Well we are finished. Going to hook battery up and test it.

 

Clutch is fun now. It really springs back on you. So you can't let the clutch out slowly.

 

Well I made sure to take pictures during the process. Took 40 in all. They are mixed up.

http://s193.photobucket.com/albums/z...sassin/Clutch/


$35 for flywheel resurfacing.
$60 for clutch disc
$46 for pressure plate
not sure about throwout bearing.

Overall not bad for clutch replacement. Most places wanted anywhere from 220-400 for the clutch kit.

 

good job, i am goad you found the right clutch , because i had no luck, the earliest 6 cyl mustang the books had were 69 and i dont know if they were the same

like kenny g said write it somewhere

 

I took pics of the part #s. Napa has correct clutch disc, autozone has correct pressure plate and throwout bearing. Only had to adjust the rod that comes off the z-bar and goes to the clutch fork.

 

Thats great that your all finished, thats a fairly big project. How stiff is it now?

 

Little bit stiffer than the last. It really kicks back though.

 

Sounds better than mine. i dont know what its problem is, but it wont spring back all the way anymore