My True HID Projector Headlight Retrofit projects
#1
My True HID Projector Headlight Retrofit projects
Just wanted to show off the headlights I build. I convert halogen mustang lights into custom high end hid projector headlights as a hobby.
on too some pics (I post new pics as I make sets built to order so read through for more pictures)
during the aiming process... nice clean sharp cutoff
This is a Bixenon setup heres a shot of the highs
lights were sealed with rubber butyl tape (which is what oem sealant is) and then i went back over the seams with clear silicone for added measure to ensure no condensation. silicone is white in pictures but dries clear.
please excuse how dirty the car is I had to move it outside for a few days for garage space and it snowed!
[youtube_browser]10anvazSGTk[/youtube_browser]
THERE ARE A TON OF PICTURES THROUGHOUT THE THREAD PLEASE READ THROUGH
if you like what you see reply here or shoot me a pm and you could have your own set!
if you would like to follow new projects and lights of mine add my page on facebook, Yuke's HID Retrofits
http://www.facebook.com/YukesHIDRetrofits
Dark Smoke 99-04 Retrofit
Stock 94-98 Cobra Style Retrofit
messing around...
"Snake Eyes"
Finished
Smoked 94-98 Retrofit
clear lens, black housing, clear corner 99-04 lights!
Here you can see my smoked set on the passenger side and the black/clear set on the driver side. I will be switching mine over to black/clear as well.
Here are some more of the black/clear lights
Satin black housing, clear lens, amber corner 99-04 lights
Satin black housing, clear lens, clear corner 99-04 lights featuring white ccfl halos, painted snake eyes, and red led demon eyes
With some flash.
No flash...
test fitting on my car
Brian's lights on his OW 04 cobra
Brians lights on his car, hope to have pics of leds and halos soon
Black accented turn signals on the housings
Some competition orange, not everybody's cup of tea, but badass none the less
Few teasers of the comp o lights finished, more pics on facebook: Yuke's HID Retrofits | Facebook
More new edge...
From left to right: FX-R, Mini D2s, Mini H1
99-00 civic in progress
Civic Complete
2008 Toyota 4Runner quad retrofit
Stock headlights, low beam halogen projector, high beam reflector. In stock form they operate independently. I am swapping in two bixenon projectors which will both be on at the high and low beam positions.
Opened, stock single beam projector still in
Everything out
New projectors in
progress
Finished
Color Changing LEDs
[youtube_browser]12VH52nczWo[/youtube_browser]
Here is my 01 with dark smoked lenses and 4300k Shining through.
Black housing clear lens 94-98 mustang lights
New edge black trim tail light
LEDs
Satin black housing, mh1 projector, 99-04 lights
Satin black housing, silver metallic shroud, FX-R 3.0, clear corner 99-04 retrofit
Made these for my father's 2005 convertible courtesy of my headlight retrofit company, going for that retro look without the cheesy look of the other versions out there.
I love how the color brings the gill accents to life...
So what do you think?
on too some pics (I post new pics as I make sets built to order so read through for more pictures)
during the aiming process... nice clean sharp cutoff
This is a Bixenon setup heres a shot of the highs
lights were sealed with rubber butyl tape (which is what oem sealant is) and then i went back over the seams with clear silicone for added measure to ensure no condensation. silicone is white in pictures but dries clear.
please excuse how dirty the car is I had to move it outside for a few days for garage space and it snowed!
[youtube_browser]10anvazSGTk[/youtube_browser]
THERE ARE A TON OF PICTURES THROUGHOUT THE THREAD PLEASE READ THROUGH
if you like what you see reply here or shoot me a pm and you could have your own set!
if you would like to follow new projects and lights of mine add my page on facebook, Yuke's HID Retrofits
http://www.facebook.com/YukesHIDRetrofits
Dark Smoke 99-04 Retrofit
Stock 94-98 Cobra Style Retrofit
messing around...
"Snake Eyes"
Finished
Smoked 94-98 Retrofit
clear lens, black housing, clear corner 99-04 lights!
Here you can see my smoked set on the passenger side and the black/clear set on the driver side. I will be switching mine over to black/clear as well.
Here are some more of the black/clear lights
Satin black housing, clear lens, amber corner 99-04 lights
Satin black housing, clear lens, clear corner 99-04 lights featuring white ccfl halos, painted snake eyes, and red led demon eyes
With some flash.
No flash...
test fitting on my car
Brian's lights on his OW 04 cobra
Brians lights on his car, hope to have pics of leds and halos soon
Black accented turn signals on the housings
Some competition orange, not everybody's cup of tea, but badass none the less
Few teasers of the comp o lights finished, more pics on facebook: Yuke's HID Retrofits | Facebook
More new edge...
