IUP DOOR SILL PLATE
Member
Joined: January 20, 2005
Posts: 14
Likes: 0
Ok... so this is as easy as it sounds?
You just pull the old plate off (the whole thing) and then push down on the new plate to pop it into place (presumably with the clips on the new one)?
What are the adhesive strips for?
(btw -- one of mine is backordered. That's right - they got in one side and not the other for some reason)
You just pull the old plate off (the whole thing) and then push down on the new plate to pop it into place (presumably with the clips on the new one)?
What are the adhesive strips for?
(btw -- one of mine is backordered. That's right - they got in one side and not the other for some reason)
GT Member
Joined: January 21, 2005
Posts: 184
Likes: 0
It is that easy.... Once you pull the old one off you'll be able to see. When I pulled off the original one on mine the adhesive part was not even stuck down.
You just pull the red backing strip off and line up the clips and push until it snaps into place. I made sure I pressed a little harder where the tape is to make sure it stuck.
and I only received my drivers side also....the pass. is coming the second week of Feb.
You just pull the red backing strip off and line up the clips and push until it snaps into place. I made sure I pressed a little harder where the tape is to make sure it stuck.
and I only received my drivers side also....the pass. is coming the second week of Feb.
Thread Starter
Administrator clevparts@aol.com
Joined: November 27, 2004
Posts: 12,567
Likes: 4,317
From: Visalia Ca.
Hello!
Glad the post was helpful! I will be stocking most of the IUP parts at The Dealership and they will be available for internet sale! Steering wheels,door handles,sill plates,shifter ***** and some of the Genuine Accessories!
KC
Glad the post was helpful! I will be stocking most of the IUP parts at The Dealership and they will be available for internet sale! Steering wheels,door handles,sill plates,shifter ***** and some of the Genuine Accessories!
KC
Member
Joined: December 14, 2004
Posts: 25
Likes: 0
Originally posted by 05stangkc@January 28, 2005, 9:23 PM
Hello!
Glad the post was helpful! I will be stocking most of the IUP parts at The Dealership and they will be available for internet sale! Steering wheels,door handles,sill plates,shifter ***** and some of the Genuine Accessories!
KC
Hello!
Glad the post was helpful! I will be stocking most of the IUP parts at The Dealership and they will be available for internet sale! Steering wheels,door handles,sill plates,shifter ***** and some of the Genuine Accessories!
KC
GT Member
Joined: January 10, 2005
Posts: 104
Likes: 0
Got mine in today. They both look the same. I see no difference between the right and left one. They are different part numbers so I assume they are different but it looks as if I could have bought two of the cheaper ones and it would have worked fine.
Thread Starter
Administrator clevparts@aol.com
Joined: November 27, 2004
Posts: 12,567
Likes: 4,317
From: Visalia Ca.
Originally posted by BlackMustangGT07@February 19, 2005, 3:30 PM
That looks like a great upgrade idea, but I'm alittle confused - I thought those came with the full IUP? Or am I just completly out of it today?
That looks like a great upgrade idea, but I'm alittle confused - I thought those came with the full IUP? Or am I just completly out of it today?
kc
GT Member
Joined: January 10, 2005
Posts: 104
Likes: 0
3rd Times A Charm
Joined: February 17, 2005
Posts: 2,459
Likes: 0
[/quote]
What site do I go to for purchasing these parts? You have given me motivation KC, I was one of the buy it right off the lot guys. 11/13/04, the day my life began again.
[/quote]
I bought my GT on the same day. Or should I say I gave birth to my baby
Definately need the metal door sills. Sorry to any non metallic owners, but I really don't like them.
What site do I go to for purchasing these parts? You have given me motivation KC, I was one of the buy it right off the lot guys. 11/13/04, the day my life began again.
[/quote]
I bought my GT on the same day. Or should I say I gave birth to my baby
Definately need the metal door sills. Sorry to any non metallic owners, but I really don't like them.
Mach 1 Member
Joined: February 25, 2005
Posts: 845
Likes: 0
This is a great mod! I bought them from my local Ford dealer (I had a discount coupon) and they went on super easy. They also look great with the IUP lite I have. Definately a cheap, easy mod with big payoff in the looks department!
Thread Starter
Administrator clevparts@aol.com
Joined: November 27, 2004
Posts: 12,567
Likes: 4,317
From: Visalia Ca.
Ford Keeps Raising the prices on these with no Rhyme or Reason! One color one side at a time! Get them While they are still Resonable! I have in stock usually!
kc
kc
V6 Member
Joined: March 1, 2005
Posts: 80
Likes: 0
Thanks Kevin! I got my new door sills in today and installed them. 
I'm not exactly sure of what the total cost is that you charged me because you didn't include a packing slip, but that's cool. I'll just wait until it shows up on my credit card bill.
I'm not exactly sure of what the total cost is that you charged me because you didn't include a packing slip, but that's cool. I'll just wait until it shows up on my credit card bill.