Couple new mods coming
Getting TB ported to 84mm at maxbore.com and getting a stand alone clutch reservoir.
Getting 84mm port job with low profile slim throttle blade shaft. 134$ Shelby iso clutch reservoir with motul rbf600 fluid coming as well. This will max out my current setup without going headers. Will get it dynoed after while. Made 395whp and 351wtq stock with aed tune. Will return to same dyno Current mods are: Airaid intake 47# injectors E85 flex fuel tune MRT off road h pipe Roush axleback Exedy mach 500 clutch Exedy lightweight billet steel flywheel Ported tb to 84mm |
Originally Posted by tek302
Getting TB ported to 84mm at maxbore.com and getting a stand alone clutch reservoir.
Getting 84mm port job with low profile slim throttle blade shaft. 134$ Shelby iso clutch reservoir with motul rbf600 fluid coming as well. This will max out my current setup without going headers. Will get it dynoed after while. Made 395whp and 351wtq stock with aed tune. Will return to same dyno Current mods are: Airaid intake 47# injectors E85 flex fuel tune MRT off road h pipe Roush axleback Exedy mach 500 clutch Exedy lightweight billet steel flywheel Ported tb to 84mm |
Originally Posted by laserred38
(Post 6970825)
What kind of dyno?
|
Originally Posted by tek302
Dyno jet, giant in ground cylinders
|
Originally Posted by laserred38
(Post 6970874)
Wow DJ's usually read on the high side. With just my Solo catback and high flow cats, with AED dyno tune, I put down 401/391 on their dyno. Those are the only mods. Prior to the high flow cats, our baseline was like 369/370 with just the catback and no tune.
Im hoping to hit 430whp next visit |
Originally Posted by tek302
395whp was stock besides a tune.
Im hoping to hit 430whp next visit |
Originally Posted by laserred38
(Post 6970903)
Ohhh ok that makes more sense haha. I have Stainless Power LTs waiting to go on too. I'm hoping to be about there, or 420ish after the retune. Keeping the HF cats though. Don't want it ridiculously loud.
|
Originally Posted by tek302
Good luck!
|
Originally Posted by laserred38
(Post 6971018)
Likewise ;) can't wait to see your next round of mods. I just placed my order with Hypermotive for all the BMR rear end stuff (minus the watts link, which I really wanted, but they don't recommend with the air bag suspension).
frpp boss 302 springs bmr rear lower arms bmr rear lower relocation brackets bmr adjustable pandhard bar roush upper arm |
Getting boss dynoed Saturday! Throttle body comes in today. Will post pics
|
Car made 438whp and 391wtq
https://cimg4.ibsrv.net/gimg/themust...c8ccc930d9.jpg |
Originally Posted by tek302
Car made 438whp and 391wtq
|
Nice!
Gained about 40HP from the porting! Did you need a new tune as well? |
Originally Posted by Stage_3
(Post 6973073)
Nice!
Gained about 40HP from the porting! Did you need a new tune as well? No tune needed for the ported throttlebody |
All times are GMT -6. The time now is 09:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands