Grabber Shelby conversion completed
Thread Starter
Bullitt Member
Joined: October 13, 2004
Posts: 222
Likes: 3
Originally Posted by Shelbywanabe
Rj.... I would love to see a pic of your horn relocation if it's not too much trouble, K/C said my Front bumper has been shipped yesterday, so i think i'm going to trial fit my hood today..... bumper should be here any day now.....
Did you relocate the horn so you do not see it thru the grill? Is that what you mean? Also as far as the pins go, sounds like a good idea, however what did you use for the harness connector? I read they were different (shelby fogs vs GT fog connectors) please explain, Thanks! this info will be quite useful soon!
Did you relocate the horn so you do not see it thru the grill? Is that what you mean? Also as far as the pins go, sounds like a good idea, however what did you use for the harness connector? I read they were different (shelby fogs vs GT fog connectors) please explain, Thanks! this info will be quite useful soon!
Yes on the horn. Just looked like it was in the way. You could just use some heat shrink over the pins if you cant find a connector that will work or make work
Legacy TMS Member
Joined: February 24, 2006
Posts: 59
Likes: 14
From: Alberta
Well I picked up the bumper cover on Tuesday. Should be at the painters in the next couple of days. I believe I have all the parts and probably some extra I don't need (tried to get a hotsheet by email back on Sept 2, but no response, so I guess I'll have to go at it myself.) Pretty exciting project that I've wanted to do since I saw the first Cobra.
Thread Starter
Bullitt Member
Joined: October 13, 2004
Posts: 222
Likes: 3
Bullitt Member
Joined: August 9, 2006
Posts: 228
Likes: 0
RJ, is your car lowered? I have all my stuff loaded up and it's off to paint tomorrow.......However after test fitting the front bumper, (to see how well it cleared the horn move) Good tip by the way, worked like a charm......... I found that the chin spoiler is going to be L O W !!!
It looks as if it will be ok, but man it's getting a little close for comfort.... So, i was wondering if your car was lowered and how much? Thanks!
It looks as if it will be ok, but man it's getting a little close for comfort.... So, i was wondering if your car was lowered and how much? Thanks!
GT Member
Joined: June 25, 2006
Posts: 138
Likes: 0
RJ, is your car lowered? I have all my stuff loaded up and it's off to paint tomorrow.......However after test fitting the front bumper, (to see how well it cleared the horn move) Good tip by the way, worked like a charm......... I found that the chin spoiler is going to be L O W !!!
It looks as if it will be ok, but man it's getting a little close for comfort.... So, i was wondering if your car was lowered and how much? Thanks!
It looks as if it will be ok, but man it's getting a little close for comfort.... So, i was wondering if your car was lowered and how much? Thanks!
Bullitt Member
Joined: August 9, 2006
Posts: 228
Likes: 0
RJ..... have you had any problems w/ the horn and the fit of your front cover? I noticed that your cover is pressed in a little in your photo..... Does this give any vibrations or such? I moved mine like yours and after test fitting the cover and gently bending the bracket a little to where the bottom horn just touches the radiator cover still touches the front bumper a bit..... any problems or regrets? I love the look of not seeing it but wondering if i should be concerned of how tight a fit it is?
Thread Starter
Bullitt Member
Joined: October 13, 2004
Posts: 222
Likes: 3
RJ..... have you had any problems w/ the horn and the fit of your front cover? I noticed that your cover is pressed in a little in your photo..... Does this give any vibrations or such? I moved mine like yours and after test fitting the cover and gently bending the bracket a little to where the bottom horn just touches the radiator cover still touches the front bumper a bit..... any problems or regrets? I love the look of not seeing it but wondering if i should be concerned of how tight a fit it is?
not sure what you mean about pressed in? I had to cut the bracket that the horns are attached to. I think that might be why yours wont fit. Mine is not touching the bumber or radiator cover.
Bullitt Member
Joined: August 9, 2006
Posts: 228
Likes: 0
In your second picture the bottom horn nut seems to be pressing against the bumper cover..... that's pretty much how mine is, I had already cut the bracket so i know what you mean..... The cover will fit it just presses up against the cover a little tho...... see what i mean in your 2nd pic?? well the pics did not re-post so i'm refering to post #41
Thread Starter
Bullitt Member
Joined: October 13, 2004
Posts: 222
Likes: 3
In your second picture the bottom horn nut seems to be pressing against the bumper cover..... that's pretty much how mine is, I had already cut the bracket so i know what you mean..... The cover will fit it just presses up against the cover a little tho...... see what i mean in your 2nd pic?? well the pics did not re-post so i'm refering to post #41
Yes I get it. Try and use a spacer between the horn bracket and the mounting surface on the car. I had the same problem untill I used a spacer in between there. It will get it over that ridge
Bullitt Member
Joined: August 9, 2006
Posts: 228
Likes: 0
Did you change it after you posted that picture tho??? Or is it just me? Looks like the buper is just barely pressing in on that pic....???? Thanks, RJ Car looks awesomw BTW! I was thinking Paint your Calipers Black now!
Thread Starter
Bullitt Member
Joined: October 13, 2004
Posts: 222
Likes: 3
it is almost touching. Getting gt500 brembos and they are black
