CDC Gauge Pod
Thread Starter
Cobra Member
Joined: August 5, 2004
Posts: 1,221
Likes: 0
Price: $124.95
Designed and Engineered by CDC. This high temp ABS product will be molded in black with a paintable smooth finish or molded with matching grain and color. Attachment process will bolt down or acrylic bonding tape (process at owners discretion)
Designed and Engineered by CDC. This high temp ABS product will be molded in black with a paintable smooth finish or molded with matching grain and color. Attachment process will bolt down or acrylic bonding tape (process at owners discretion)
Thread Starter
Cobra Member
Joined: August 5, 2004
Posts: 1,221
Likes: 0
Cobra Member
Joined: November 27, 2004
Posts: 1,303
Likes: 2
From: Albuquerque, New Mexico
I have to agree. CDC needs to go back to the drawing board. There current "pod" is just tacky. No way that will find it's way into my car's interior. If they would just get rid of that "shelf" thing it is sitting on, then maybe..
Team Mustang Source
Joined: January 30, 2004
Posts: 2,298
Likes: 4
From: Tampa FL
Originally posted by adrenalin@January 11, 2005, 1:46 PM
I definately prefer the Saleen pod better. Now to figure out what guage I would put in there other than an accurate oil pressure guage.
I definately prefer the Saleen pod better. Now to figure out what guage I would put in there other than an accurate oil pressure guage.
Legacy TMS Member
Joined: December 8, 2004
Posts: 1,817
Likes: 4
Originally posted by MTAS+January 11, 2005, 12:58 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (MTAS @ January 11, 2005, 12:58 PM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-adrenalin@January 11, 2005, 1:46 PM
I definately prefer the Saleen pod better. Now to figure out what guage I would put in there other than an accurate oil pressure guage.
I definately prefer the Saleen pod better. Now to figure out what guage I would put in there other than an accurate oil pressure guage.
[/b][/quote]Most definately agree!
Cobra Member
Joined: November 27, 2004
Posts: 1,303
Likes: 2
From: Albuquerque, New Mexico
It's funny. I got the "can't drill/cut/modify the car" thing out of me already. And I don't even have the car yet!
I'm buying this thing to be my toy (and daily driver). I intend to make this car MY car. And if that means drilling a few holes or cutting some sheet metal, so be it.
If and when, down the road, I decide to return it to stock, I'll buy the needed parts and rebuild it. The only thing I WON'T do is toss out all the stock parts that are replaced (stereo parts included!). I can still hear the cries of agony from my cousin as he related to me his sad tale of trying to track down emissions equipment for his 1969 Mach 1. That he had tossed in the trash when he was hot rodding it while he was in highschool back in the '80s.... I think he paid over $1000 for the proper emissions system when it was all said and done...
I'm buying this thing to be my toy (and daily driver). I intend to make this car MY car. And if that means drilling a few holes or cutting some sheet metal, so be it.
If and when, down the road, I decide to return it to stock, I'll buy the needed parts and rebuild it. The only thing I WON'T do is toss out all the stock parts that are replaced (stereo parts included!). I can still hear the cries of agony from my cousin as he related to me his sad tale of trying to track down emissions equipment for his 1969 Mach 1. That he had tossed in the trash when he was hot rodding it while he was in highschool back in the '80s.... I think he paid over $1000 for the proper emissions system when it was all said and done...