From left to right: FX-R, Mini D2s, Mini H1
99-00 civic in progress
Civic Complete
2008 Toyota 4Runner quad retrofit
Stock headlights, low beam halogen projector, high beam reflector. In stock form they operate independently. I am swapping in two bixenon projectors which will both be on at the high and low beam positions.
Opened, stock single beam projector still in
Everything out
New projectors in
progress
Finished
Color Changing LEDs
[youtube_browser]12VH52nczWo[/youtube_browser]
Here is my 01 with dark smoked lenses and 4300k Shining through.
Black housing clear lens 94-98 mustang lights
New edge black trim tail light
LEDs
Satin black housing, mh1 projector, 99-04 lights
Satin black housing, silver metallic shroud, FX-R 3.0, clear corner 99-04 retrofit
Made these for my father's 2005 convertible courtesy of my headlight retrofit company, going for that retro look without the cheesy look of the other versions out there.
I love how the color brings the gill accents to life...
So what do you think?
#5
Thank you sir!
Sooo pricing, its hard to throw general #s out because each set is custom and prices vary but if you want the basic kits here is a reference point
Base kit: Includes new headlights of your choice, mh1 projectors, shrouds of your choice, paint color of your choice, bulbs the color of your choice, ballasts, ballasts, wiring harness, hardware, sealants, labor etc... $675
FX-R uograde: Includes everything above except the projector is upgraded to the FX-R. $750
If you wish to send me your own lights subtract $100 from the price above
Other makes and models vary, discounts for make and model I have not experimented with yet.
Price does not include shipping, any local guys receive free help on the install.
For additional costs the following can be added: OEM paint match, side emitting leds, led halos, ccfl halos, led demon eyes, painted demon eyes, smoked corner reflectors, hydrographics, and anything else you can think of...
Next up...
99-04 cobra fog lights, bixenon capable
2011 Nissan Titan FX-R & mh1 Quad retrofit
#6
Join Date: August 23, 2004
Location: Bay Area, California
Posts: 3,599
Likes: 0
Received 3 Likes
on
2 Posts
I really wish I had that cash to spend right now because those lights just look so good, and the light from the pictures of you aiming them looks incomparable to the stockers. I've seen a lot of custom set ups and the pricing you posted up looks very good in comparison.
#8
2011 Nissan Titan FX-R & mh1 Quad retrofit
IMG]http://i124.photobucket.com/albums/p40/yuke175/2012-08-26_21-24-46_937.jpg[/IMG]
Amber XB LED Angel Eyes...
Hidden Halo
are projectors in the bowl and center housings separate
center housings over bare projectors
Mini Gatling shroud and Bixenon Monogram
Both Shrouds on, The full size gatling is just a mock up here. Need to do some inside trimming so it slips over the back of the FX-R
IMG]http://i124.photobucket.com/albums/p40/yuke175/2012-08-26_21-24-46_937.jpg[/IMG]
Amber XB LED Angel Eyes...
Hidden Halo
are projectors in the bowl and center housings separate
center housings over bare projectors
Mini Gatling shroud and Bixenon Monogram
Both Shrouds on, The full size gatling is just a mock up here. Need to do some inside trimming so it slips over the back of the FX-R
#12
#13
$25 OFF 2005-Present lights order before Friday! email info@yukeshidretrofits.com to take advantage
#16
GT Member
Just wanted to show off the headlights I build. I convert halogen mustang lights into custom high end hid projector headlights as a hobby.
on too some pics (I post new pics as I make sets built to order so read through for more pictures)
during the aiming process... nice clean sharp cutoff
This is a Bixenon setup heres a shot of the highs
lights were sealed with rubber butyl tape (which is what oem sealant is) and then i went back over the seams with clear silicone for added measure to ensure no condensation. silicone is white in pictures but dries clear.
please excuse how dirty the car is I had to move it outside for a few days for garage space and it snowed!
[youtube_browser]10anvazSGTk[/youtube_browser]
THERE ARE A TON OF PICTURES THROUGHOUT THE THREAD PLEASE READ THROUGH
if you like what you see reply here or shoot me a pm and you could have your own set!
if you would like to follow new projects and lights of mine add my page on facebook, Yuke's HID Retrofits
http://www.facebook.com/YukesHIDRetrofits
Dark Smoke 99-04 Retrofit
Stock 94-98 Cobra Style Retrofit
messing around...
"Snake Eyes"
Finished
Smoked 94-98 Retrofit
clear lens, black housing, clear corner 99-04 lights!
Here you can see my smoked set on the passenger side and the black/clear set on the driver side. I will be switching mine over to black/clear as well.
Here are some more of the black/clear lights
Satin black housing, clear lens, amber corner 99-04 lights
Satin black housing, clear lens, clear corner 99-04 lights featuring white ccfl halos, painted snake eyes, and red led demon eyes
With some flash.
