3M rubbing compound to shine them up and give them a gloss look.
#27
Shelby GT350 Member
Check out the GT500 mufflers- much louder than stock but quiet enough to not be obnoxious.
Congrats on a great deal on a gorgeous car. :toast:
#28
Mach 1 Member
Thread Starter
Join Date: September 20, 2011
Location: KY/OH/MO
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
Shortly after I posted the above pics the Postman showed up with my Decklid Blackout panel.....
Got it from: http://www.mustangblackout.com/mustang.html
GREAT Piece, 2min install and fits perfect!
Got it from: http://www.mustangblackout.com/mustang.html
GREAT Piece, 2min install and fits perfect!
Last edited by Nocturnal'14; 10/3/11 at 08:23 AM.
#29
Mach 1 Member
Join Date: April 8, 2011
Location: An hour from Laguna Seca
Posts: 621
Likes: 0
Received 0 Likes
on
0 Posts
Looks great. The 6-Speed with the 3.73's are a lot of fun huh? My only advice is to go very easy on shifting until some good wear patterns are established in the trans. At 6500 miles I still go to 3500 in 1st then eeeeasy shift into 3rd on my way to work to get the thing all warmed up. But I don't have to go below 4th for the first 30 miles. Then the rest of the day the shifts are smooooth. No need to chew up 2nd when the trans is cold.
#34
Bullitt Member
Join Date: May 21, 2011
Location: Austin, TX
Posts: 505
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Uin2it
Shortly after I posted the above pics the Postman showed up with my Decklid Blackout panel.....
Got it from: http://www.mustangblackout.com/mustang.html
GREAT Piece, 2min install and fits perfect!
Got it from: http://www.mustangblackout.com/mustang.html
GREAT Piece, 2min install and fits perfect!
#40
Mach 1 Member
Thread Starter
Join Date: September 20, 2011
Location: KY/OH/MO
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
FRPP Drop Springs went in......"M5300P" Springs.
VERY EASY Install! its a subtle drop which is what I wanted....but I can definitely tell the difference. Still gonna take a bit for the springs to settle.
Measurements:
BEFORE ....... AFTER
DF: 29.25............28.75" PF: 29.25...........29.00"
DR: 29.75..............29.15 PR: 29.85.............29.00"
I think that is all I will be doing for now..... till I get to NC in December.
VERY EASY Install! its a subtle drop which is what I wanted....but I can definitely tell the difference. Still gonna take a bit for the springs to settle.
Measurements:
BEFORE ....... AFTER
DF: 29.25............28.75" PF: 29.25...........29.00"
DR: 29.75..............29.15 PR: 29.85.............29.00"
I think that is all I will be doing for now..... till I get to NC in December.