Originally Posted by Overboost
(Post 6004088)
I picked the splitter up for $120 from www.newfordparts.com
|
Originally Posted by jacostang
(Post 6004098)
It only goes to 2010, what part number did you use to order?
I started a thread specific to it here: https://themustangsource.com/f802/or...-today-491131/ |
You Rock, thanks so much!
|
Originally Posted by jacostang
(Post 6004101)
You Rock, thanks so much!
I'll continue to scour that accessory brochure for any more "new for 2012 MY" items that we might want. |
Sounds Good!
|
Originally Posted by Overboost
(Post 6004088)
I picked the splitter up for $120 from www.newfordparts.com
|
Street Boss 302 Intake
This isn't from the FRPP catalog, but I saw this today about the Street Boss 302 Intake being made available.
http://www.mustangevolution.com/201101266567/ You would think they would remove the Boss 302 ID from it. |
Steve, thanks to you I went in and we looked up the parts for that number and the whole Boss front end came up! Got the grill, tri bar pony and splitter!! Thanks so much! It was very easy once those part numbers were available...
|
Originally Posted by jacostang
Steve, thanks to you I went in and we looked up the parts for that number and the whole Boss front end came up! Got the grill, tri bar pony and splitter!! Thanks so much! It was very easy once those part numbers were available...
|
Originally Posted by Overboost
(Post 6004779)
Can you post part numbers and pricing for the grill?
Grill CR3Z-8200-BAPTM $374.92 Retail, my cost was $281.19 Pony 8R3Z-16228-A $69.28 Retail, My cost was $53.71 He said he could knock another $25 off when I bought them together. |
Originally Posted by jacostang
(Post 6005476)
Ok here is the Boss Grill and Running Pony, the part for the pony states "insert"
Grill CR3Z-8200-BAPTM $374.92 Retail, my cost was $281.19 Pony 8R3Z-16228-A $69.28 Retail, My cost was $53.71 He said he could knock another $25 off when I bought them together. Post pics of your setup once you get it on. Should complete the look real nice on your pace car. EDIT - One other part that I'm looking for a part number on is the blue coil covers. BOI has them for $125, but we might be able to find them cheaper through a parts vendor. |
Oh I know but I really want mine to look like the original Pace Car, soooo Gonna have to bite the bullet on this one...
|
Originally Posted by jacostang
(Post 6005484)
O know but I really want mine to look like the original Pace Car, soooo Gonna have to bite the bullet of this one...
I did some hunting, and found the part number base for the coil covers. If I had to guess, the part would be something like CR3Z-6P068-??. There are four listed, two are $36 and the other two are $52. |
Originally Posted by jacostang
(Post 6005476)
Ok here is the Boss Grill and Running Pony, the part for the pony states "insert"
Grill CR3Z-8200-BAPTM $374.92 Retail, my cost was $281.19 Pony 8R3Z-16228-A $69.28 Retail, My cost was $53.71 He said he could knock another $25 off when I bought them together. |
|
The gauge and LS splitter links are now active. The gauge pod is even more than I expected at $1,399. Yikes.
http://www.fordracingparts.com/parts...KeyField=12414 |
Yikes is right! Holy cow!
|
It includes the harness. I wonder how difficult it will be routing it to the existing sensors, for a home install.
|
I think the most difficult part will be drilling the holes in the correct spot. Hopefully a template is included.
|
Originally Posted by LeeU
(Post 5998105)
I hope the rear seat delete makes it to market, I need that bad for my Roush.
LeeU http://i251.photobucket.com/albums/g...Boss302_34.jpg "<580374 - Battery Cover - Boss Racing Package" !!! Hmmm, I wonder, what else didn't get into the final spec? |
All times are GMT -6. The time now is 11:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands