'13-14 Cluster into '10-12 car (with TrackApps) retrofit
#2183
Bullitt Member
Join Date: November 14, 2008
Location: Loooziana
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
#2184
Mach 1 Member
#2185
Bullitt Member
Join Date: November 14, 2008
Location: Loooziana
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
#2186
Mach 1 Member
Ok... one new fact... on the 2010's
I got a new ABS module today... and TrackApps in my Garage...
Here is the thing:
This time i connected the EPAS and did all the steps required to install the ABS. Before doing anything i read all DTC's:
Vin mismatch
Not initialized
Incompatible Software
Interestingly before i did anything, TrackApps was fully functional.
Did the IVS, PMI etc, everything successful (including a note that my PCM VIN is incorrect) but that Software Mismatch stays (well, kinda expected, after all the conversations with Matt)...
But TrackApps works.
Me, like, let's go for a test drive... put everything together and guess what:
No more TrackApps... well i had to disconnect the EPAS.... as it was lying around outside of the car, just wired up...
So no EPAS = no TrackApps
LEXiiON
I got a new ABS module today... and TrackApps in my Garage...
Here is the thing:
This time i connected the EPAS and did all the steps required to install the ABS. Before doing anything i read all DTC's:
Vin mismatch
Not initialized
Incompatible Software
Interestingly before i did anything, TrackApps was fully functional.
Did the IVS, PMI etc, everything successful (including a note that my PCM VIN is incorrect) but that Software Mismatch stays (well, kinda expected, after all the conversations with Matt)...
But TrackApps works.
Me, like, let's go for a test drive... put everything together and guess what:
No more TrackApps... well i had to disconnect the EPAS.... as it was lying around outside of the car, just wired up...
So no EPAS = no TrackApps
LEXiiON
#2188
Legacy TMS Member
Can we get a stickied post on page one that shows total cost and parts to buy to get this to work for quick reference? 100 pages is a ton to read through lol
#2190
GT Member
I have a 13 auto shifter assembly for sale if anyone needs one for an 11-12 auto swap. Was purchased new and only used for a few months. pm me for price if interested.
Thanks
Thanks
#2191
Bullitt Member
however i too lost my compass.
i dont NEED it, but.... anyone know how to get it back?
#2192
Bullitt Member
so my car is a base, i just put the premium cluster in from a premium car last week, its amazing and i love it.
I noticed my cluster mph doesnt match what my gps says, im off by 2 miles per hour. The cluster will say for example 70mph but the gps says im doing 68.
Old cluster was spot on with the gps. Would it matter that the cluster came from a car running the track pack 19s?
using IDS and the VCM it says axle/tire size stuff is all what its always been 3.31 and 235/50/18 like it should.
I noticed my cluster mph doesnt match what my gps says, im off by 2 miles per hour. The cluster will say for example 70mph but the gps says im doing 68.
Old cluster was spot on with the gps. Would it matter that the cluster came from a car running the track pack 19s?
using IDS and the VCM it says axle/tire size stuff is all what its always been 3.31 and 235/50/18 like it should.
#2193
Bullitt Member
so my car is a base, i just put the premium cluster in from a premium car last week, its amazing and i love it.
I noticed my cluster mph doesnt match what my gps says, im off by 2 miles per hour. The cluster will say for example 70mph but the gps says im doing 68.
Old cluster was spot on with the gps. Would it matter that the cluster came from a car running the track pack 19s?
using IDS and the VCM it says axle/tire size stuff is all what its always been 3.31 and 235/50/18 like it should.
I noticed my cluster mph doesnt match what my gps says, im off by 2 miles per hour. The cluster will say for example 70mph but the gps says im doing 68.
Old cluster was spot on with the gps. Would it matter that the cluster came from a car running the track pack 19s?
using IDS and the VCM it says axle/tire size stuff is all what its always been 3.31 and 235/50/18 like it should.
Okay, so maybe some folks might need to do this if they are having the same issue.
Cluster came from premium with 19s and went into a base with 18s.
even tho when i open IDS and go into axle ratio/tire size it still said it was set for 18s - it wasnt.
So i programmed it for 19s then reprogrammed it for 18s. now my speedometer is 100% accurate when verifying with my gps.
YAY!
#2194
GT Member
Found this site today while I was looking for Navi stuff. Unfortunately the Navi stuff is discontinued, but they have clusters.
$473 with a $300 core.... I'm not sure if it's track apps or not
$473 with a $300 core.... I'm not sure if it's track apps or not
#2195
GT Member
I guess it helps if I put the link in...lol
http://parts.autonationfordwhitebearlake.com/ford/mustang/er3z10849ea/2014-year/gt-trim/5-0l-v8-gas-engine/electrical-cat/instruments-and-gauges-scat/?part_name=instrument-cluster
#2196
GT Member
http://parts.autonationfordwhitebearlake.com/ford/mustang/dr3z10849ca/2013-year/boss-302-trim/5-0l-v8-gas-engine/electrical-cat/instruments-and-gauges-scat/?part_name=instrument-cluster
13 boss gauge
450
13 boss gauge
450
#2197
Bullitt Member
its trackapps if its got an LCD screen on it, they will ask for a vin number and mileage when you order. if they dont, then they will call asking for that info. I just went thru this process myself. gave them a vin from a car with the LCD screen.
#2198
Mach 1 Member
Hey guys, Im back and I have decided to finally tie this loose end after finishing my 13 rear end w/GT500 Axle-backs and I have just put in the new abs module and PMI it with my VCM II but my ABS Light is still flashing and advance track is still not working maybe I missed something but I also tried as-built for the ABS (Worked I used code 117A which is for a v6 premium 2013) I tried as-built for BCM-B but it would fail to reprogram and then I tried SJB which failed to program as well. any help would be appreciated I'm also going to try to get in contact with Zeroaviation again, and yes I am on a 2012 V6 so far I have all my gauges working as-well as track apps (Ran a 3.2 sec 0-30 for a test on track apps) I just have the pesky warning lights on my dash but other than that everything is working great.
#2199
Mach 1 Member
Hey guys, Im back and I have decided to finally tie this loose end after finishing my 13 rear end w/GT500 Axle-backs and I have just put in the new abs module and PMI it with my VCM II but my ABS Light is still flashing and advance track is still not working maybe I missed something but I also tried as-built for the ABS (Worked I used code 117A which is for a v6 premium 2013) I tried as-built for BCM-B but it would fail to reprogram and then I tried SJB which failed to program as well. any help would be appreciated I'm also going to try to get in contact with Zeroaviation again, and yes I am on a 2012 V6 so far I have all my gauges working as-well as track apps (Ran a 3.2 sec 0-30 for a test on track apps) I just have the pesky warning lights on my dash but other than that everything is working great.
LEXiiON