GEAR SWAP LABOR
3/31/05, 12:53 PM
#1
GT Member
Thread Starter
Join Date: October 16, 2004
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Finally getting around to to getting my 3.55s installed. The local dealership is telling me it will take around 5-6 hours to do the swap. at 70 bucks an hour that is not exactly cheap. I am also having them replace all the bearings and stuff for good measure and change out the speedo gear. I tend to trust these guys becasuse i worked there for 4 years and they are even still giving me an employee discount on the parts. What do you guys think?
3/31/05, 01:05 PM
#2
It takes normally about 3 hours for someone who knows what tehy are doing. I would talk to a local speed shop in your area. Where are you located, maybe we could recommend some.
3/31/05, 03:07 PM
#3
GT Member
Thread Starter
Join Date: October 16, 2004
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
[quote=Scothew,March 31, 2005, 2:08 PM]
It takes normally about 3 hours for someone who knows what tehy are doing. I would talk to a local speed shop in your area. Where are you located, maybe we could recommend some.
[/quote
I live in Georgetown KY.
It takes normally about 3 hours for someone who knows what tehy are doing. I would talk to a local speed shop in your area. Where are you located, maybe we could recommend some.
[/quote
I live in Georgetown KY.
3/31/05, 05:36 PM
#5
GT Member
Thread Starter
Join Date: October 16, 2004
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Scothew@March 31, 2005, 5:59 PM
I dont know of any in that area, but i'll keep my eyes open.
I dont know of any in that area, but i'll keep my eyes open.
3/31/05, 08:56 PM
#6
Member
Join Date: December 20, 2004
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
i had my exhaust put in at the same time as my gears. they gave me 50 dollars an hour on the exhaust ( took an hour and a half) and just told me it would be 250 to do the gears. i said ok. they had it form 8am til just after 5 and they were done with it.
4/1/05, 12:22 PM
#7
Mach 1 Member
Join Date: May 23, 2004
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by aaron95stang@March 31, 2005, 1:56 PM
I am also having them replace all the bearings and stuff for good measure and change out the speedo gear.
I am also having them replace all the bearings and stuff for good measure and change out the speedo gear.
Thread
Thread Starter
Forum
Replies
Last Post
Rando
2010-2014 Mustang
8
8/25/21 11:12 AM