NEW STEEDA WEBSITE
9/9/10, 12:50 PM
#1
Cobra Member
Thread Starter
Join Date: February 14, 2005
Posts: 1,075
Likes: 0
Received 0 Likes
on
0 Posts
NEW STEEDA WEBSITE
Hi everyone, we have just updated to a brand new website.
For those of you who are regulars there and even those who are not. Check it out and give us some feedback on it. Good or bad.
Whether it deals with navigation, product information, anything at all please let us know. We welcome your comments.
www.steeda.com
For those of you who are regulars there and even those who are not. Check it out and give us some feedback on it. Good or bad.
Whether it deals with navigation, product information, anything at all please let us know. We welcome your comments.
www.steeda.com
9/9/10, 01:02 PM
#3
GTR Member
Okay, you asked for it...
First thing is I like the model selector where you choose your car and then supposedly would see all the parts that fit it, but...
When I entered a "2011 Mustang V6 Manual" and then select Cold Air Kits, it shows a page full of parts but all of them have notations that says "Will not fit: 2011 V6 Manual".
Why, when I have selected a particular model from the model selector, why would it show any parts that don't fit that exact model???
I don't care about parts that DON'T fit, all I care about are parts that do fit.
If Steeda doesn't have any parts available yet that fit the car then there should just be a note that comes up saying "No parts available at this time" or something like that instead of showing a bunch of parts that don't fit that car selected.
First thing is I like the model selector where you choose your car and then supposedly would see all the parts that fit it, but...
When I entered a "2011 Mustang V6 Manual" and then select Cold Air Kits, it shows a page full of parts but all of them have notations that says "Will not fit: 2011 V6 Manual".
Why, when I have selected a particular model from the model selector, why would it show any parts that don't fit that exact model???
I don't care about parts that DON'T fit, all I care about are parts that do fit.
If Steeda doesn't have any parts available yet that fit the car then there should just be a note that comes up saying "No parts available at this time" or something like that instead of showing a bunch of parts that don't fit that car selected.
9/9/10, 01:23 PM
#4
Bullitt Member
Join Date: February 17, 2010
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
Okay, you asked for it...
First thing is I like the model selector where you choose your car and then supposedly would see all the parts that fit it, but...
When I entered a "2011 Mustang V6 Manual" and then select Cold Air Kits, it shows a page full of parts but all of them have notations that says "Will not fit: 2011 V6 Manual".
Why, when I have selected a particular model from the model selector, why would it show any parts that don't fit that exact model???
I don't care about parts that DON'T fit, all I care about are parts that do fit.
If Steeda doesn't have any parts available yet that fit the car then there should just be a note that comes up saying "No parts available at this time" or something like that instead of showing a bunch of parts that don't fit that car selected.
First thing is I like the model selector where you choose your car and then supposedly would see all the parts that fit it, but...
When I entered a "2011 Mustang V6 Manual" and then select Cold Air Kits, it shows a page full of parts but all of them have notations that says "Will not fit: 2011 V6 Manual".
Why, when I have selected a particular model from the model selector, why would it show any parts that don't fit that exact model???
I don't care about parts that DON'T fit, all I care about are parts that do fit.
If Steeda doesn't have any parts available yet that fit the car then there should just be a note that comes up saying "No parts available at this time" or something like that instead of showing a bunch of parts that don't fit that car selected.
Reference my past thread "2010 Gauge Pod search"
Last edited by xkornkidx01; 9/9/10 at 01:28 PM.
9/9/10, 01:46 PM
#6
Bullitt Member
Join Date: July 23, 2010
Location: SW-Florida
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
Oh boy... I'm afraid my shopping list will get even longer now...
Checking it out right now...
Looks awesome, Gus! Great job and very nice new features... Lovin' it!!!
Checking it out right now...
Looks awesome, Gus! Great job and very nice new features... Lovin' it!!!
Last edited by 2011 GT; 9/9/10 at 02:00 PM.
9/9/10, 02:15 PM
#8
GTR Member
And I never said that "anything" could be made to fit.
