Possible Boss M-plate spotted
5/11/10, 05:20 PM
#1
GTR Member
Thread Starter
Possible Boss M-plate spotted
On the way home today, I found this in my sub at a local Ford employee's house. I've seen a large assortment of cars there over the years, some even in camo, but this one sparked my interest. From the pics, I can clearly see it's a GT, without side badges, but it does have the SVT PP wheels and the 4" exhaust, but still has GT badging on the rear. Also notice the different finish on the front wheels. I didn't get a shot of the front or the interior, but I will hopefully take a closer peek later tonight. Here's the pics from the cam phone I took earlier:
5/11/10, 05:49 PM
#7
Legacy TMS Member
5/11/10, 05:59 PM
#8
GTR Member
Thread Starter
Ok, I just did another pass and walked up to take a look at the front. No Cobra badges on it at all. No center caps either. It had the GT Brembos on it, and the hood was standard fare as well. The front, on the other hand, was a little different. Billet grille with the GT/CS lower diffuser, but NO FOGS. Also, the splitter on the front is more pronounced than the CS examples I've seen.
I did glance at the interior, but it looked like a standard cloth GT interior, and had the big kill button on the top of the dash. Couldn't tell much more than that because the rain was all over the windows and didn't want to wipe them off. Definitely looked very good, from what I'd seen. Here's a pic of the front:
I did glance at the interior, but it looked like a standard cloth GT interior, and had the big kill button on the top of the dash. Couldn't tell much more than that because the rain was all over the windows and didn't want to wipe them off. Definitely looked very good, from what I'd seen. Here's a pic of the front:
5/11/10, 06:06 PM
#9
Cobra R Member
Join Date: March 12, 2004
Location: Orange County, CA
Posts: 1,560
Likes: 0
Received 0 Likes
on
0 Posts
Knock on his door and introduce yourself 
He'll either spill the beans or tell you to GTFO.
FWIW one of the Ford employees I spoke with at an owner's event said his company car was a Mustang GT and could basically add anything he wanted to it (free of charge, of course). It had a big brake kit, GT500 wheels, and some other goodies. This might just be an example of the "custom" ride he's driving. The front fascia is interesting though.
He'll either spill the beans or tell you to GTFO.FWIW one of the Ford employees I spoke with at an owner's event said his company car was a Mustang GT and could basically add anything he wanted to it (free of charge, of course). It had a big brake kit, GT500 wheels, and some other goodies. This might just be an example of the "custom" ride he's driving. The front fascia is interesting though.
Last edited by Adam; 5/11/10 at 06:09 PM.
5/11/10, 06:10 PM
#11
GTR Member
Thread Starter
I really like the stance with the SVTPP wheels. Car looks great. Also, that front splitter looks good as well, I just wish the fogs were back in it, or it had HIDs.
I did think about knocking on the door, but didn't bother. If he had been outside, I would have stopped to chat with him and find out more. I don't want to bother someone with questions that they might not be able to answer.
I did think about knocking on the door, but didn't bother. If he had been outside, I would have stopped to chat with him and find out more. I don't want to bother someone with questions that they might not be able to answer.
5/11/10, 06:13 PM
#12
Legacy TMS Member
That chin spoiler/splitter looks pretty aggressive (kinda looks like a GT500 splitter installed on the CS fascia). I'm pretty sure it's safe to say we are looking at a Boss mule! So the front wheels were PP wheels too, but in black?
Last edited by laserred38; 5/11/10 at 06:14 PM.
5/11/10, 06:45 PM
#13
Cobra R Member
Join Date: August 9, 2007
Location: Philadelphia
Posts: 1,839
Likes: 0
Received 0 Likes
on
0 Posts
5/11/10, 07:32 PM
#15
Team Mustang Source
5/11/10, 07:51 PM
#16
Cobra Member
Join Date: January 12, 2006
Location: Houston, Texas
Posts: 1,163
Likes: 0
Received 0 Likes
on
0 Posts
It easily fits the visual description that a 2011 Boss 302 prototype would have.... No badges or stripes, but unique things like the BOSS 302R lower valance(aka GT/CS lower valance w/ no fogs), front splitter, rear spoiler, and tri-bar pony faux gas cap. It's hard to see but it appears to also have a GT500/GT/CS/302R rear diffuser.
All you need to do to make it a Boss 302 visually is to add a black hood stripe, black BOSS 302 hockey stick side stripe, black billet grille with centered tri-bar pony, and paint the rear spoiler black. I hope the SVT PP wheels come on the Boss 302 if they make it because they look awesome.
Btw guys, I can almost completely confirm that the front splitter is the Boss 302R one. If you look at the highlighted area in this picture of the Boss 302R, you will see that the 302R has the same front splitter as the mysterious car pictured above(I brightened the picture so you can see the splitter better).
Boss 302R:
Mysterious Boss 302R esquie 2010+ Mustang above:
All you need to do to make it a Boss 302 visually is to add a black hood stripe, black BOSS 302 hockey stick side stripe, black billet grille with centered tri-bar pony, and paint the rear spoiler black. I hope the SVT PP wheels come on the Boss 302 if they make it because they look awesome.
Btw guys, I can almost completely confirm that the front splitter is the Boss 302R one. If you look at the highlighted area in this picture of the Boss 302R, you will see that the 302R has the same front splitter as the mysterious car pictured above(I brightened the picture so you can see the splitter better
).Boss 302R:
Mysterious Boss 302R esquie 2010+ Mustang above:
5/11/10, 08:09 PM
#18
Cobra R Member
Join Date: August 9, 2007
Location: Philadelphia
Posts: 1,839
Likes: 0
Received 0 Likes
on
0 Posts
5/11/10, 08:12 PM
#19
Cobra Member
Join Date: November 30, 2009
Location: South
Posts: 1,121
Likes: 0
Received 0 Likes
on
0 Posts