No flash...
test fitting on my car
Brian's lights on his OW 04 cobra
Brians lights on his car, hope to have pics of leds and halos soon
Black accented turn signals on the housings
Some competition orange, not everybody's cup of tea, but badass none the less
Few teasers of the comp o lights finished, more pics on facebook: Yuke's HID Retrofits | Facebook
More new edge...
From left to right: FX-R, Mini D2s, Mini H1
99-00 civic in progress
Civic Complete
2008 Toyota 4Runner quad retrofit
Stock headlights, low beam halogen projector, high beam reflector. In stock form they operate independently. I am swapping in two bixenon projectors which will both be on at the high and low beam positions.
Opened, stock single beam projector still in
Everything out
New projectors in
progress
Finished
Color Changing LEDs
[youtube_browser]12VH52nczWo[/youtube_browser]
Here is my 01 with dark smoked lenses and 4300k Shining through.
Black housing clear lens 94-98 mustang lights
New edge black trim tail light
LEDs
Satin black housing, mh1 projector, 99-04 lights
Satin black housing, silver metallic shroud, FX-R 3.0, clear corner 99-04 retrofit
Made these for my father's 2005 convertible courtesy of my headlight retrofit company, going for that retro look without the cheesy look of the other versions out there.
I love how the color brings the gill accents to life...
So what do you think?
on too some pics (I post new pics as I make sets built to order so read through for more pictures)
during the aiming process... nice clean sharp cutoff
This is a Bixenon setup heres a shot of the highs
lights were sealed with rubber butyl tape (which is what oem sealant is) and then i went back over the seams with clear silicone for added measure to ensure no condensation. silicone is white in pictures but dries clear.
please excuse how dirty the car is I had to move it outside for a few days for garage space and it snowed!
[youtube_browser]10anvazSGTk[/youtube_browser]
THERE ARE A TON OF PICTURES THROUGHOUT THE THREAD PLEASE READ THROUGH
if you like what you see reply here or shoot me a pm and you could have your own set!
if you would like to follow new projects and lights of mine add my page on facebook, Yuke's HID Retrofits
http://www.facebook.com/YukesHIDRetrofits
Dark Smoke 99-04 Retrofit
Stock 94-98 Cobra Style Retrofit
messing around...
"Snake Eyes"
Finished
Smoked 94-98 Retrofit
clear lens, black housing, clear corner 99-04 lights!
Here you can see my smoked set on the passenger side and the black/clear set on the driver side. I will be switching mine over to black/clear as well.
Here are some more of the black/clear lights
Satin black housing, clear lens, amber corner 99-04 lights
Satin black housing, clear lens, clear corner 99-04 lights featuring white ccfl halos, painted snake eyes, and red led demon eyes
With some flash.
No flash...
test fitting on my car
Brian's lights on his OW 04 cobra
Brians lights on his car, hope to have pics of leds and halos soon
Black accented turn signals on the housings
Some competition orange, not everybody's cup of tea, but badass none the less
Few teasers of the comp o lights finished, more pics on facebook: Yuke's HID Retrofits | Facebook
More new edge...
From left to right: FX-R, Mini D2s, Mini H1
99-00 civic in progress
Civic Complete
2008 Toyota 4Runner quad retrofit
Stock headlights, low beam halogen projector, high beam reflector. In stock form they operate independently. I am swapping in two bixenon projectors which will both be on at the high and low beam positions.
Opened, stock single beam projector still in
Everything out
New projectors in
progress
Finished
Color Changing LEDs
[youtube_browser]12VH52nczWo[/youtube_browser]
Here is my 01 with dark smoked lenses and 4300k Shining through.
Black housing clear lens 94-98 mustang lights
New edge black trim tail light
LEDs
Satin black housing, mh1 projector, 99-04 lights
Satin black housing, silver metallic shroud, FX-R 3.0, clear corner 99-04 retrofit
Made these for my father's 2005 convertible courtesy of my headlight retrofit company, going for that retro look without the cheesy look of the other versions out there.
I love how the color brings the gill accents to life...
So what do you think?
#17
Price range?
I'm assuming you make these and sell them. I really love the idea of the one projector headlight for my 1999 Ford Mustang. If you could get back with me on like different designs or options that are possible with the prices and such I'm pretty interested. Thanks.
#18
Bullitt Member
The cost of these is just unreal IMO. If you can get the cost for full featured setups to max out at $400 (for Mustangs) and typical setups in the mid $300's, then I'm interested.
#19
Mach 1 Member
I would be willing to bite, but I am concerned the looks I want (or have in mind) would put the price point too far out of reach looks like a really neat thing to do however!!!