Eibachs & GT Bullit Rims !
Thread Starter
Member
Joined: January 17, 2005
Posts: 40
Likes: 0
Eibach Pros went on today... All I can say is WOW, easy install and this thing handles awesome with GT Rims and Tires. Front dropped 1.6" and the rear is 1.4" so a slight foward rake looks great.
I also aquired 2 GT Mufflers to put together a dual system but have not got the over axle pipes yet. So I dropped the factory V-6 Muffler and what do you know the passenger side GT Muffler bolts right up !! I knew the mounts were the same but I wasn't sure on the inlet pipe. It is the same size going in. The biggest difference is the inside pipe, the V-6 is like 1.5" the GT is 2.5" so it is much less restrictive. Which makes sense, Ford spent quite alot of $$ on the GT exhaust, this is why most GT guys have bolted on Magnaflow etc and don't see much HP increase, but do get more sound. The exhaust note is much deeper and seat of the pants meter says it does pull slightly harder. I will do some more with the SCT after I get the 4.10s and T-Loc installed this weekend !
I also aquired 2 GT Mufflers to put together a dual system but have not got the over axle pipes yet. So I dropped the factory V-6 Muffler and what do you know the passenger side GT Muffler bolts right up !! I knew the mounts were the same but I wasn't sure on the inlet pipe. It is the same size going in. The biggest difference is the inside pipe, the V-6 is like 1.5" the GT is 2.5" so it is much less restrictive. Which makes sense, Ford spent quite alot of $$ on the GT exhaust, this is why most GT guys have bolted on Magnaflow etc and don't see much HP increase, but do get more sound. The exhaust note is much deeper and seat of the pants meter says it does pull slightly harder. I will do some more with the SCT after I get the 4.10s and T-Loc installed this weekend !
Thread Starter
Member
Joined: January 17, 2005
Posts: 40
Likes: 0
Originally posted by future9er24@February 17, 2005, 12:38 AM
wow i think im using this smiley for its intended purpose. am i the first one to do that? :gasp:
wow i think im using this smiley for its intended purpose. am i the first one to do that? :gasp:
Tasca Super Boss 429 Member
Joined: May 18, 2004
Posts: 3,657
Likes: 2
From: San Antonio, TX
Originally posted by pittperson@February 17, 2005, 7:15 AM
If you just right click on the pretty red x (if thats what you see), copy the image source and paste it into the address bar.
If you just right click on the pretty red x (if thats what you see), copy the image source and paste it into the address bar.
Edit: Nevermind, I was referring to the link you posted.
GT Member
Joined: February 3, 2004
Posts: 154
Likes: 0
Originally posted by mm49@February 17, 2005, 8:09 AM
So no one can see the PIC? How come I can see it with no issues ?? I see it as an attached photo to my write-up.... Ummm ? Maybe its the hosting
So no one can see the PIC? How come I can see it with no issues ?? I see it as an attached photo to my write-up.... Ummm ? Maybe its the hosting
GT Member
Joined: February 3, 2004
Posts: 154
Likes: 0
Originally posted by mm49@February 17, 2005, 11:36 AM
Re did the Picture off Modular Ford site. Can it be seen now ? I can see it with no problem.
Re did the Picture off Modular Ford site. Can it be seen now ? I can see it with no problem.
