05-09 Exterior Modifications Making Your '05 Stand Out from the Crowd

SHOW US YOUR WHEELS 2005-2009 S-197 GEN 1 Only

Thread Tools
 
Search this Thread
 
Old 4/11/07, 10:56 PM
  #561  
V6 Member
 
relayagent's Avatar
 
Join Date: June 21, 2004
Posts: 69
Likes: 0
Received 2 Likes on 1 Post
Originally Posted by Javdog
Hi here are my wheels they are a new brand that came out this March of 2007, Avarus AV2 and the fronts are 20x8.5 with 245x35x20 and the rears are 20x10 with 285x30x20 with Toyo T1R rubbers, What do you guys think of the wheels?
they look great..

i'm actually set on the avarus av1 vercelli wheels.. they're a little different from a lot of the ones on here but i think they'll look pretty good on a mustang. where'd you get em and how much? i found mine online for $2374 with nt555..20x8.5 fr and 20x10.5 rr. also, did you move the tpms sensors?
Old 4/12/07, 10:40 AM
  #562  
Bullitt Member
 
mustangdaren's Avatar
 
Join Date: May 21, 2005
Location: Hildebran, NC
Posts: 259
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by fivestring45
Well Here we go...
20" Razors with Bright Silver Finish. (Matches the IUP package Perfectly)
Tires are 265/35/20 Nitto 555's
Car will be lowered shortly with Steeda Ultra Lites

Also I ordered the Shelby Center caps but they were plastic while the AMR ones are machined Alluminum. Also, they are a completly different design and I don't see how they should even fit. I'm returning them. I've included the pic of the 2 different designs side by side too.

One more thing I'm ticked about. The Rims already have a chip in the paint. Don't know how that happend so soon.

http://img.photobucket.com/albums/v4...5/IMG_0079.jpg
http://img.photobucket.com/albums/v4...5/IMG_0104.jpg
http://img.photobucket.com/albums/v4...5/IMG_0096.jpg
http://img.photobucket.com/albums/v4...5/IMG_0088.jpg

Could you post a close up picture of your wheel and tire. I would like to see how the P265/35/20 tire profile looks. I was planning on going with P255/35/20 in front and P275 in the rear until I found the P275/35/20 cost twice as much. I figure the P265/35/20 would be a good compromise. I just want a little taller tire in the rear to close up the fender gap to make the car look even with the Eibach pro-kit and keep the tires tuck slightly in. Hopefully the 40mm offset will do that. I have a 89 Mustang with staggered tires and even though they are very wide they sit in under the fenders giving it a tubbed look. I hope to get that look with my 07 Mustang.
Old 4/12/07, 01:00 PM
  #563  
V6 Member
 
aremann2's Avatar
 
Join Date: November 12, 2004
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Does anyone know if 255/55/18 tires will work on all four corners? Salesman said the 55 would be too tall and would hit the strut.
Old 4/12/07, 03:28 PM
  #564  
GT Member
 
revlefty's Avatar
 
Join Date: June 25, 2006
Posts: 138
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by aremann2
Does anyone know if 255/55/18 tires will work on all four corners? Salesman said the 55 would be too tall and would hit the strut.
It would be pretty ugly even if it did.
Old 4/12/07, 04:11 PM
  #565  
V6 Member
 
aremann2's Avatar
 
Join Date: November 12, 2004
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by revlefty
It would be pretty ugly even if it did.
I don't really like the low profile tire(skinny sidewall) I want to cut down on the gap between the top of the tire and the fender well opening, with out having to lower the car. I figured I could do it with a little more tire. I have lowered the rear end , to make the car set level. A little more sidewall might improve the ride also .
Old 4/13/07, 09:54 PM
  #566  
Cobra Member
 
Deric's Avatar
 
Join Date: September 11, 2006
Posts: 1,210
Likes: 0
Received 1 Like on 1 Post
This is what I'm doing but powdercoating them black. Sexiest wheel for the S197 Mustang IMO

Originally Posted by fivestring45
Well Here we go...
20" Razors with Bright Silver Finish. (Matches the IUP package Perfectly)
Tires are 265/35/20 Nitto 555's
Car will be lowered shortly with Steeda Ultra Lites

Also I ordered the Shelby Center caps but they were plastic while the AMR ones are machined Alluminum. Also, they are a completly different design and I don't see how they should even fit. I'm returning them. I've included the pic of the 2 different designs side by side too.

