Fox Performance Timeslip Thread
#1
Post *****
Thread Starter
Since Galaxie started at 1/4 mile performance thread for the 05+ guys I thought I would start one for the Fox guys and gals.
I'm only going to have two (2) Top 10 threads. One for 1/4 and one for 1/8 (for guys that don't have a 1/4 track.) And each list is an all encompassing list (N/A. SC, Nitrous, Turbo, Modular, Windsor). Let's play with the honor system. Post your timeslip if you have the means to scan, and time must be posted in this section to get on the list. Please post times from ONLY 2006. You have to run it THIS YEAR in order to qualify.
1/4 Time - MPH
1. 8.50 @ 129 - Mercracing
2. 15.328 @ 94.80 - Cirric
3. 12.63 @ 107 - mustangfan1990
4.
5.
6.
7.
8.
9.
10.
1/8 Time - MPH
1. 6.33 @ 110 - angcobra
2. 8.03 @ 87 - mustangfan1990
3.
4.
5.
6.
7.
8.
9.
10.
I'm only going to have two (2) Top 10 threads. One for 1/4 and one for 1/8 (for guys that don't have a 1/4 track.) And each list is an all encompassing list (N/A. SC, Nitrous, Turbo, Modular, Windsor). Let's play with the honor system. Post your timeslip if you have the means to scan, and time must be posted in this section to get on the list. Please post times from ONLY 2006. You have to run it THIS YEAR in order to qualify.
1/4 Time - MPH
1. 8.50 @ 129 - Mercracing
2. 15.328 @ 94.80 - Cirric
3. 12.63 @ 107 - mustangfan1990
4.
5.
6.
7.
8.
9.
10.
1/8 Time - MPH
1. 6.33 @ 110 - angcobra
2. 8.03 @ 87 - mustangfan1990
3.
4.
5.
6.
7.
8.
9.
10.
#6
Well I have plenty of timeslips but I dont have a way to get it on here, but you dont have to put it up if you dont want to but in the 1/8 my 90 gt ran 8.03 at 87 mph and in the 1/4 ran 12.63 at 107 mph.
#7
My 88 coupe ran 7.70 1/8 @ 88 mph and 12.40 @ 108. All motor. Stock bottom end, Edelbrock heads, F303 cam, Edelbrock performer intake, 3.27 gears, stock T5, full body and fill interior.
I'm building me another fox that should be in the 10's in the 1/4 or better. It's a 91 with a stroked 351 and 2 stages. When it gets finished I will post times. right now it hasn't went but one time down the track and the shifter was messed up and I could not hardly get it to shift. It went a 12.00 @ 128 mph all motor and I kept haveing to let off to get it to shift. That time sucked bad. Can wait till I get it right and go back.
I'm building me another fox that should be in the 10's in the 1/4 or better. It's a 91 with a stroked 351 and 2 stages. When it gets finished I will post times. right now it hasn't went but one time down the track and the shifter was messed up and I could not hardly get it to shift. It went a 12.00 @ 128 mph all motor and I kept haveing to let off to get it to shift. That time sucked bad. Can wait till I get it right and go back.
The following users liked this post:
Shawn Brown (6/17/17)
#18
Mach 1 Member
My 1990 mustang lx convertable automatic 5.0 (7up car)
Ran 15.15 @ 90.8 mph
All stock, stock timing, spare tire and jack, stock mufflers, stock catalytic converters, air box ext. 87 octain fuel.
Only mod 3.55 gears!
And it's heavy weighed at the track 3,450 lbs. without driver!
Ran 15.15 @ 90.8 mph
All stock, stock timing, spare tire and jack, stock mufflers, stock catalytic converters, air box ext. 87 octain fuel.
Only mod 3.55 gears!
And it's heavy weighed at the track 3,450 lbs. without driver!
#19
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
2015 - 2023 MUSTANG
0
9/8/15 10:45 AM