2011 Parts on the way!
#61
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,901
Received 3,157 Likes
on
2,311 Posts
These should Fit any Factory 05 up Style Wheel than can Use the Non Recessed Tribar as Released in 05. Approx $75.00 Shipped to the Lower 48. These are Currently on B/O From Ford. I have some intransit.
KC
KC
Last edited by 05stangkc; 5/19/10 at 10:50 AM.
#62
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,901
Received 3,157 Likes
on
2,311 Posts
#65
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,901
Received 3,157 Likes
on
2,311 Posts
Here is the Other New 2011 Cap. It is Identical to the 2005 Mustang Bullitt Wheel Cap Yet it is a Very Metallic Dark Silver. Pretty cap.
KC
KC
#66
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,901
Received 3,157 Likes
on
2,311 Posts
On a Cs66 it is a {Light} Snug Fit. I would Guess since all the Shelby Wheels use the same cap it would fit the same on a 69. The last Pic is the Pony Cap. That little Nub make thes Cap Sit out just a bit. I believe if they were Filed off it would be a tighter Fit on the CS Wheels.
KC
#67
Legacy TMS Member
#69
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,901
Received 3,157 Likes
on
2,311 Posts
#70
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,901
Received 3,157 Likes
on
2,311 Posts
#73
Cobra Member
Join Date: October 15, 2008
Location: Brew City
Posts: 1,373
Likes: 0
Received 0 Likes
on
0 Posts
How's This!
On a Cs66 it is a {Light} Snug Fit. I would Guess since all the Shelby Wheels use the same cap it would fit the same on a 69. The last Pic is the Pony Cap. That little Nub make thes Cap Sit out just a bit. I believe if they were Filed off it would be a tighter Fit on the CS Wheels.
KC
On a Cs66 it is a {Light} Snug Fit. I would Guess since all the Shelby Wheels use the same cap it would fit the same on a 69. The last Pic is the Pony Cap. That little Nub make thes Cap Sit out just a bit. I believe if they were Filed off it would be a tighter Fit on the CS Wheels.
KC
So many of those little nubs are on each cap?? And is it plastic or metal?
I just need to give these a try as they would be a nice improvement over the CS ones
#74
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,901
Received 3,157 Likes
on
2,311 Posts
#75
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,901
Received 3,157 Likes
on
2,311 Posts
KC
#76
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,901
Received 3,157 Likes
on
2,311 Posts
#77
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,901
Received 3,157 Likes
on
2,311 Posts
https://themustangsource.com/newrepl...reply&t=482175
Original Post
2011 GT-500 Rear Axle Cover
Here is 6 Pounds of fun! Look at this Hefty Dude! It has Boss's Get it Boss's For and Oiling System already cast in. It also Has an open hole at the top which I believe is for an external vent of some sort. It is not cataloged so I have a Inquiry into FORD for some more part numbers.
Anyhoo These are Way cool. Also these Covers take a Longer Bolt than the Stamped Steel cover and Ford has a Whopping $13.00 Per Bolt tag on them. I already have a Price Inquiry into Ford to see if that can be Adjusted. If Not I can certainly come up with a Suitable Replacement far cheaper.
Enjoy,
KC
Original Post
2011 GT-500 Rear Axle Cover
Here is 6 Pounds of fun! Look at this Hefty Dude! It has Boss's Get it Boss's For and Oiling System already cast in. It also Has an open hole at the top which I believe is for an external vent of some sort. It is not cataloged so I have a Inquiry into FORD for some more part numbers.
Anyhoo These are Way cool. Also these Covers take a Longer Bolt than the Stamped Steel cover and Ford has a Whopping $13.00 Per Bolt tag on them. I already have a Price Inquiry into Ford to see if that can be Adjusted. If Not I can certainly come up with a Suitable Replacement far cheaper.
Enjoy,
KC
Last edited by 05stangkc; 5/20/10 at 04:43 PM.
#78
The Analog Admin!
Thread Starter
Join Date: November 27, 2004
Location: Visalia Ca.
Posts: 10,901
Received 3,157 Likes
on
2,311 Posts
KC
Last edited by 05stangkc; 12/12/11 at 03:20 PM.
#80
Legacy TMS Member
KC,
A member here confirmed that he had the illuminated mirror visors on his 2011. I guess Ford went through with putting them on after all. Can we confirm a part number for these?
Cheers
A member here confirmed that he had the illuminated mirror visors on his 2011. I guess Ford went through with putting them on after all. Can we confirm a part number for these?
Cheers