One more thing I'm ticked about. The Rims already have a chip in the paint. Don't know how that happend so soon.

http://img.photobucket.com/albums/v4...5/IMG_0079.jpg
http://img.photobucket.com/albums/v4...5/IMG_0104.jpg
http://img.photobucket.com/albums/v4...5/IMG_0096.jpg
http://img.photobucket.com/albums/v4...5/IMG_0088.jpg
Old 4/14/07, 12:04 PM
  #567  
Member
 
DarkProphet's Avatar
 
Join Date: December 10, 2005
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
I know this is a photoshop car. But are there wheels that look like this anywhere around?


http://i56.photobucket.com/albums/g1...ammer_rear.jpg
Old 4/14/07, 12:13 PM
  #568  
Member
 
RajunPony06's Avatar
 
Join Date: July 11, 2006
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
I like the Saleen Styled Chrome 20's
Old 4/15/07, 01:05 PM
  #569  
GT Member
 
fivestring45's Avatar
 
Join Date: February 5, 2006
Posts: 127
Likes: 0
Received 0 Likes on 0 Posts
Hope this helps a little better. If you need another angle or something let me know. I just got that camera and enjoy playing with it.
http://img.photobucket.com/albums/v4...5/IMG_0090.jpg
http://img.photobucket.com/albums/v4...5/IMG_0091.jpg
http://img.photobucket.com/albums/v4...5/IMG_0092.jpg
http://img.photobucket.com/albums/v4...5/IMG_0093.jpg
http://img.photobucket.com/albums/v4...5/IMG_0100.jpg
http://img.photobucket.com/albums/v4...5/IMG_0098.jpg



Originally Posted by mustangdaren
Could you post a close up picture of your wheel and tire. I would like to see how the P265/35/20 tire profile looks. I was planning on going with P255/35/20 in front and P275 in the rear until I found the P275/35/20 cost twice as much. I figure the P265/35/20 would be a good compromise. I just want a little taller tire in the rear to close up the fender gap to make the car look even with the Eibach pro-kit and keep the tires tuck slightly in. Hopefully the 40mm offset will do that. I have a 89 Mustang with staggered tires and even though they are very wide they sit in under the fenders giving it a tubbed look. I hope to get that look with my 07 Mustang.
Old 4/16/07, 06:15 PM
  #570  
Bullitt Member
 
mustangdaren's Avatar
 
Join Date: May 21, 2005
Location: Hildebran, NC
Posts: 259
Likes: 0
Received 0 Likes on 0 Posts
Thanks for the pics. I finally got to see what they look like in person with P265 tires at Atlanta FFW this past weekend. As soon as the 40mm offset is available that is what is going on the car. I also got to see the new Roush Roadster 20" wheels which are sweet but at $900 a wheel they can keep them.
Old 4/16/07, 09:25 PM
  #571  
Mach 1 Member
 
project_v6's Avatar
 
Join Date: March 30, 2007
Location: Dallas TX
Posts: 644
Likes: 0
Received 0 Likes on 0 Posts
My wheels!



Old 4/16/07, 09:31 PM
  #572  
Mach 1 Member
 
project_v6's Avatar
 
Join Date: March 30, 2007
Location: Dallas TX
Posts: 644
Likes: 0
Received 0 Likes on 0 Posts
Very Nice RIMS

One of the best looking wheels I've seen!

Pretty expensive but worth it!


Originally Posted by StangFreak




Wedsport TC005's, 18X9 in the front and 18X10 in the rear. Tires are BFG KDW 2's, 255/40/18 front and 295/35/18 rear. Car is lowered on Eibach Pro Kit springs and Tokico D Spec shocks/struts.
Old 4/17/07, 09:25 AM
  #573  
GT Member
 
fivestring45's Avatar
 
Join Date: February 5, 2006
Posts: 127
Likes: 0
Received 0 Likes on 0 Posts
No problem. I'm glad you got to see them in person. The pics don't really do them justice.

Originally Posted by mustangdaren
Thanks for the pics. I finally got to see what they look like in person with P265 tires at Atlanta FFW this past weekend. As soon as the 40mm offset is available that is what is going on the car. I also got to see the new Roush Roadster 20" wheels which are sweet but at $900 a wheel they can keep them.
Old 4/17/07, 10:28 AM
  #574  
Member
 
hoff5884's Avatar
 
Join Date: May 12, 2006
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Since this is the main thread for posting wheels I wanted to repost my pictures here for reference purposes. I think these are some of the best looking wheels on the market for the mustang. I got mine at www.wheelreplicas.com

Here is my 2006 Tungsten Mustang with Chrome FR500 wheels (18x9) and 255/45/18 Nitto 555 Tires

