Finally, pictures of my 2011 Mustang 5.0
#21
GT Member
Join Date: August 24, 2010
Location: Middle Tennessee
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
How did you change the pony grille emblem? Did you have to break the studs off of the stock one and reuse the nuts? Or is there a way to remove them without damaging the chrome pony? Thanks!
#22
Overboost wrote this up. Hope it helps.
"You need to pull the 8 push clips out of the headlight cover, then take the two screws out holding the grille in place. Lift up the tabs and pull gently on the grille towards you. Removing the pony is the trickiest, as it's held in place with pressure washers. I took two flat screwdrivers and wiggled them, and had a friend catch as they got close. When I put the new pony in, I used an 8mm socket and pushed them back on gently. "
#23
Mach 1 Member
Join Date: April 22, 2010
Location: NoVA
Posts: 507
Likes: 0
Received 0 Likes
on
0 Posts
#26
You can break the clips off if you don't care about the old pony. I tried to keep it in somewhat decent shape should I ever have someone interested in it or need/want to swap it again.
#34
I am Shauny Clause
MOTM July 2010 Winner
MOTM July 2010 Winner
Join Date: November 25, 2009
Location: Metro Detroit
Posts: 1,519
Likes: 0
Received 0 Likes
on
0 Posts
looks great did you hae the GT/CS front end when I put your exhaust on? me likey.
Thread
Thread Starter
Forum
Replies
Last Post
MRGTX
2012-2013 BOSS 302
12
8/7/15 08:29 AM
MRGTX
2015 - 2023 MUSTANG
5
7/21/15 02:08 PM