The Mustang Source - Ford Mustang Forums
Page 1 of 18
1
2
3
4
5
6
7
8
9
10
11
Last »
Show 100 post(s) from this thread on one page

The Mustang Source - Ford Mustang Forums (https://themustangsource.com/forums/)
-   '10-14 Exterior Modifications (https://themustangsource.com/forums/f802/)
-   -   Raxiom working on 2013 style tail lights with AM? (https://themustangsource.com/forums/f802/raxiom-working-2013-style-tail-lights-am-511071/)

BOWTIE-X 7/9/12 09:38 AM
Raxiom working on 2013 style tail lights with AM?
 
Is it true that raxiom and American muscle is working on a 2013 style LED rear tail lights for 10-12 mustang and due out in August?

Care to confirm AM?

gruiz_06 7/9/12 10:20 AM
I hope so, that would be great!

youngstang90 7/9/12 10:24 AM
2 Attachment(s)
If not, I'm working on printing pre-cut vinyl....I did the template and everything. Prices will be out soon.

BOWTIE-X 7/9/12 10:31 AM
That is sweet! So is just vinyl covers right? Depending on the price I like to go with this option until raxiom come out with the actual lights. I'm in, so please keep us updated!:)

youngstang90 7/9/12 01:15 PM
Originally Posted by BOWTIE-X
That is sweet! So is just vinyl covers right? Depending on the price I like to go with this option until raxiom come out with the actual lights. I'm in, so please keep us updated!:)
Yeah, that's what I'm looking at. As long as its cost-effective, I'm going start producing them for everyone.

I should know something by the end of the week.

BOWTIE-X 7/9/12 01:33 PM
is the vinyl going to be dark enough so no light would penetrate?

wannabe 7/9/12 01:40 PM
Originally Posted by BOWTIE-X (Post 6393784)
Is it true that raxiom and American muscle is working on a 2013 style LED rear tail lights for 10-12 mustang and due out in August?

Care to confirm AM?
Not even ten minutes ago I ordered the $45 smoke tint for mine. Very nearly ordered the Raxioms they currently have for the 10-12... but I don't like that bottom backup light.

AMWill 7/9/12 02:00 PM
Hey guys,

I'm pushing Raxiom to make a tail light like that for you! That vinyl really does look cool though, I'll let you know if I hear anything at all!

Shane

CaptDistraction 7/9/12 03:04 PM
I think its a potential hot product if they make a quality piece.

BOWTIE-X 7/9/12 05:56 PM
Originally Posted by AMShaneLesky (Post 6393963)
Hey guys,

I'm pushing Raxiom to make a tail light like that for you! That vinyl really does look cool though, I'll let you know if I hear anything at all!

Shane
Thank you Shane, so is still not written in stone. Regardless, if someone can come out with a 2013 tail light to fit the 10-12, I think it's definitely going to be a no brainer that is probably going to be one of the hottest selling lights for pre 2013. I have to admit, I really liked the Camaro so I got one, but I always had my eyes on the return of 5.0, but when I seen the 2013 with those new black LED tails, I said I had to get rid of my Camaro and get the 13 5.0. Even tho I came home without what I originally went in the ford dealership to get, I am still happy and don't second doubt my choice, but if 2013 style rear tails does become available, I will be the happiest man in the world LOL!:)

SCHMOKN 7/9/12 06:11 PM
Would be a hot seller for sure!

Studly_Studright 7/9/12 07:05 PM
I'd buy em

youngstang90 7/9/12 08:42 PM
Originally Posted by BOWTIE-X
is the vinyl going to be dark enough so no light would penetrate?
Yes, there won't be any light penetrating. What's on my car is plasti-dip. I just wanted to see an idea of how it would look before I invested in the vinyl.

BOWTIE-X 7/10/12 12:48 PM
young stang, make it happen bro. I would buy em in a heart beat myself, and being nothing but a similar tail light tint, it should be really cost effective. This would be a great option for someone that really like the 2013 tail light style and can't wait until teh actual lights come out. If it was available now, I would take a pair NOW! LOL!

mustangmikeFL 7/10/12 02:02 PM
Originally Posted by BOWTIE-X
young stang, make it happen bro. I would buy em in a heart beat myself, and being nothing but a similar tail light tint, it should be really cost effective. This would be a great option for someone that really like the 2013 tail light style and can't wait until teh actual lights come out. If it was available now, I would take a pair NOW! LOL!
Ditto, PayPal standing by...

Nocturnal'14 7/10/12 03:47 PM
I'd buy a set of vinyl overlays until the Raxiom/AM set comes out. Try to do a set in CarbonFiber Di-noc and I'd pay more!

May I suggest that when you have them made you make it cover the reverse light a little more! The 2013's reverse lights are smaller than the 2012's.

youngstang90 7/10/12 04:44 PM
I went today....I'm going to start producing these and planning on having them ready by next week. Price as of right now looks like somewhere between $40-$80 for the set depending on what grade vinyl I use. I'm also looking into making combo kits consisting of the taillight overlays, and the trim pieces as these overlays won't cover the very edge just like the tint doesn't cover the sides. If I do that then obviously the cost would be quite a bit more, but you'd be getting both products.

Originally Posted by Uin2it
I'd buy a set of vinyl overlays until the Raxiom/AM set comes out. Try to do a set in CarbonFiber Di-noc and I'd pay more!

May I suggest that when you have them made you make it cover the reverse light a little more! The 2013's reverse lights are smaller than the 2012's.
I will look into cost for CarbonFiber. It shouldn't be difficult at all.
The vinyls will be right on the edge of the reverse lights. The pics that y'all have seen are of the 'prototype lights'. I've made adjustments to the final product. Thank you for the suggestion. :)

I will be starting a thread to get everyone who is interested to let me know. I'm thinking I'll just request PMs and make my list of who wants them for now. Eventually I will probably make a website in order to take in orders.

BOWTIE-X 7/10/12 05:59 PM
Originally Posted by youngstang90 (Post 6394827)
I went today....I'm going to start producing these and planning on having them ready by next week. Price as of right now looks like somewhere between $40-$80 for the set depending on what grade vinyl I use. I'm also looking into making combo kits consisting of the taillight overlays, and the trim pieces as these overlays won't cover the very edge just like the tint doesn't cover the sides. If I do that then obviously the cost would be quite a bit more, but you'd be getting both products.



I will look into cost for CarbonFiber. It shouldn't be difficult at all.
The vinyls will be right on the edge of the reverse lights. The pics that y'all have seen are of the 'prototype lights'. I've made adjustments to the final product. Thank you for the suggestion. :)

I will be starting a thread to get everyone who is interested to let me know. I'm thinking I'll just request PMs and make my list of who wants them for now. Eventually I will probably make a website in order to take in orders.
I'm in. Carbon fiber seem interesting. Would love to see how it would look, but for now, I'm in for all black. PM me whenever you are ready to start rolling these out please.:salute:

UOP Shadow 7/10/12 06:27 PM
Looks to me like the 2013 OEM tail light will be a direct swap with the 2010 / 2011. Has anybody tried the OEM swap?

BOWTIE-X 7/10/12 06:39 PM
Not quite. The shape is a little different. It will leave a gap in the bottom. If you look down a few posts there's actually a guy that already did the swap, but you will see what the problem is, but everything else far as connection is all direct PnP.


All times are GMT -6. The time now is 02:00 AM.
Page 1 of 18
1
2
3
4
5
6
7
8
9
10
11
Last »
Show 100 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands