Well, After 4 months of waiting, I finally got my chin spoiler delivered a couple weeks ago, and last weekend put it on. In all, it took less than an hour to do. I'm pleased with the look, and the installation was pretty easy. I'm not that fond of the sharp corners at the back edge of the sides, and might have to round them off some way to make them look a little better. The finish looks good though, and I think I'm going to keep it black, instead of re-painting it Sonic Blue to match the car.

My car isn't lowered at all, and after scraping on driveways nearly every day since I installed the spoiler, I probably won't lower it. I do want to put a rear spoiler on sometime, probably the 3DCarbon ducktail.

Anyway, here are a couple pictures I took after the install. Let's hear it, what do you all think?

 

I like it. It looks smaller than the CDC spoiler.

How much was it?

Do you have a full car picture?

 

I ordered it in April for $255, with free shipping.

Not sure how much clearance I have now, guess I should measure that. And if someone with the CDC wants to measure theirs, we can get an idea of the difference. I know it scrapes a lot of driveways (just did it again pulling out of Wendy's), and that's with a stock suspension.

I don't have a full car picture since installing it, the car's been dirty. I will try to get one this weekend when I get a chance to clean and polish her up again.

 

I ORDERED ONE LAST MONTH. PAID, AND IT HAS ALREADY BEEN TAKEN OUT OF MY ACCOUNT. NOT SURE WHY THEY ARE SO SLOW, BUT IT IS STARTING TO CONCERN ME. I LIKE THE WAY THE SPOILER LOOKS. I ORDERED BLACK AND IT SHOULD LOOK GOOD ON BY BLACK 05. ANYWAY, ANY ADVICE ON THE INSTALL???. MR. KLOK WHERE IS MY ORDER/?????

 

:shock: cap monster... :shock:

 

Been about a month for me as well, oh well, it comes when it comes.

At least I know it does look good.

 

Looks good, but "you scrape it everyday"....

How long is it going to last ?

 

I have had my chin spoiler since June and my car is lowered and I haven't had any problems with mine. If you go to the members gallery, you can see a full shot of how it looks on the yellow car.

 

Installation was easy, just need a couple of spring clamps for each side, and a drill. I did find out that the bolts for the sides are a little short, so I need to get some longer bolts. Jim recommended 1/4-20 1/2 inch, and in one place, the fiberglass was too thick, I can't even get the nut on it. I'll go with 3/4 inch, and that should give me enough room for the lock-washers as well.

As for scraping, it's light scrapes, not like I'm sanding it away as I drive, and the fiberglass is really solid and thick on this spoiler. I only scrape on drainage gulleys at a couple intersections, and a couple of drive-ways. As flat as Las Vegas looks, there sure are a lot of fairly steep drive-ways where they meet the street.

 

Banana-bady, I recall in a previous post you are dealing with Shinoda (James Klok) on a regular basis. I believe they are in Milton Florida. Any idea why they are taking so long to get orders out? They are not even answering e-mails. The last contact I had with them Jim said he would get it out right away and email the tracking number. Nothing sence.

 

Yes I am in contact with Mr. Klock several times a month, we are SPVA Team Members. He is still in Milton and is in the process of relocating to Pensacola. I am printing the forum and bringing this to his attention. Hopefully, I can have an answer for all of you soon.

 

Got any other pictures w/ the whole car in it?

 

Thanks Banana-Baby, It seems like they make a good product, however, thier business savy is a little short. Any help would be appreciated. Tell Jim I'm the guy in Parrish, FL. I looked for a pic of your car in the member section, the ones i found did not have the chin spoiler.

Jayguy. Thanks for the info. I am going to stop at home depoit and get some stainless bolts the size you recomended.

 

Ok, I've got some new pictures of the whole car, to show off the new front spoiler. Hope you like 'em.

 

[quote=SRQ05GT,September 10, 2005, 6:40 AM]
Thanks Banana-Baby, It seems like they make a good product, however, thier business savy is a little short. Any help would be appreciated. Tell Jim I'm the guy in Parrish, FL. I looked for a pic of your car in the member section, the ones i found did not have the chin spoiler.

Jayguy. Thanks for the info. I am going to stop at home depoit and get some stainless bolts the size you recomended.
[/quote

 

try these pics of the chin spoiler. I also talked to Mr. Klock and even printed the forum out and gave it to him. He said, he is going to contact you on this matter.

 

Thanks Banama-Baby. PS if thats you in the Pic, how do you see over the dash

Jayguy. Looks great cant wait for mine.

 

:scratch: That's my mechanic

 

this is what it looks like up close and after it was installed

 

Jeff could you please contact me about your order?