Street Scene center fog light grille review
Bullitt Member
Joined: February 7, 2005
Posts: 410
Likes: 0
GOT MY GRILLE TODAY!!!! wow it is good quality and fitment. getting the stock one to snap out was a bltch!, but once out, the SS one went in in 3-5minutes and has absolutely perfect fitment.
the sides of the fog lights line up PERFECTLY with my center stripe, OMFG it looks orgasmic.
MCD gets a HUGE A+ on this one, and so does SS!
the sides of the fog lights line up PERFECTLY with my center stripe, OMFG it looks orgasmic.
MCD gets a HUGE A+ on this one, and so does SS!
V6 Member
Joined: June 6, 2006
Posts: 57
Likes: 0
Originally Posted by stkdidy
GOT MY GRILLE TODAY!!!! wow it is good quality and fitment. getting the stock one to snap out was a bltch!, but once out, the SS one went in in 3-5minutes and has absolutely perfect fitment.
the sides of the fog lights line up PERFECTLY with my center stripe, OMFG it looks orgasmic.
MCD gets a HUGE A+ on this one, and so does SS!
the sides of the fog lights line up PERFECTLY with my center stripe, OMFG it looks orgasmic.
MCD gets a HUGE A+ on this one, and so does SS!
Took a quick spin to a parking lot last night to check and adjust. Driver's side is just a bit high, couldn't lower it because of the tight fit so I brought the passenger side up. Driving to work this morning didn't seem like it was shining high. I guess if I get flashed any time soon I'll know for sure
T
Bullitt Member
Joined: February 7, 2005
Posts: 410
Likes: 0
yes my driver side plug touches the frame...but its not "wedged" there, so i feel confident its ok based on high firmly this grille fits in place. the pass side does not sag lower...i think its the frame of the car that creates that illusion on install. i measured both with a piece of string from the top of the bumper, and they were even
Team Mustang Source Legacy Member
Joined: August 23, 2004
Posts: 5,448
Likes: 13
Someone refresh my memory. Is this a copy of the GT grille or the V6? In other words what size are the honeybombs? smaller=V6, larger=GT
There's not much of a difference. Hard to tell unless you have them side by side. I was just curious since it would be easier to make the original prototype from the V6 grille.
There's not much of a difference. Hard to tell unless you have them side by side. I was just curious since it would be easier to make the original prototype from the V6 grille.
Team Mustang Source
Joined: December 12, 2004
Posts: 5,801
Likes: 5
From: NorCal
Originally Posted by StangNut
Someone refresh my memory. Is this a copy of the GT grille or the V6? In other words what size are the honeybombs? smaller=V6, larger=GT
There's not much of a difference. Hard to tell unless you have them side by side. I was just curious since it would be easier to make the original prototype from the V6 grille.
There's not much of a difference. Hard to tell unless you have them side by side. I was just curious since it would be easier to make the original prototype from the V6 grille.
I would have to say that it it just like the GT OEM grille honeycombs.
Mach 1 Member
Joined: July 25, 2005
Posts: 921
Likes: 0
Originally Posted by Mustang Mike 05
It was designed off the GT - larger.. Trust me- if we can find ways to things the hard way.. we will. It would have been easier to design it off the V6
Team Mustang Source
Joined: December 12, 2004
Posts: 5,801
Likes: 5
From: NorCal
A couple of installation hints:
1. Make sure that the fogs are totally seated in the housing. You don't want to have to mess with tightening screws once the grille is reinstalled.
2. Make sure that the right (drivers side) is under the metal before you plug in the extension. If you plug it in first it is a pita to get under the metal flange and you might even damage the extension.
Rich~
1. Make sure that the fogs are totally seated in the housing. You don't want to have to mess with tightening screws once the grille is reinstalled.
2. Make sure that the right (drivers side) is under the metal before you plug in the extension. If you plug it in first it is a pita to get under the metal flange and you might even damage the extension.
Rich~
Administrator clevparts@aol.com
Joined: November 27, 2004
Posts: 12,556
Likes: 4,309
From: Visalia Ca.
http://forums.bradbarnett.net/showpo...5&postcount=29
PICS OF MY REDFIRE GT/CS With S/S Center Grille and Emblem Options!
kc
Image Gallery with PicTiger
PICS OF MY REDFIRE GT/CS With S/S Center Grille and Emblem Options!
kc
Image Gallery with PicTiger
