Any pics of the Splash Guards?
Here are some pics from my GT/CS I got mine on ebay for a bid of $12.50 plus $5.05 shipping............They work pretty good at keeping the rear quarter panels clean and they really don't look to bad since they are pretty low profile. They were easy to install I used a rachet wrench with a short phillps bit and had them on in 30 mins.Just took a black paint stick and touched up head of screws when I was done......
http://forums.bradbarnett.net/attach...1&d=1168807085
http://forums.bradbarnett.net/attach...1&d=1168807120
http://forums.bradbarnett.net/attach...1&d=1168807120
http://forums.bradbarnett.net/attach...1&d=1168807085
http://forums.bradbarnett.net/attach...1&d=1168807120
http://forums.bradbarnett.net/attach...1&d=1168807120
Splash Guards
07GTCS - Wish you had pictures. Do they give good coverage. My rear quarters/rockers are getting ate up. Do they use existing screws?Anyone doing anything on the front. Bottom of the doors getting ate up also.
They install in minutes using the existing screws. You can do it without removing the tire with a very smal philips screwdriver. Other option is to remove the tire to be able to use a regular screwdriver. I'll take some close-ups when I get home.
They look good. I have bought a pair and they should arrive soon. If I were to use one of those snubby screw driver, will I be able to do this without removing the tire? I heard other people used a small 1/4 rachet with a phillips head drive. I suppose that would work too. But for $20 and 10 minutes it will save the quarter panels. Thanks for the pics.
Here are some pics from my GT/CS I got mine on ebay for a bid of $12.50 plus $5.05 shipping............They work pretty good at keeping the rear quarter panels clean and they really don't look to bad since they are pretty low profile. They were easy to install I used a rachet wrench with a short phillps bit and had them on in 30 mins.Just took a black paint stick and touched up head of screws when I was done......
http://forums.bradbarnett.net/attach...1&d=1168807085
http://forums.bradbarnett.net/attach...1&d=1168807120
http://forums.bradbarnett.net/attach...1&d=1168807120
http://forums.bradbarnett.net/attach...1&d=1168807085
http://forums.bradbarnett.net/attach...1&d=1168807120
http://forums.bradbarnett.net/attach...1&d=1168807120
Are these the ones?
http://cgi.ebay.com/ebaymotors/2005-...spagenameZWDVW
http://cgi.ebay.com/ebaymotors/2005-...spagenameZWDVW
Here are some pics from my GT/CS I got mine on ebay for a bid of $12.50 plus $5.05 shipping............They work pretty good at keeping the rear quarter panels clean and they really don't look to bad since they are pretty low profile. They were easy to install I used a rachet wrench with a short phillps bit and had them on in 30 mins.Just took a black paint stick and touched up head of screws when I was done......
http://forums.bradbarnett.net/attach...1&d=1168807085
http://forums.bradbarnett.net/attach...1&d=1168807120
http://forums.bradbarnett.net/attach...1&d=1168807120
http://forums.bradbarnett.net/attach...1&d=1168807085
http://forums.bradbarnett.net/attach...1&d=1168807120
http://forums.bradbarnett.net/attach...1&d=1168807120
http://motors.search.ebay.com/_W0QQsassZ1dovehunter
These are the ones that I bought, they look the same as the ones you posted. If you bid and stay on top of it, you may be able to get them cheaper, I used the "Buy Now".
These are the ones that I bought, they look the same as the ones you posted. If you bid and stay on top of it, you may be able to get them cheaper, I used the "Buy Now".
Here are the part numbers from Ford. They will fit CS and GT500. Numbers are for a right and left.
The part #’s 7R3Z16A550AA & 7R3Z16A550AB are listed for mustang Shebly GT 500 and <ST1
</ST1
they are $5.47 each
The part #’s 7R3Z16A550AA & 7R3Z16A550AB are listed for mustang Shebly GT 500 and <ST1
</ST1
they are $5.47 each
Here are some pics from my GT/CS I got mine on ebay for a bid of $12.50 plus $5.05 shipping............They work pretty good at keeping the rear quarter panels clean and they really don't look to bad since they are pretty low profile. They were easy to install I used a rachet wrench with a short phillps bit and had them on in 30 mins.Just took a black paint stick and touched up head of screws when I was done......
http://forums.bradbarnett.net/attach...1&d=1168807085
http://forums.bradbarnett.net/attach...1&d=1168807120
http://forums.bradbarnett.net/attach...1&d=1168807120
http://forums.bradbarnett.net/attach...1&d=1168807085
http://forums.bradbarnett.net/attach...1&d=1168807120
http://forums.bradbarnett.net/attach...1&d=1168807120



