Added factory camera spoiler to Base Model
 

Just wanted to show off my new camera spoiler that I added to my Base Model 2013.

http://superawesomepix.smugmug.com/C..._135312-XL.jpg

http://superawesomepix.smugmug.com/C...MG_0433-XL.jpg

http://superawesomepix.smugmug.com/C...MG_0432-XL.jpg



I'm not writing a "How To:", but I will summarize how I wired it up.



Wire harness from spoiler

http://i124.photobucket.com/albums/p...112_160611.jpg

Ford pigtail

Attachment 190793

As forum member Siber Express says "The colors change in the Harness you plug into.
The Blue wire does not get used, the Red, 2 whites and 2 blacks do.
If you go by the 11 wiring diagram the red will be #1.
Here is the replacement plug you need "

Switched 12v = RED Pin 1
Ground = BLACK Pin 3
Video Sheild = BARE SHEILD - pin 4 (also black and i didnt connect it to anything)
VIDEO + WH-GN = WHITE Pin 6
Video - BN-VT = WHITE pin 7

As for the mirror wiring:

Switched 12v - fuse tap to fuse 41

http://superawesomepix.smugmug.com/C...ustang%202.jpg

green reverse wire from mirror was tapped into the BCM B module (body control module B) which is in the trunk behind the carpet on the right side behind where the factory amplifier would be if I had one. its a black 24pin connector. Pin 5 which is GREEN for the 2013s is the left reverse lamp signal.

Camera power 12v - fuse tapped to fuse 29. As for the ground wire, well I just grounded in the trunk on a metal bolt behind the carpet.

http://superawesomepix.smugmug.com/C...ustang%201.jpg

Awesome, glad I could be some help. Trust me I had a lot of help from another Forum member when I did mine so it cut out a lot of hunting around for where to find all the wire diagrams.

Good job, this will help the next guy for sure.

thanks guys!

yeah, i think i answered all the questions i had for myself in this thread here.

next on the list is the cluster. bought the vmcii a while back, thought i was gonna do the cluster months ago but need some more funds available.

What was the total cost to do this? I don't have any trouble backing up, but it's hard to judge how close I am to something and I figure having this would eliminate that issue.

really depends on where you get your parts and things like that.

If you currently have a spoiler then luckily you already have all the holes in the trunk that are needed.

My project was $155 (shipped) for the mirror, $75 shipped for the spoiler (got a great ebay deal, even came in the right color), $180 to have spoiler repainted (got scuffed up at my house awaiting install lol) and thats it. Oh and that pigtail harness i bought (which is optional) was about $20

so for me, it was a total of 430 or so minus the wiring. would have been a lot less if i was a little more careful with the spoiler when i got it.