Agent 47 Retro Mirror install
4/7/08, 02:21 AM
#1
Shelby GT500 Member
Thread Starter
Join Date: November 22, 2006
Location: Planet Earth
Posts: 2,932
Likes: 0
Received 0 Likes
on
0 Posts
Agent 47 Retro Mirror install
Luis and I installed our A47 mirrors on the second time around it only took us 25-30 minutes! With the right tools it's very easy. These instructions doesn't replace Agent47 procedures. It's just our version visually, we hope it helps you guys!
Last edited by JedCranium; 4/7/08 at 01:06 PM.
4/7/08, 04:14 AM
#2
Mach 1 Member
Join Date: November 7, 2007
Location: Brigantine, NJ
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
Excellent writeup. 
Always appreciate someone taking the time to do these.
On a side note, I've seen quite a few tutorials that use those plastic pry tools. Where do you find them? I have quite a few things I'd like to use one for.
Thanks again, looks like I have to find another excuse to give my wife for a new mod!!!
Always appreciate someone taking the time to do these.On a side note, I've seen quite a few tutorials that use those plastic pry tools. Where do you find them? I have quite a few things I'd like to use one for.
Thanks again, looks like I have to find another excuse to give my wife for a new mod!!!
4/7/08, 12:44 PM
#10
Shelby GT500 Member
Thread Starter
Join Date: November 22, 2006
Location: Planet Earth
Posts: 2,932
Likes: 0
Received 0 Likes
on
0 Posts
Great time at Stillen!
Once agian thank you hope to see more of Stillen down the road.
Jed
Last edited by JedCranium; 4/7/08 at 08:09 PM.
4/7/08, 12:51 PM
#11
Authorized Advertiser
Join Date: September 6, 2006
Posts: 876
Likes: 0
Received 0 Likes
on
0 Posts
Page great job on the Stillen event this weekend. Thanks agian for arranging the A47 Mirrors for pick-up that day, Luis and I really appreciat that. I'll post the pictures tonight in AutoFocus and I'll send you a DVD-R of the originals.
Once agian thank you hope to see more of Stillen down the road.
Jed
Once agian thank you hope to see more of Stillen down the road.
Jed
Thanks much. Hope everyone enjoyed their time here. You WILL See more of Stillen for sure
Hey - are you going to the next Sunday in Chatsworth - B&M? Am planning on taking the silver StillenStang up there
Page
Last edited by StillenMustang07; 4/7/08 at 12:55 PM.
4/7/08, 12:55 PM
#12
Shelby GT500 Member
Thread Starter
Join Date: November 22, 2006
Location: Planet Earth
Posts: 2,932
Likes: 0
Received 0 Likes
on
0 Posts
Excellent writeup. Always appreciate someone taking the time to do these.
On a side note, I've seen quite a few tutorials that use those plastic pry tools. Where do you find them? I have quite a few things I'd like to use one for.
Thanks again, looks like I have to find another excuse to give my wife for a new mod!!!
Always appreciate someone taking the time to do these.On a side note, I've seen quite a few tutorials that use those plastic pry tools. Where do you find them? I have quite a few things I'd like to use one for.
Thanks again, looks like I have to find another excuse to give my wife for a new mod!!!
Jed
4/7/08, 12:59 PM
#14
Shelby GT500 Member
Thread Starter
Join Date: November 22, 2006
Location: Planet Earth
Posts: 2,932
Likes: 0
Received 0 Likes
on
0 Posts
Jed
Last edited by JedCranium; 4/9/08 at 01:24 AM.
4/7/08, 04:06 PM
#16
Authorized Advertiser
Join Date: September 6, 2006
Posts: 876
Likes: 0
Received 0 Likes
on
0 Posts
Don't know if I can make that event I need to travel to Arizona this upcoming weekend. I'll see if I can work it in but it's not looking good right now. Page those AP brakes our on my mind can this be install on a Saturady? I'm thinking 4 piston version front for now.
Jed
Jed
Jed
Jed
MIGHT be able to do a Saturday install on them. I know the install shop is open one Saturday a month. Its about a 2 hour job. You would need to check the fitment also (before you purchase the brakes). Here is a link to the fitment guide - http://www.stillen.com/product_files/AP4400~profile.pdf
Just make sure when you print it out that you have Page Scaling set to NONE. To verify, there is a 1" x 1" reference square on the fitment guide.
BTW - these are STILL on special at $1965.37
Give me a call (866-278-8287 x134) or shoot me an e-mail (PageN@Stillen.com) if I can be of any help.
Thanks
Page
4/8/08, 10:15 AM
#17
GTR Member
Awesome writeup..I want these but not sure what sections I would paint. I think Leo had the same dilemma as well. Page,I couldn't find mirrors on your site
Page,I couldn't find mirrors on your site
Last edited by Boltzman; 4/8/08 at 10:21 AM.
4/8/08, 12:54 PM
#18
Authorized Advertiser
Join Date: September 6, 2006
Posts: 876
Likes: 0
Received 0 Likes
on
0 Posts
They arent on the site - the web guys are having a hard time keeping up. Have them in stock and ready to ship $249.
Give me a call if I can be of help - 866-278-8287 x134
Thanks
Page
7/18/08, 07:52 AM
#20
Jed- Added this to the Hotlinks 'How-To' thread.
