GT/CS Front Splitter
12/23/11, 02:00 PM
#65
Member
Join Date: July 26, 2011
Location: East Texas
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by michschi
I know this thread is retarded old, but I still don't see my CS, Shelby GT rocking the GT500 splitter and I am not sure why.
Modifications to GT500 splitter to fit.
Modifications to GT500 splitter to fit.
11/13/12, 01:58 PM
#67
Cobra Member
Join Date: April 20, 2005
Location: Orlando, FL
Posts: 1,477
Likes: 0
Received 0 Likes
on
0 Posts
Heads up if anyone is looking for the GT500 splitter, tascaparts dot com has them for $130 shipped. Cheapest I found around (everything on ebay is north of $200).
I got mine on the way, hopefully it will be installed soon
I got mine on the way, hopefully it will be installed soon
11/17/12, 04:19 PM
#68
Team Mustang Source
Thanks for the info, thats a good price i'm considering it.
2/1/13, 11:12 AM
#70
Cobra Member
Join Date: April 20, 2005
Location: Orlando, FL
Posts: 1,477
Likes: 0
Received 0 Likes
on
0 Posts
Took a few weeks for them to inform me that the shipping was going to be over $100 instead of the $13 they initially quoted! Scratch that, it is not a good deal...
2/7/13, 08:19 PM
#72
GT Member
Join Date: January 25, 2013
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Ok. Here's the scoop. I don't know about you guys that already have one, but I found a brand new 2009 GT500 splitter at my local dealership for $185. I snagged it. Turns out, it doesn't fit for crap. only FOUR of the 15 holes or so line up. I had to drill new holes and use bolts/nuts to secure the splitter. None of the holes on the inner fender well line up either. Had to use new screws there as well.
If you remove the original piece that the splitter sits under, you don't have to mod the splitter at all! It goes right up in place and it replaces the function of the old piece. Except for pretty much none of the holes lining up, it fits well. Regardless, I have it installed and secured. Here are some pics. Opinions....?
If you remove the original piece that the splitter sits under, you don't have to mod the splitter at all! It goes right up in place and it replaces the function of the old piece. Except for pretty much none of the holes lining up, it fits well. Regardless, I have it installed and secured. Here are some pics. Opinions....?
2/7/13, 10:53 PM
#78
GT Member
Join Date: January 25, 2013
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Looks great but I couldn't get mine to come out as far as yours. The forward edge of mine is just about flush with the forward part of the bumper. The only holes that lined up were the two on either side of the center line for the plastic fasteners and the 7/32" bolts for the lower engine shroud. This is the best I could get it. I might tinker with it some more tomorrow.
Last edited by GT/CS Guy; 2/7/13 at 10:56 PM.
2/7/13, 11:14 PM
#79
Bullitt Member
Join Date: April 25, 2010
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Looks great but I couldn't get mine to come out as far as yours. The forward edge of mine is just about flush with the forward part of the bumper. The only holes that lined up were the two on either side of the center line for the plastic fasteners and the 7/32" bolts for the lower engine shroud. This is the best I could get it. I might tinker with it some more tomorrow.
2/7/13, 11:28 PM
#80
Bullitt Member
Join Date: April 25, 2010
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
-The red marks is where I drilled my new holes
-The shaded grey area is where I made an extension so the new splitter bolted to the splash shield
-The blue marks are ovaled holes I made in the new extesion so I would have a little adjustment to work with
The holes are not exactly as pictured, this is just a rough map to give you an idea how I did this.
Last edited by Wades GT; 2/7/13 at 11:31 PM.