$600 for labor and two days to install them
#1
Team Mustang Source
Thread Starter
Join Date: January 18, 2005
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
$600 for labor and two days to install them
After much deliberation, I decided my next mods are going to be FRPP 410's and the axle girdle. Just for fun, I called the dealership where I bought the car (Varsity Ford in Ann Arbor, MI) for pricing and approximate time needed. Much to my surprise, I was told $600 for labor and "about" two days to do the job. What a load of crap! After reading TacoBill's write-up, I have a target of $400 to $500 and up to 5 hours for the work. Can anyone out there suggest a shop in Michigan, Ohio, or Indiana that can the work for me?
Jon
Jon
#4
Team Mustang Source
Thread Starter
Join Date: January 18, 2005
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
#5
When I last checked Brenspeed did not do gear installs. I was quoted 3 1/2 - 4 hours labor for gears. I tell you what it really isn't that hard. A couple of my club friends and myself did 2 cars in one day.
#6
I was thinking the same thing, about 3/4 hours-so a tick under $400 at the most, even from a dealer. Any mechanic at a Ford dealer who's been around for first gen expys and 02-04 explorers should be a jedi master working on rear diffs.
#7
Legacy TMS Member
Hey man Brenspeed probably won't do your gears, but if you don't mind driving that far....... about an hour south of Brenspeed there is a shop in my home town (Decatur, In) that is a local mom & pop shop and they've done gears in 3 of my 'stangs for about $300 in labor each time..... and NO GEAR whine. PM me if you want the details..... the shop is HiWay Service and is a good, family owned general repair shop.
#9
Lidio from Alternative Auto did mine, very reasonable, and a quality job
http://www.alternativeauto.com/
http://www.alternativeauto.com/
#11
#12
http://www.modulardepot.com
This is where I had my gears installed. Great shop, and they are located in Newport Kentucky. (Right across the river from Cincinnati) About $600 installed.
This is where I had my gears installed. Great shop, and they are located in Newport Kentucky. (Right across the river from Cincinnati) About $600 installed.
Thread
Thread Starter
Forum
Replies
Last Post
Diode Dynamics
Vendor Showcase
3
6/12/18 03:26 PM