2005-2008 Mustang Cluster Plug Diagram Also Needle Calibration
#1
2005-2008 Mustang Cluster Plug Diagram Also Needle Calibration
Does anyone have a Instrument Cluster Plug Diagram(Schematic) for a 2005-2008 ford Mustang.
I am trying to power up a cluster to bench test it but need the plug Diagram.
Also Needle
I am trying to power up a cluster to bench test it but need the plug Diagram.
Also Needle
Last edited by 05stangkc; 12/5/23 at 02:42 PM.
The following users liked this post:
Mustang1234 (11/25/18)
The following 2 users liked this post by garyb900:
Buckshot Barry (11/23/18),
Mustang1234 (11/25/18)
#9
Hi Mustang1234,
I replaced cluster motors on my 05 GT and would like to power the cluster on bench to calibration the needles before reinstalling. How did you setup for powering cluster on bench?.....just 12vdc to pin #3 and ground to pin#2 ?
I replaced cluster motors on my 05 GT and would like to power the cluster on bench to calibration the needles before reinstalling. How did you setup for powering cluster on bench?.....just 12vdc to pin #3 and ground to pin#2 ?
#10
cluster needle calibration
...after dickin' with adjustments per a couple other videos, this guy has it. Although this video is for F150, the same process works on Mustangs. It worked for me immediately....I wasted hrs trying to do what others described.
The following users liked this post:
Newnamejohn (1/21/20)
Thread
Thread Starter
Forum
Replies
Last Post
05stangkc
05-09 My Color, IUP & Gt-500 Cluster, Gauge Face Topics
10
1/21/24 10:51 AM