I have lowered the car with an Eibach Pro-kit and painted the calipers.
Attached Thumbnails SHOW US YOUR WHEELS 2005-2009 S-197 GEN 1 Only-display_pict2.jpg   SHOW US YOUR WHEELS 2005-2009 S-197 GEN 1 Only-display_rep2.jpg   SHOW US YOUR WHEELS 2005-2009 S-197 GEN 1 Only-display_rep3.jpg   SHOW US YOUR WHEELS 2005-2009 S-197 GEN 1 Only-wheel_1.jpg   SHOW US YOUR WHEELS 2005-2009 S-197 GEN 1 Only-display_pict3.jpg  

Old 4/17/07, 10:47 AM
  #575  
GT Member
 
Dirty Sanchez's Avatar
 
Join Date: August 9, 2006
Posts: 170
Likes: 0
Received 0 Likes on 0 Posts
Still a work in progress, have a lot of stuff left to do to it. Some pics after a bath last night


http://www.members.***.net/dirty_5anchez/STANG12.JPG
http://www.members.***.net/dirty_5anchez/STANG13.JPG
http://www.members.***.net/dirty_5anchez/STANG14.JPG
http://www.members.***.net/dirty_5anchez/STANG15.JPG
http://www.members.***.net/dirty_5anchez/STANG17.JPG
http://www.members.***.net/dirty_5anchez/STANG18.JPG

future exterior mods:
Remove antenna, chrome Mustang letters on rear, mold the rear ducktail to the body, and paint the billet grills black. After that, the exterior will be done for a while.
Old 4/17/07, 10:53 AM
  #576  
Cobra Member
 
2005RedGT's Avatar
 
Join Date: November 13, 2004
Posts: 1,431
Likes: 0
Received 0 Likes on 0 Posts
What model and size tires are those ?
-Bryan

Originally Posted by Dirty Sanchez
Still a work in progress, have a lot of stuff left to do to it. Some pics after a bath last night


http://www.members.***.net/dirty_5anchez/STANG12.JPG
http://www.members.***.net/dirty_5anchez/STANG13.JPG
http://www.members.***.net/dirty_5anchez/STANG14.JPG
http://www.members.***.net/dirty_5anchez/STANG15.JPG
http://www.members.***.net/dirty_5anchez/STANG17.JPG
http://www.members.***.net/dirty_5anchez/STANG18.JPG

future exterior mods:
Remove antenna, chrome Mustang letters on rear, mold the rear ducktail to the body, and paint the billet grills black. After that, the exterior will be done for a while.
Old 4/17/07, 11:01 AM
  #577  
GT Member
 
Dirty Sanchez's Avatar
 
Join Date: August 9, 2006
Posts: 170
Likes: 0
Received 0 Likes on 0 Posts
Kuhmo MX 275/45/18
Old 4/17/07, 11:49 PM
  #578  
Bullitt Member
 
CannonBaller's Avatar
 
Join Date: November 29, 2004
Posts: 352
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Dirty Sanchez
Still a work in progress, have a lot of stuff left to do to it. Some pics after a bath last night
http://www.members.***.net/dirty_5anchez/STANG12.JPG
http://www.members.***.net/dirty_5anchez/STANG13.JPG
http://www.members.***.net/dirty_5anchez/STANG14.JPG
http://www.members.***.net/dirty_5anchez/STANG15.JPG
http://www.members.***.net/dirty_5anchez/STANG17.JPG
http://www.members.***.net/dirty_5anchez/STANG18.JPG

future exterior mods:
Remove antenna, chrome Mustang letters on rear, mold the rear ducktail to the body, and paint the billet grills black. After that, the exterior will be done for a while.

What kind of Rims are those? i like the look, they fit just perfect.
Do they come in Chrome or Silver?
and how much?
Old 4/19/07, 01:56 PM
  #579  
V6 Member
 
aremann2's Avatar
 
Join Date: November 12, 2004
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
[attach][attach]Attachment 24441[/attach][/attach]
Attached Thumbnails SHOW US YOUR WHEELS 2005-2009 S-197 GEN 1 Only-mini-p1070868.jpg   SHOW US YOUR WHEELS 2005-2009 S-197 GEN 1 Only-mini-p1070871.jpg   SHOW US YOUR WHEELS 2005-2009 S-197 GEN 1 Only-mini-p1070869.jpg  
Old 4/19/07, 07:21 PM
  #580  
Mach 1 Member
 
StangFreak's Avatar
 
Join Date: May 5, 2005
Posts: 640
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by project_v6
One of the best looking wheels I've seen!

Pretty expensive but worth it!

Thanks Man!!!


Quick Reply: SHOW US YOUR WHEELS 2005-2009 S-197 GEN 1 Only



All times are GMT -6. The time now is 06:26 AM.