2005-2009 Mustang Information on The S197 {Gen1}

Get A New Kb For Almost Nothing!!

Thread Tools
 
Search this Thread
 
Old Jun 12, 2007 | 09:13 PM
  #1  
ChevyKiller's Avatar
Thread Starter
GT Member
 
Joined: February 19, 2006
Posts: 135
Likes: 0
Thumbs up Get A New Kb For Almost Nothing!!

I have a great deal for someone if they can qualify...

What I need is a newer model 07 manual GT competely stock or very close to stock. Exhaust and Cai & tune are okay cause I can take it off temporarily.

The later model 07's have some slight changes in the emissions system and Kenne Bell is going to use the car to pass CA state emmissions board. To find out if you qualify, simply look under the hood by the hood latch and look for the numbers above the Evap numbers. If the last 2 numbers end in 88 or BB, then it is a later model 07 and it is the one we need.

We will have the car for 3 weeks and it will not be driven on the street. However, you will receive the car back with a brand new 2.4 or 2.6 kit (your choice) and custom dyno tuned by KB for practically nothing!!

A coupe or vert is okay. Since this will be taking place at the KB facility in Rancho Cucamonga, Ca. - it is obviously preferred to have someone local.

If your car meets the requirements and you are looking for a brand new tuned KB for practically nothing, then PM me with your information and I will call you. I want to reiterate that we will need the car for 3 weeks.

Thanks,

Mark
Reply
Old Jun 13, 2007 | 09:05 AM
  #2  
slipnotovk's Avatar
Mach 1 Member
 
Joined: June 28, 2006
Posts: 780
Likes: 0
From: Staten Island, NY
if i wasnt on the other side of the friggin country id say take mine, but yea..........distance blows
Reply
Old Jun 13, 2007 | 10:14 AM
  #3  
DarkFireGT's Avatar
Cobra R Member
 
Joined: September 26, 2006
Posts: 2,019
Likes: 5
From: East Moline, IL
I would've shipped mine down there. But alas, no BB/88.
Reply
Old Jun 13, 2007 | 12:13 PM
  #4  
302svt's Avatar
Cobra Member
 
Joined: October 26, 2006
Posts: 1,030
Likes: 0
I wish I was closer. I would do it in a heartbeat.
Reply
Old Jun 13, 2007 | 12:39 PM
  #5  
Crossss's Avatar
Member
 
Joined: January 9, 2007
Posts: 14
Likes: 0
Let me know if you ever need to do this for a GT500
Reply
Old Jun 13, 2007 | 01:20 PM
  #6  
ballistic1976's Avatar
Member
 
Joined: November 28, 2006
Posts: 21
Likes: 0
Alas...mine says AA at the end. Man I would have done this in a heart beat, I am in southern cali too.
Reply
Old Jun 13, 2007 | 02:01 PM
  #7  
kcurley's Avatar
Member
 
Joined: August 23, 2006
Posts: 8
Likes: 0
Wow, I've got BB at the end of my evap family, and that offer is very tempting.
The only problem is I work for CARB and I sit right next to the aftermarket cert. guys.
Might be conflict of interest!
Reply
Old Jun 13, 2007 | 03:06 PM
  #8  
Webba's Avatar
Mach 1 Member
 
Joined: March 23, 2005
Posts: 903
Likes: 0
Kev you work for CARB and drive a gas guzzler....you are already in it waist deep why not go all the way in??!
Reply
Old Jun 13, 2007 | 06:27 PM
  #9  
kcurley's Avatar
Member
 
Joined: August 23, 2006
Posts: 8
Likes: 0
Originally Posted by Webba
Kev you work for CARB and drive a gas guzzler....you are already in it waist deep why not go all the way in??!

Haha, yeah everybody's been saying that, but 18mpg isn't really that bad. At least I drive a LEV2 vehicle rather than an old one.
Reply
Old Jun 13, 2007 | 07:59 PM
  #10  
mrkabc's Avatar
Legacy TMS Member
 
Joined: November 13, 2005
Posts: 2,193
Likes: 46
AWWWWWW...

I work in Rancho Cucamonga, does that count?!?!
Reply
Old Jun 13, 2007 | 09:02 PM
  #11  
Johny5ltr's Avatar
Member
 
Joined: December 6, 2004
Posts: 42
Likes: 0
Thumbs up

Originally Posted by kcurley
Wow, I've got BB at the end of my evap family, and that offer is very tempting.
The only problem is I work for CARB and I sit right next to the aftermarket cert. guys.
Might be conflict of interest!

IF ANYTHING......YOUR OUR MAN ON THE INSIDE!!!!!...lol
Reply
Old Jun 13, 2007 | 10:06 PM
  #12  
DynamicmustangGT's Avatar
Cobra R Member
 
Joined: January 12, 2007
Posts: 1,875
Likes: 0
mines an 05 in CT but its got an o/r x pipe worth a try
Reply
Old Jun 14, 2007 | 12:42 AM
  #13  
RaGsHoCkEy88's Avatar
FR500 Member
 
Joined: June 12, 2004
Posts: 3,071
Likes: 0
wow....id do it in a heartbeat but i have an 05
Reply
Old Jun 14, 2007 | 09:38 AM
  #14  
jayguy's Avatar
Team Mustang Source Legacy Member
 
Joined: September 2, 2004
Posts: 1,679
Likes: 5
From: Las Vegas
This is a very tempting offer. I just ran out to check my car, but I'm not sure I see the numbers you're talking about. If they're on the underside of the hood, that could be why, my hood's in the garage at home.

I don't know if I'd qualify though, I got mine early in the model year (I think it was build on June 16 2006).

I'll still check tonight, but I'm not laying any bets down on making it.
Reply
Old Jun 14, 2007 | 01:10 PM
  #15  
ChevyKiller's Avatar
Thread Starter
GT Member
 
Joined: February 19, 2006
Posts: 135
Likes: 0
Thanks guys for all the repsonses. I've got someone and a back-up so I don't need anymore.

I really appreciate the responses. I forgot to mention that the car needs 3500 miles on it and a few haven't racked up that much yet cause it is such a late production model.

Thanks again for all your responses and if I come accross any more deals (that MY car doesn't qualify for..lol) I'll post them here. The good news is KB's should soon be carb legall!!

Mark
Reply
Old Jun 14, 2007 | 02:21 PM
  #16  
jayguy's Avatar
Team Mustang Source Legacy Member
 
Joined: September 2, 2004
Posts: 1,679
Likes: 5
From: Las Vegas
Dang! There goes my chances.
Reply
Old Jun 16, 2007 | 11:18 AM
  #17  
ChevyKiller's Avatar
Thread Starter
GT Member
 
Joined: February 19, 2006
Posts: 135
Likes: 0
Still open. The backup guy obviously couldn't read (wrong numbers) and the the guy Eddy who was scheduled has a Shelby and that's a no go.

So KB still needs someone. They will take a manual or auto but it needs to have at least 3K miles on it and NO ENGINE OR EXHAUST MODS.

Pretty much springs are about all that's okay.

PM me if you know someone.

Thanks,

Mark
Reply




All times are GMT -6. The time now is 12:52 PM.