Ok... I know you guys have been waiting for this! I shot a couple of short video clips last night! They are short because the car goes to 80 MPH pretty dang fast!!

Couple of comments:

1) The 1st clip is from a 55MPH roll in 4th gear (just below 3000 RPM). You can see the boost gauge (left most gauge) jump right up as soon as I touch the gas. When the car downshifts it shoots right up to almost 10PSI... Before I know it i was at 80+! YIKES!!!

2) I couldn't spring for a wideband A/F guage so we stuck one of the silly ones that works off the stock o2 sensors... While you can't use it to tune the car it does give you an indication that everything is pretty much ok... while you are just cruising a long is should be bouncing between red (lean) and green (rich) which it does... When I nail it you'll notice it peg green and stays there! That is actually what you want to see... if it doesn't do that then I know something isn't right! So yes, a wideband would be 100 times better but at least what I do have is better than nothing!

3) The 2nd and 3rd clip are just from a stop... I did not try to launch! These were simply foot off the brake and then press down on the gas! LOL!

4)Crusing along at 60 MPH in 4th gear puts me just under 3000 RPM... the perfect spot to bounce on some poor unexpecting V8 that was fooled my single exhaust! BWAHAHAHAHA!!!!

Ok... here is the video!

http://videos.streetfire.net/video/7...19a362839d.htm

 

very cool, the only problem is your car is making such a name for itself, pretty soon the element of surprise will be lost!

 

LOL, this is a very good point.

About the vid, Wow!!! Holy crap. That is just plain sick man. I love it. I actually like that AF meter....kinda like "kit". LOL. Wow John, Congrats!!!

 

And she sounds very bad *** man. I mean, she just roars. I love it. Well done.

 

That's the CDC gauge pod right? How did you get it to look exactly like the dash material?

 

hard to tell from the video but it doesn't look "exactly" like the dash... but it's close enough that it's not distracting... so it blends in pretty good! I will try and get some hi-res photos this weekend!

Scott from MRT painted/textured it! (www.mrt-direct.com). If you want one and have it look like mine you need to call them and ask them to make it look like the one in the MRT Interceptor... (or now The Mistress! LOL)

 

Simply awesome!

 

Very nice sounds good to!

I always look forward to your vids even short they good.

 

Yeah, it reminds me of the Cylons in the old Battlestar Galactica...

Awesome video, John!! The surprise factor is much easier for you with that single exhaust.. With the way my car looks and sounds, I am not sure if anyone knows it is a 6.

Look forward to seeing what you are going to do with her...

 

 

That sounds pretty **** mean! I want that gauge pod.

 

http://mrt-direct.com/2005/Pages/gauges.php

Tell them you want it the same finish at The Interceptor (and now The Mistress!) LOL!

oh and thanks guys!

 

I see the boost gets right up there.I hope my s-trim on my 05 gt spools up that quick.

 

yeah... it was very surprising... I'm thinking the 4.10's help! LOL!

 

LOL!! Thats insane Scrming!!! Oh man, they dont call you the king for nothing!! WOW!!

You have been to the edge and back, now even better and stronger!! My new nick name for you is the "Bionic Man!"

We can rebuild the Mistress, Better, Stronger, Faster!! LOL!

Rock'on Scrming, you are the man!! Congrats, good show, and May God Bless!

 

I am running the 2.62 pulley on my car.. About 360RWHP with +2 degrees on the stock Vortech tune, pushing through a custom intercooler setup I designed..

The V2 is no joke.. You wanna get jiggy wit it! Better get a Vortech V2! LOL!

 

oh i am just waiting on all the parts and then it's on,go time

 

Let me be the first to welcome you aboard Team Vortech! I am sure you will place the Team at the top of the TMS timeslip when you run 10's.. You do realize this will happen once the V2 is in place? LOL!!

WOW! It appears Team Vortech is growing rather rapidly! Bring us home a 10.xx ET JP!!

 

Thanks! I also need to get a good drive-by video... and some good photo's of whole car... in the mean time here's the engine bay!

 

Very Nice Bionic Man! Email this guy, and get some yellow 90 degree silicon elbows!... That will finish off the engine bay pretty nicely!! LOL!!

http://cgi.ebay.com/Yellow-silicone-...QQcmdZViewItem