What did you do to your '10-'14 today?
Thread Starter
Cobra Member
Joined: March 6, 2004
Posts: 1,010
Likes: 3
From: Monroe, NC
Took mine to a dyno session at a charity event and found out that my 1 week old, bone stock car is putting down 375 HP and 361 TQ. I'm pretty happy with that.
Last edited by John H; May 3, 2014 at 03:18 PM.
Mach 1 Member
Joined: March 27, 2014
Posts: 919
Likes: 0
From: Winnipeg, MB
legacy Tms Member
Joined: February 24, 2007
Posts: 490
Likes: 17
Added the Hellion turbo to my 3.7. Took a week of data logging to get Blow By Racing to get the tune correct, despite the advertised "100% complete with full ECU recalibration" from Hellion.
But after doing some test drives on it the engine started to "tick". For some reason the intake valve on the passenger side, furthest back, is sticking causing a sound like a lifter (V6 doesn't have lifters, the cam lobe pushes the valve directly through a bucket set up) So we need to figure out the reason for the sticky valve now, but no indication of a bent valve.
But after doing some test drives on it the engine started to "tick". For some reason the intake valve on the passenger side, furthest back, is sticking causing a sound like a lifter (V6 doesn't have lifters, the cam lobe pushes the valve directly through a bucket set up) So we need to figure out the reason for the sticky valve now, but no indication of a bent valve.
Thread Starter
Cobra Member
Joined: March 6, 2004
Posts: 1,010
Likes: 3
From: Monroe, NC
Ordered a Roush Axle Back today. Should be here in a couple days. I'm SLIGHTLY worried that it'll be too aggressive sounding, but I've read so many reviews and watch SO many YouTube exhaust clips, I finally (well, I just bought it a week ago today) decided to pull the trigger. Can't wait to get it installed.
Thread Starter
Cobra Member
Joined: March 6, 2004
Posts: 1,010
Likes: 3
From: Monroe, NC
Member
Joined: September 6, 2013
Posts: 5
Likes: 0
I just had an MGW shifter installed in my 2014 Mustang GT. The improvement is just so
awesome compared to the M82 shifter. It cost me about $600 but worth every cent.
The new shifter is an excellent piece of engineering!
awesome compared to the M82 shifter. It cost me about $600 but worth every cent.
The new shifter is an excellent piece of engineering!
I Have No Life
Joined: September 24, 2011
Posts: 10,141
Likes: 172
Added the Hellion turbo to my 3.7. Took a week of data logging to get Blow By Racing to get the tune correct, despite the advertised "100% complete with full ECU recalibration" from Hellion. But after doing some test drives on it the engine started to "tick". For some reason the intake valve on the passenger side, furthest back, is sticking causing a sound like a lifter (V6 doesn't have lifters, the cam lobe pushes the valve directly through a bucket set up) So we need to figure out the reason for the sticky valve now, but no indication of a bent valve.
Mach 1 Member
Joined: August 2, 2013
Posts: 1,003
Likes: 0
From: Frederick, MD
I Have No Life
Joined: September 24, 2011
Posts: 10,141
Likes: 172
Cobra R Member
Joined: March 29, 2012
Posts: 1,687
Likes: 6
From: S.E Michigan
Mach 1 Member
Joined: August 2, 2013
Posts: 1,003
Likes: 0
From: Frederick, MD
I Have No Life
Joined: September 24, 2011
Posts: 10,141
Likes: 172
Member
Joined: November 28, 2013
Posts: 13
Likes: 0
From: Delaware
Added the Hellion turbo to my 3.7. Took a week of data logging to get Blow By Racing to get the tune correct, despite the advertised "100% complete with full ECU recalibration" from Hellion.
But after doing some test drives on it the engine started to "tick". For some reason the intake valve on the passenger side, furthest back, is sticking causing a sound like a lifter (V6 doesn't have lifters, the cam lobe pushes the valve directly through a bucket set up) So we need to figure out the reason for the sticky valve now, but no indication of a bent valve.
But after doing some test drives on it the engine started to "tick". For some reason the intake valve on the passenger side, furthest back, is sticking causing a sound like a lifter (V6 doesn't have lifters, the cam lobe pushes the valve directly through a bucket set up) So we need to figure out the reason for the sticky valve now, but no indication of a bent valve.