We are not talking about something like that here.
This is a manufacturers website with a model selector to look up parts to fit the specific car that has been selected and then it shows a bunch of parts that have nothing to do with the selected car and has a notation that they won't fit the selected car. If the parts don't fit the car selected then they shouldn't show them.
9/9/10, 02:31 PM
#10
Bullitt Member
Join Date: February 17, 2010
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
Well cry me a river because you can't make a slight modification to something like a simple gauge pod, it was only a suggestion to try to help you find something you could use.
And I never said that "anything" could be made to fit.
We are not talking about something like that here.
This is a manufacturers website with a model selector to look up parts to fit the specific car that has been selected and then it shows a bunch of parts that have nothing to do with the selected car and has a notation that they won't fit the selected car. If the parts don't fit the car selected then they shouldn't show them.
And I never said that "anything" could be made to fit.
We are not talking about something like that here.
This is a manufacturers website with a model selector to look up parts to fit the specific car that has been selected and then it shows a bunch of parts that have nothing to do with the selected car and has a notation that they won't fit the selected car. If the parts don't fit the car selected then they shouldn't show them.
Last edited by xkornkidx01; 9/9/10 at 03:02 PM.
9/9/10, 03:02 PM
#11
MOTM Committee Member
9/9/10, 03:11 PM
#12
Bullitt Member
Join Date: February 17, 2010
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
9/9/10, 03:25 PM
#14
MOTM Committee Member
By the way did you know GTR is a certified Steeda installer?
9/9/10, 03:31 PM
#15
Bullitt Member
Join Date: February 17, 2010
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
The sc is freaking awesome! Yeah I couldn't make it either, they are having the "cnmracers" dyno day this Sunday. No surprise Gonzalo, Ricardo and the rest of the crew can install anything and make these stangs look and perform like monsters!
9/9/10, 03:45 PM
#16
Member
Join Date: December 4, 2009
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Okay, you asked for it...
First thing is I like the model selector where you choose your car and then supposedly would see all the parts that fit it, but...
When I entered a "2011 Mustang V6 Manual" and then select Cold Air Kits, it shows a page full of parts but all of them have notations that says "Will not fit: 2011 V6 Manual".
Why, when I have selected a particular model from the model selector, why would it show any parts that don't fit that exact model???
I don't care about parts that DON'T fit, all I care about are parts that do fit.
If Steeda doesn't have any parts available yet that fit the car then there should just be a note that comes up saying "No parts available at this time" or something like that instead of showing a bunch of parts that don't fit that car selected.
First thing is I like the model selector where you choose your car and then supposedly would see all the parts that fit it, but...
When I entered a "2011 Mustang V6 Manual" and then select Cold Air Kits, it shows a page full of parts but all of them have notations that says "Will not fit: 2011 V6 Manual".
Why, when I have selected a particular model from the model selector, why would it show any parts that don't fit that exact model???
I don't care about parts that DON'T fit, all I care about are parts that do fit.
If Steeda doesn't have any parts available yet that fit the car then there should just be a note that comes up saying "No parts available at this time" or something like that instead of showing a bunch of parts that don't fit that car selected.
I did this because I'm sure there will be people that select the wrong vehicle, etc. I didn't want parts to just 'vanish' off the site.
That was something I considered, but decided against in the end. Instead I move the stuff that fits to the top and fade what does not fit. I can see more bad things happening by hiding them, then good.
If you look at Crutchfield for instance, they show you everything like the Steeda site does and just tells you what does, and does not fit.
Last edited by larryinfl; 9/9/10 at 04:04 PM.
9/9/10, 03:46 PM
#18
Cobra Member
Thread Starter
Join Date: February 14, 2005
Posts: 1,075
Likes: 0
Received 0 Likes
on
0 Posts
9/9/10, 04:00 PM
#20
Member
Join Date: December 4, 2009
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I forgot to move it over. Just put it up for you:
http://www.steeda.com/store/steeda-q...d-mustang.html