88mm Turbo 3v with stock computer up and running
8/5/08, 08:45 AM
#1
Bullitt Member
Thread Starter
Join Date: October 11, 2007
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
88mm Turbo 3v with stock computer up and running
Just wanted to let you guys know Vinny Barber's 2005 Mustang GT with a 88mm Turbo is up and running. It's been a long and involved project and things are going well. On 18 psi it made 913 rwhp through a powerglide.
For details on the build
http://forums.modulardepot.com/showthread.php?t=108307
Here is a video of startup idle:
http://www.modulardepotvideos.com/video/6401
and a dyno pull
http://www.modulardepotvideos.com/video/6720
We ran it at the track on 14 psi to shake it down. Went 6.31 short shifting it. The 18 psi graph above is just for starters. Plans are to turn it up as much as the turbo will allow. Will probably be making some full passes on higher boost (18 psi) in a couple of weeks.
For details on the build
http://forums.modulardepot.com/showthread.php?t=108307
Here is a video of startup idle:
http://www.modulardepotvideos.com/video/6401
and a dyno pull
http://www.modulardepotvideos.com/video/6720
We ran it at the track on 14 psi to shake it down. Went 6.31 short shifting it. The 18 psi graph above is just for starters. Plans are to turn it up as much as the turbo will allow. Will probably be making some full passes on higher boost (18 psi) in a couple of weeks.
8/7/08, 11:28 PM
#13
Bullitt Member
Join Date: February 11, 2008
Location: CINCY, OHIO/NAPLES,FLA
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
wow i saw that car in md shop the other day and was wondering what it can do.. ****, i'm floored.
gregB was saying mark you should build one of these during winter
plattner01
gregB was saying mark you should build one of these during winter
plattner01
Thread
Thread Starter
Forum
Replies
Last Post